International WORKSTAR recalls by model year

Reported: 2011-08-17 (August 17, 2011) · Model years: 2010, 2011, 2012

NAVISTAR IS RECALLING CERTAIN MODEL YEAR 2010-2012 PAYSTAR, WORKSTAR, TRANSTAR, AND PROSTAR COMMERCIAL TRUCKS MANUFACTURED FROM JUNE 1, 2009, THROUGH MAY 31, 2011, EQUIPPED WITH A MAXXFORCE 11 OR 13 ENGINE (FEATURE CODE 12UXJ OR 12UXH) AND WITH ALTERNATOR FEATURE CODE 08GGN, 08GGR, 08 GHG, OR 08GHH. THE ALTERNATOR CABLE MAY RUB ON THE HIGH PRESSURE POWER STEERING HOSE, POSSIBLY CHAFING ITS INSULATION AND CAUSING AN ELECTRICAL SHORT.

Consequence: AN ELECTRICAL SHORT MAY CAUSE A VEHICLE FIRE POSSIBLY RESULTING IN PROPERTY DAMAGE, PERSONAL INJURY, OR DEATH.

Remedy: NAVISTAR WILL INSTALL A BRACKET TO ROUTE THE WIRES AWAY FROM THE POWER STEERING HOSE. NAVISTAR DID NOT PROVIDE AN EXPECTED START DATE FOR THE RECALL, BUT AN INTERIM NOTICE WILL BE MAILED TO OWNERS IF PARTS WILL NOT BE AVAILABLE UNTIL AFTER OCTOBER 14, 2011. OWNERS MAY CONTACT NAVISTAR AT 1-800-448-7825. THIS RECALL CAMPAIGN HAS BEEN SUPERSEDED BY 12V-196.

Reported: 2012-05-02 (May 2, 2012) · Model years: 2010, 2011, 2012, 2013

NAVISTAR IS RECALLING CERTAIN MODEL YEAR 2010 THROUGH 2013 PAYSTAR, WORKSTAR, TRANSTAR, AND PROSTAR, AND MODEL YEAR 2012 AND 2013 LONESTAR COMMERCIAL TRUCKS MANUFACTURED FROM JUNE 1, 2009, THROUGH APRIL 4, 2012, EQUIPPED WITH A MAXXFORCE 11 OR 13 ENGINE (FEATURE CODE 12UXJ OR 12UXH) AND WITH BOSCH ALTERNATOR FEATURE CODES 08GGN, 08GGR, 08GHG, OR 08GHH. THE ALTERNATOR CABLE MAY RUB ON THE HIGH PRESSURE POWER STEERING HOSE, POSSIBLY CHAFING ITS INSULATION AND CAUSING AN ELECTRICAL SHORT.

Consequence: AN ELECTRICAL SHORT MAY CAUSE A VEHICLE FIRE POSSIBLY RESULTING IN PROPERTY DAMAGE, PERSONAL INJURY, OR DEATH.

Remedy: NAVISTAR WILL INSTALL A STANDOFF BRACKET AND IMPROVE HARNESS ROUTING TO BETTER ROUTE THE ALTERNATOR WIRES AWAY FROM THE POWER STEERING HOSE. THE SAFETY RECALL BEGAN ON JULY 16, 2012. OWNERS MAY CONTACT NAVISTAR AT 1-800-448-7825.

Reported: 2011-03-14 (March 14, 2011) · Model years: 2011, 2012

NAVISTAR IS RECALL CERTAIN MODEL YEAR 2011 AND 2012 INTERNATIONAL DURASTAR AND WORKSTAR COMMERCIAL TRUCKS MANUFACTURED FROM OCTOBER 19, 2010, AND FEBRUARY 3, 2011, EQUIPPED WITH GUNITE AUTOMATIC SLACK ADJUSTERS. DUE TO AN INCOMPLETE "KNITTING" OF THE IRON AT THE TIME OF CASTING, INADEQUATE STRUCTURAL INTEGRITY OF THE SLACK ADJUSTER HOUSING CAN OCCUR, WHICH COULD CAUSE THE HOUSING TO BREAK AT THE HANDLE UNDER NORMAL OPERATING LOADS.

Consequence: IF THE SLACK ADJUSTER HOUSING WERE TO BREAK, THE WHEEL BRAKE TO WHICH THE SLACK ADJUSTER IS ATTACHED WOULD NO LONGER FUNCTION, REDUCING BRAKING CAPACITY AND, IN SOME CASES, CAUSING THE VEHICLE TO PULL TO ONE SIDE. REDUCED BRAKING PERFORMANCE AND/OR LOSS OF STEERING CONTROL INCREASES THE RISK OF A CRASH.

Remedy: NAVISTAR WILL NOTIFY OWNERS AND DEALERS WILL REPLACE THE SUBJECT SLACK ADJUSTERS FREE OF CHARGE. THE SAFETY RECALL IS EXPECTED TO BEGIN ON OR ABOUT APRIL 1, 2011. OWNERS MAY CONTACT NAVISTAR AT 1-800-448-7825.

Reported: 2011-04-19 (April 19, 2011) · Model years: 2011, 2012

NAVISTAR IS RECALL CERTAIN MODEL YEAR 2011 AND 2012 INTERNATIONAL DURASTAR, PAYSTAR, WORKSTAR, TRANSTAR, LONESTAR AND PROSTAR COMMERCIAL TRUCKS MANUFACTURED FROM NOVEMBER 5, 2010, THROUGH MARCH 10, 2011, FOR FAILING TO COMPLY WITH FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 121, "AIR BRAKE SYSTEMS (ABS)." THE TRAILER ABS FAULT INDICATOR LAMP IN THE INSTRUMENT CLUSTER WILL NOT ILLUMINATE DUE TO A PROGRAMMING OR HARDWARE ISSUE WITH THE BRAKE SYSTEM ELECTRONIC CONTROL UNIT.

Consequence: AN INOPERABLE TRAILER ABS FAULT INDICATOR MAY PREVENT THE DRIVER FROM BEING AWARE OF A TRAILER ABS FAULT CONDITION THEREBY POSSIBLY INCREASING THE RISK OF A CRASH POTENTIALLY RESULTING IN PROPERTY DAMAGE, PERSONAL INJURY, OR DEATH.

Remedy: NAVISTAR WILL NOTIFY OWNERS. DEALERS WILL REPROGRAM OR REPLACE THE BRAKE SYSTEM ELECTRONIC CONTROL UNIT FREE OF CHARGE. THE SAFETY RECALL BEGAN ON MAY 12, 2011. OWNERS MAY CONTACT NAVISTAR AT 1-800-448-7825.

Reported: 2012-02-13 (February 13, 2012) · Model years: 2011, 2012, 2013

NAVISTAR IS RECALLING CERTAIN MODEL YEAR 2012-2013 IC BUS CE-C, HC, AND INTERNATIONAL 9400 AND CERTAIN MODEL YEAR 2011 THROUGH 2013 INTERNATIONAL DURASTAR, PAYSTAR, WORKSTAR, TRANSTAR, LONESTAR, PROSTAR, 9200, AND 9800, AND CERTAIN MODEL YEAR 2013 INTERNATIONAL 9900, VEHICLES, MANUFACTURED FROM DECEMBER 2, 2010, THROUGH JANUARY 26, 2012, AND EQUIPPED WITH BENDIX ATR-6 TRACTION RELAY VALVES. IN EXTREMELY COLD CONDITIONS, THESE BENDIX RELAY VALVES MAY POTENTIALLY DEVELOP INTERNAL LEAKAGE. INTERNAL LEAKAGE CAN LEAD TO AIR PRESSURE BEING DELIVERED TO AFFECTED PRIMARY OR SECONDARY BRAKES CAUSING CONTINUOUS BRAKE APPLICATION.

Consequence: UNEXPECTED CONTINUOUS BRAKE APPLICATION CAN CAUSE THE BRAKES TO OVERHEAT AND LEAD TO A FIRE. UNEXPECTED CONTINUOUS BRAKE APPLICATION CAN CAUSE THE DRIVER TO LOSE CONTROL OF THE VEHICLE, INCREASING THE RISK OF A CRASH. ALSO, THE BRAKES MAY BE APPLIED WITHOUT ILLUMINATING THE BRAKE LIGHTS, FAILING TO GIVE PROPER WARNING TO OTHER DRIVERS.

Remedy: NAVISTAR WILL NOTIFY OWNERS, AND DEALERS WILL PROVIDE A TEMPORARY REPAIR UNTIL BENDIX DEVELOPS A PERMANENT REMEDY. THIS SERVICE WILL BE PERFORMED FREE OF CHARGE. THE SAFETY RECALL BEGAN ON APRIL 10, 2012. OWNERS MAY CONTACT NAVISTAR AT 1-800-448-7825.

Reported: 2013-04-17 (April 17, 2013) · Model years: 2011, 2012, 2013

Navistar is recalling certain model year 2011-2012 International Lonestar, model year 2012-2013 International Terrastar and model year 2011-2013 International DuraStar, ProStar, TranStar, and WorkStar commercial trucks manufactured from June 1, 2010, through March 7, 2012 and equipped with day cab codes 16CAB, 16030, or 16196 and feature codes 16WCE, 16WCR, 16XWD, 16XWE, 16XWV, 16XXB, 16XXD, 16XXE, 16XXG, or 16XYN sun shades. The sun shade may not be properly secured to the cab roof panel which may result in partial or full separation of the sun shade from the roof panel.

Consequence: If the sun shade separates from the cab roof during vehicle operation, the sudden release of the sun shade could distract the driver increasing the risk of a crash.

Remedy: Navistar will notify owners, and dealers will inspect and strengthen the sun shade mounting, free of charge. The safety recall began on September 10, 2013. Owners may contact Navistar at 1-800-448-7825. Navistar's campaign number is 13505.

Reported: 2015-04-22 (April 22, 2015) · Model years: 2011, 2012, 2013, 2014, 2015

Navistar, Inc. (Navistar) is recalling certain model year 2011-2015 International DuraStar, ProStar, TranStar and WorkStar, 2012-2015 International TerraStar, 2013-2015 International LoneStar and IC Bus HC, and 2014-2015 IC Bus AC vehicles. A vehicle double battery jump start or electrical load dump event could result in an overvoltage condition of a component within the HVAC system linear power module (LPM) which is used to control the blower speed. The overvoltage condition could result in the overheating and failure of the LPM.

Consequence: If the LPM overheats and fails, there is an increased risk of a fire.

Remedy: Navistar will notify owners, and dealers will replace the LPM with an upgraded one, free of charge. An interim letter was mailed to owners on June 18, 2015. A second notification will mailed when parts become available. The recall began on August 6, 2015. Owners may contact Navistar customer service at 1-800-448-7825. Navistar's number for this recall is 15509.

Reported: 2015-06-22 (June 22, 2015) · Model years: 2011, 2012

Navistar, Inc. (Navistar) is recalling certain model year 2010-2014 International Durastar trucks manufactured May 13, 2009, to June 24, 2013, 2011-2012 International Workstar trucks manufactured November 30, 2010, to September 26, 2011, and 2010-2014 IC Bus HC transit buses manufactured November 19, 2009, to April 24, 2013. The affected vehicles may have an improperly routed engine grid heater power feed cable which can result in the cable contacting the metal edge on the cab.

Consequence: If the cable contacts the metal edge of the cab, it may cause an electrical short, increasing the risk of a fire.

Remedy: Navistar will notify owners, and dealers will secure the power feed cable so that it cannot contact the cab, free of charge. The recall began on August 3, 2015. Owners may contact Navistar customer service at 1-800-448-7825. Navistar's number for this recall is 15514.

Reported: 2011-07-21 (July 21, 2011) · Model years: 2012

NAVISTAR IS RECALLING CERTAIN MODEL YEAR 2012 INTERNATIONAL WORKSTAR COMMERCIAL TRUCKS MANUFACTURED FROM FEBRUARY 7, 2011, THROUGH JUNE 7, 2011, AND BUILT WITH DUAL STEERING GEAR FEATURE CODES 05PTB, 05PTE, 05PUA, 05PUB, 05PUC, 05PUD, 05PUE, OR 05PUH. THE FASTENER THAT ATTACHES THE PITMAN ARM TO THE RIGHT SIDE STEERING GEAR MAY NOT HAVE BEEN TIGHTENED TO ITS SPECIFIED TORQUE, OR THE LOCKING FEATURE ASSOCIATED WITH THE FASTENER MAY NOT HAVE BEEN PROPERLY INSTALLED. AN UNDER TORQUE CONDITION AND/OR MISSING LOCKING FEATURE MAY CAUSE A LOOSE CONNECTION POSSIBLY ALLOWING THE PITMAN ARM TO SEPARATE FROM THE STEERING GEAR RESULTING IN LOSS OF STEERING CONTROL.

Consequence: LOSS OF STEERING CONTROL INCREASES THE RISK OF A CRASH THAT MAY RESULT IN PROPERTY DAMAGE, PERSONAL INJURY, OR DEATH.

Remedy: DEALERS WILL INSPECT THE PITMAN ARM/STEERING GEAR CONNECTION, AND EITHER THE CONNECTING FASTENER WILL BE TIGHTENED TO THE CORRECT ASSEMBLY TORQUE OR THE PITMAN ARM WILL BE REPLACED. THIS SERVICE WILL BE PERFORMED FREE OF CHARGE. THE SAFETY RECALL IS EXPECTED TO BEGIN ON OR BEFORE AUGUST 19, 2011. OWNERS MAY CONTACT NAVISTAR AT 1-800-448-7825.

Reported: 2012-03-22 (March 22, 2012) · Model years: 2012, 2013

NAVISTAR IS RECALLING CERTAIN MODEL YEAR 2012 AND 2013 INTERNATIONAL WORKSTAR TRUCKS MANUFACTURED FROM NOVEMBER 15, 2010, THROUGH MARCH 6, 2012, AND EQUIPPED WITH HEADLIGHTS IN THE BUMPER. THE HEADLIGHT BEAM CIRCUIT AND THE GROUND CIRCUIT ARE SWITCHED AT THE HEADLIGHT CONNECTOR. THE SWITCHED CIRCUITS AFFECTS THE HEADLIGHTS WATTAGE, RESULTING IN THE BUMPER HEADLIGHT BEING DIMMER THAN ALLOWED BY FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, "LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT."

Consequence: A DRIVER'S REDUCED VISIBILITY OR THE TRUCK’S REDUCED VISIBILITY DUE TO INADEQUATE HEADLIGHT WATTAGE, MAY INCREASE THE RISK OF A CRASH.

Remedy: NAVISTAR WILL NOTIFY OWNERS, AND DEALERS WILL REPAIR THE VEHICLES FREE OF CHARGE. THE SAFETY RECALL BEGAN ON APRIL 23, 2012. OWNERS MAY CONTACT NAVISTAR AT 1-260-461-1890.

Reported: 2012-08-14 (August 14, 2012) · Model years: 2012, 2013

Navistar is recalling certain model year 2011-2013 International vehicles manufactured from November 2, 2010 through May 25, 2012, equipped with Bendix air disc brakes. Bolts that fasten the air disc brake caliper to the caliper mounting plate may not have been tightended to their specified torque. This may cause the mouting bolts to become loose and possibly allow the air disc brake caliper to separate from the caliper mounting plate, resulting in an unexpected pull condition during braking application or an unexpected increase in stopping distance.

Consequence: An unexpected pull condition during braking application or an unexpected increase in stopping distance, increases the risk of a crash, leading to property damage, personal injury, or death.

Remedy: Navistar will notify owners, and dealers will replace any missing caliper mounting bolts and tighten caliper mounting bolts, free of charge. The safety recall began on October 30, 2012. Owners may contact Navistar at 1-331-332-1590.

Reported: 2012-09-20 (September 20, 2012) · Model years: 2012

Navistar is recalling certain model year 2013 International 8600, 2012 and 2013 Durastar, 2011-2013 ProStar, and 2012 WorkStar trucks, manufactured from November 23, 2010, through April 02, 2012, and equipped with piston spring brake feature code 04EVP. The piston bore area of the parking brake chamber may have an air leak could result in the parking brake not fully releasing.

Consequence: If the parking brake does not fully release, the service brakes may lock up without warning, increasing the risk of a crash.

Remedy: Navistar will notify owners, and dealers will replace the spring brake chamber free of charge. The safety recall began on November 6, 2012. Owners may contact Navistar at 1-331-332-1590.

Reported: 2012-10-18 (October 18, 2012) · Model years: 2012

Navistar is recalling certain model year 2012 International DuraStar and Workstar commercial trucks, manufactured from April 26, 2011, through December 19, 2011, and equipped with a 7 degree passenger seat (feature code 16JAJ or SCBA). During a load test, the front passenger seat separated from its mounting rails. Thus, the vehicles failed to conform to the requirements of Federal Motor Vehicle Safety Standard No. 207, "Seating Systems."

Consequence: In the event of a crash, the seat may may come loose resulting in an increased risk of injury to the seat occupant.

Remedy: Navistar will notify owners, and dealers will replace the seat adjuster rail, anchor plate, and mounting hardware, free of charge. The safety recall began on December 18, 2012. Owners may contact Navistar at 1-800-448-7825.

Reported: 2014-02-20 (February 20, 2014) · Model years: 2012, 2013

Navistar Inc., is recalling certain model year 2012-2013 International Lonestar, Paystar, Prostar, Workstar and 9900 trucks, equipped with feature code 0504501, 0504504, or 04EWM Reduced Stopping Distance (RSD) brake linings and with or without feature code 04WCS Greased For Life front air S-cam brakes. In the affected vehicles, the brake S-cam brackets may fracture.

Consequence: S-cam bracket fractures may result in an inoperative brake on the affected wheel. This will cause the vehicle to pull to one side unexpectedly during braking and/or increase the stopping distance. Either result may increase the risk of a crash.

Remedy: Navistar will notify owners, and dealers will replace the S-cam brake assemblies with a brake assembly with cast spiders and S-cam tube bracket assemblies with reinforced gussets, free of charge. The recall began on March 27, 2014. Owners may contact Navistar at 1-331-332-1590. Navistar's number for this recall 14501. Note: This recall is an expansion of recall 13V231.

Reported: 2012-10-17 (October 17, 2012) · Model years: 2013

Navistar is recalling certain model year 2013 International brand LoneStar, ProStar, and WorkStar commercial trucks, manufactured from April 22, 2012, through October 29, 2012, and equipped with steering wheel feature codes 05CAW, 05CAX, 05CAZ, 05CBA, or 05WBD. The steering wheel may not have been completely welded to its mounting hub.

Consequence: A steering wheel with an incomplete weld may separate from the steering wheel mounting hub, leading to a loss of vehicle control and increasing the risk of a crash.

Remedy: Navistar will notify owners, and dealers will inspect and replace affected steering wheels, free of charge. The safety recall began on November 21, 2012. Owners may contact Navistar at 1-800-448-7825.

Reported: 2013-01-17 (January 17, 2013) · Model years: 2013

Navistar is recalling certain model year 2012-2013 IC Bus brand model 1300FBC, CE, HC, and RE buses; model year 2011-2013 International brand model Durastar, model year 2013 International brand Workstar trucks; model year 2013 Holiday Rambler brand model Ambassador and Endeavor vehicles; and model year 2013 Monaco brand model Diplomat and Knight vehicles. These vehicles were manufactured August 5, 2010 through September 6, 2012 and are equipped with certain 2011-2013 model year I-6 engines with feature codes 12NUK, 12NUL, 12NUM, 12NUN, 12NUP, 12NUR, 12NUS, 12NUT, 12NUU, 12NUV, 12NUX, 12NUY and 12NUZ. The injection pressure regulator (IPR) harness wire may break due to vibrational damage. This could cause an unexpected shut down of the engine.

Consequence: An unexpected engine shut down while driving may increase the risk of a vehicle crash.

Remedy: Navistar will notify owners, and dealers will replace the IPR wire connector free of charge. The safety recall began on March 15, 2013. Owners may contact Navistar at 1-800-448-7825.

Reported: 2014-02-07 (February 7, 2014) · Model years: 2013

Navistar Inc. (Navistar) is recalling certain model year 2010-2011 IC bus 3200, model year 2012 and 2014 IC bus CE and model year 2011-2013 IC bus HC transit buses and model year 2008-2013 International 4300 and model year 2013 International Workstar commercial trucks equipped with Eaton hybrid automated transmissions. The software controlling the affected transmissions may improperly raise the vehicle's engine speed during downshifts without the driver's input.

Consequence: The increase in engine speed may result in unintended acceleration, increasing the risk of a crash.

Remedy: Navistar will notify owners and Eaton authorized service facilities will update the Hybrid Control Module Software version, free of charge. The recall began on May 28, 2014. Owners may contact Navistar at 1-331-332-1590.

Reported: 2014-04-17 (April 17, 2014) · Model years: 2013, 2014, 2015

Navistar, Inc. (Navistar) is recalling certain model year 2013-2015 International DuraStar vehicles manufactured November 2012 through December 2013, International WorkStar vehicles manufactured December 2012 through January 2014, and 2014-2015 International TranStar and International ProStar vehicles manufactured January 2013 through February 2014. The affected vehicles are built with air disc brake feature codes 04WEY, 04WEZ, or 04WZK. These vehicles may have an incorrect number of bolts mounting the brake caliper to the caliper mounting plate and some of the bolts may be improperly torqued.

Consequence: If the air disk brake caliper has loose or missing bolts, the air disk brake caliper may come loose from the mounting plate causing the vehicle to pull left or right while braking and lengthening the distance needed to stop, increasing the risk of a crash.

Remedy: Navistar will notify owners, and dealers will replace any missing bolts and check the torque of all of the air disk brake caliper bolts, free of charge. The recall began on May 7, 2014. Owners may contact Navistar customer service at 1-800-448-7825. Navistar's number for this recall is 14508.

Reported: 2014-12-22 (December 22, 2014) · Model years: 2013, 2014, 2015

Navistar, Inc. (Navistar) is recalling certain model year 2013-2015 International WorkStar vehicles manufactured March 16, 2012, to October 1, 2014. In the affected vehicles, the headlight low beam and ground circuits may have been reversed at the headlight connector resulting in reduced light output. As such, these vehicles fail to comply with Federal Motor Vehicle Safety Standard (FMVSS) No. 108, "Lamps, Reflective Devices, and Associated Equipment."

Consequence: Reduced light output may impair the driver's vision, increasing the risk of a crash.

Remedy: Navistar will notify owners, and dealers will correct the wiring in headlight harness connector, free of charge. The recall began on December 29, 2014. Owners may contact Navistar customer service at 1-800-448-7825. Navistar's number for this recall is 14525.

Reported: 2015-11-20 (November 20, 2015) · Model years: 2013, 2014

Navistar, Inc. is recalling certain model year 2013-2014 International ProStar and DuraStar trucks manufactured April 26, 2012, to April 4, 2013, WorkStar trucks manufactured April 27, 2012, to March 29, 2013, LoneStar trucks manufactured May 21, 2012, to April 2, 2013, and TranStar trucks manufactured April 30, 2012, to March 25, 2013. In the affected vehicles, the accelerator pedal position sensor can move and result in a high engine idle.

Consequence: A high engine idle may make downshifting the transmission difficult and the engine brake may be disabled. These factors may hinder slowing down the truck when descending a long grade, thereby increasing the risk of a crash.

Remedy: Navistar will notify owners, and dealers will recalibrate the electronic control module (ECM) to allow it to recognize that the pedal is at the idle position, free of charge. The recall began on January 19, 2016. Owners may contact Navistar customer service at 1-800-448-7825. Navistar's number for this recall is 15517.

Reported: 2015-03-23 (March 23, 2015) · Model years: 2015, 2016

Navistar, Inc. (Navistar) is recalling certain model year 2015-2016 International 9900, DuraStar, LoneStar, PayStar, ProStar, WorkStar and 2015 International TranStar and IC Bus CE vehicles equipped with a Haldex air braking system. The affected brake actuators may have been manufactured with an incomplete attachment of the internal rubber diaphragm to the actuation mechanism. This could cause dragging or overheated brakes.

Consequence: If the brakes drag and overheat there is an increased risk of a wheel end fire.

Remedy: Navistar will notify owners, and dealers will replace the Haldex Life Seal Brake chambers, free of charge. The recall began on June 19, 2015. Owners may contact Navistar customer service at 1-800-448-7825. Navistar's number for this recall is 15504. Note: This recall supersedes recall 14V-806.

Reported: 2020-12-23 (December 23, 2020) · Model years: 2015, 2016, 2017, 2018

Navistar, Inc. (Navistar) is recalling certain 2019-2021 International MV, 2020-2021 International HV, 2014-2020 International DuraStar and 2015-2018 International WorkStar vehicles. When the parking brake is applied and the automatic transmission is still in the drive or reverse position and the stationary PTO switch is engaged by the operator, the engine may rev and overcome the parking brake's ability to keep the vehicle from moving.

Consequence: Unexpected Vehicle movement can increase the risk of a crash or injury.

Remedy: Navistar will notify owners, and dealers will update the parameters in the Cummins ECM for feature codes 12VXT or 12VXU that enables the PTO neutral interlock, free of charge. The recall began February 17, 2021. Owners may contact Navistar customer service at 1-800-448-7825. Navistar's number for this recall is 20510.

Reported: 2015-04-29 (April 29, 2015) · Model years: 2016

Navistar, Inc. (Navistar) is recalling certain model year 2016 International PayStar trucks manufactured January 19, 2015, to January 20, 2015, and 2016 International WorkStar trucks manufactured on January 19, 2015. The affected vehicles are equipped with Meritor MT-40-14X rear drive axles that may circulate an inadequate amount of lubricant to the wheel end hub assembly.

Consequence: Without adequate lubrication to the wheel end hub assembly, the bearings may fail prematurely, increasing the risk of a crash.

Remedy: Navistar has already repaired the affected vehicles, free of charge. The recall was completed in April 2015. Owners may contact Navistar customer service at 1-800-448-7825.

Reported: 2017-09-20 (September 20, 2017) · Model years: 2016

Navistar, Inc. (Navistar) is recalling certain 2016 International DuraStar, LoneStar, ProStar, TerraStar, TranStar, WorkStar, 9900i, and IC Bus HC vehicles equipped with certain Spicer D or E series steer axles. The castellated nut on the steer axles may not be properly torqued, allowing the tie rod to loosen.

Consequence: If the tie rod loosens, it may disconnect from the steering knuckle, causing a complete loss of steering, increasing the risk of a crash.

Remedy: Navistar will notify owners, and dealers will inspect the torque of the castellated nut and tie rod, tightening it as necessary, free of charge. The recall began on November 8, 2017. Owners may contact Navistar customer service at 1-331-332-1590. Navistar's number for this recall is 17507.

Reported: 2019-03-20 (March 20, 2019) · Model years: 2017, 2018, 2019, 2020

Navistar, Inc. (Navistar) is recalling certain 2017-2020 International DuraStar and WorkStar, 2018-2020 IC Bus CECB, International HV and MV, 2018-2019 IC Bus 1300 FBC and HCCB, and 2019-2020 IC Bus TCCB vehicles equipped with Cummins B6.7 diesel engines with fuel module option number FS90301 or FS90453. The electric fuel heater within the fuel module may overheat and cause plastic in the fuel heater to melt and potentially catch fire. It may also lead to engine stalling.

Consequence: A fire increases the risk of injury. An engine stall can increase the risk of crash.

Remedy: Cummins will notify the affected Navistar owners. Cummins dealers will replace the fuel heater with a newly designed fuel heater, free of charge. The recall began May 2, 2019. Owners may contact Cummins customer service at 1-800-286-6467 or Navistar customer service at 1-800-448-7825.

Reported: 2019-03-26 (March 26, 2019) · Model years: 2017, 2018

Custom Fab & Body LLC (Custom Fab & Body) is recalling certain 2018 Ford F-650 XLT Crew Cab, 2017-2018 International 7500 4x4, and 2018 International 7500 4x2, Freightliner M2-112 and M2-106, and Kenworth T-370-based emergency vehicles equipped with Whelen brake lights. Depending on the specific wiring of the vehicle, these brake lights may illuminate when the brake pedal has not been pressed. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 108, "Lamps, Reflective Devices, and Associated Equipment."

Consequence: If the brake lights incorrectly illuminate, it can confuse other drivers, possibly increasing the risk of a crash.

Remedy: Custom Fab & Body has notified owners, instructing them to contact Whelen for replacement lights, free of charge. The recall began April 11, 2019. Owners may contact Whelen customer service at 1-860-526-9504.

Reported: 2020-04-17 (April 17, 2020) · Model years: 2017, 2018, 2019, 2020

Navistar, Inc. (Navistar) is recalling certain 2017-2020 International WorkStar and International DuraStar, 2018-2019 IC 1300 FBC Commercial and IC HC Commercial, 2018-2021 IC CE Commercial, International MV and International HV, and 2019-2021 IC TC Commercial buses with Cummins B6.7 diesel engines with a fuel module option number FS90301 or FS90453. The electric fuel heater within the fuel module may overheat and cause plastic in the fuel heater to melt and potentially catch fire. It may also lead to engine stalling.

Consequence: A fire increases the risk of injury. An engine stall can increase the risk of a crash.

Remedy: Cummins will notify the affected Navistar customers and dealers will disable the fuel heater by either installing a plug in place of the heater or otherwise rendering the fuel heater inoperable and removing the fuse supplying electrical power to the fuel heater and installing a cover over the wire harness connector, free of charge. The recall began May 28, 2020. Owners may contact Cummins customer service at 1-800-286-6467.

Reported: 2023-04-06 (April 6, 2023) · Model years: 2017, 2018, 2019, 2020

Navistar, Inc. (Navistar) is recalling certain 2016-2017 International TranStar, 2017-2019 International ProStar, International LoneStar, 2017-2020 International DuraStar, WorkStar, and 2018-2019 IC Bus HC Commercial buses. The heating, ventilation, and air-conditioning (HVAC) blower motor circuit may have an insufficient wiring terminal that can overheat.

Consequence: An overheated electrical circuit can increase the risk of a fire.

Remedy: Dealers will replace the HVAC blower motor load circuit wiring terminal, free of charge. Owner notification letters are expected to be mailed June 5, 2023. Owners may contact Navistar's customer service at 1-800-448-7825. Navistar's number for this recall is 23510.

Reported: 2018-05-03 (May 3, 2018) · Model years: 2018, 2019

Navistar, Inc. (Navistar) is recalling certain 2018-2019 International WorkStar, DuraStar, LoneStar, LT, ProStar, RH and IC Bus HC, 2018 International TranStar, 2019 International HV and MV trucks and transit buses. The front driver and passenger seat belt anchor D-ring bolt may break in the event of a crash. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 210, "Seat Belt Assembly Anchorages."

Consequence: If the D-ring bolt breaks during a crash, the seat occupant may not be properly restrained, increasing their risk of injury.

Remedy: Navistar has notified owners, and dealers will replace the D-ring bolt depending on the information found on the seat belt label, free of charge. The recall began May 23, 2018. Owners may contact Navistar customer service at 1-800-448-7825. Navistar's number for this recall is 18505.

Reported: 2018-11-21 (November 21, 2018) · Model years: 2018, 2019

Navistar, Inc. (Navistar) is recalling certain 2019 International HV, MV, 2018-2019 HX, LT, RH, LoneStar, ProStar, WorkStar, and 2018 TranStar automated manual transmission vehicles, equipped with certain Eaton ECA heavy-duty truck clutches. An internal component in the clutch assembly may fail, possibly resulting in unintended vehicle movement.

Consequence: Unintended vehicle movement can increase the risk of a crash.

Remedy: Navistar will notify owners, and dealers will recalibrate the Transmission Control Module (TCM), free of charge. The recall began January 18, 2019. Owners may contact Navistar customer service at 1-800-448-7825. Navistar's number for this recall is 18518.

Reported: 2019-11-21 (November 21, 2019) · Model years: 2018, 2019, 2020

Navistar, Inc. (Navistar) is recalling certain 2019-2020 International MV and HV, 2018-2020 Workstar, and 2018-2019 Durastar vehicles equipped with feature codes 12VXT and 12VXU. With the parking brake applied and the automatic transmission in the 'Drive' or 'Reverse' position, when the stationary PTO switch is engaged by the operator, the engine RPM will ramp up and may overcome the parking brake's ability to hold the vehicle.

Consequence: Unintended vehicle movement increases the risk of a crash.

Remedy: Navistar will notify owners, and dealers will update the Engine Control Module to enable the PTO neutral interlock, free of charge. The recall began January 16, 2020. Owners may contact Navistar customer service at 1-800-448-7825. Navistar's number for this recall is 19518.

Reported: 2021-05-19 (May 19, 2021) · Model years: 2018, 2019

Navistar, Inc. (Navistar) is recalling certain 2018-2019 International WorkStar, International DuraStar, 2019-2021 International HV, International MV, and IC Bus RE Commercial Bus vehicles. The sealing washer may not seat correctly in the pilot bore holes, allowing the high pressure fuel rail assembly to leak.

Consequence: A fuel leak in the presence of an ignition source increases the risk of a fire.

Remedy: Dealers will inspect the rail threads, and replace the rail as necessary, free of charge. Owner notification letters were mailed on June 21, 2021. Owners may contact Navistar customer service at 1-800-448-7825.

Reported: 2018-09-07 (September 7, 2018) · Model years: 2019

Navistar, Inc. (Navistar) is recalling certain 2019 International HX, DuraStar, WorkStar, HV, LoneStar, LT, MV, and RH vehicles, and IC Bus HC, CE, and RE vehicles equipped with long stroke brake chambers and spring actuated parking brakes. The spring actuated parking brake may be improperly crimped to the long stroke service brake chamber, causing a service brake air leak and the possible separation of the spring brake chamber from the service brake section.

Consequence: An air leak or separation of the spring brake chamber can increase the needed stopping distance, increasing the risk of a crash.

Remedy: Navistar will notify owners, and dealers will replace the brake chamber assemblies from the suspected lot, free of charge. The recall began October 23, 2018. Owners may contact Navistar customer service at 1-800-448-7825. Navistar's number for this recall is 18512.

Reported: 2020-04-22 (April 22, 2020) · Model years: 2019

Navistar, Inc. (Navistar) is recalling certain 2019 International WorkStar and International HV vehicles equipped with Meritor MX-14-120 EVO steer axles. The axles may have insufficient lubrication, which may result in damage to the wheel end bearings.

Consequence: If the bearings are damaged, the wheel may separate and cause a sudden loss of vehicle control, increasing the risk of crash.

Remedy: Navistar will notify owners, and dealers will inspect the steer axle wheel hubs for proper fluid level and repair any damaged wheel end components and spindles, as necessary, free of charge. The recall began May 1, 2020. Owners may contact Navistar customer service at 1-800-448-7825. Navistar's number for this recall is 20503.

Reported: 2025-03-21 (March 21, 2025) · Model years: 2019

International Motors, LLC (International) is recalling certain 2024 HV, 2020-2025 MV, and 2019 Workstar 7400 trucks. The caliper may contact a suspension spring or axle U-bolt and prevent the outer brake pad from functioning.

Consequence: A loss of outer brake pad function can extend the vehicle's stopping distance, increasing the risk of a crash.

Remedy: Dealers will switch the left and right rear air disc brake calipers, replace the rear brake torque plates, and replace the brake pads, free of charge. Owner notification letters were mailed May 12, 2025. Owners may contact International customer service at 1-800-448-7825. International's number for this recall is 25501.

Reported: 2022-06-16 (June 16, 2022) · Model years: 2022

Navistar, Inc. (Navistar) is recalling certain 2022-2023 International HX, HV, LoneStar, LT, MV, RH, IC TC Commercial Bus, and 2022 International WorkStar vehicles. The steering gears may have been assembled incorrectly, which can cause the gear to fracture.

Consequence: A fractured steering gear can cause a loss of steering control, increasing the risk of a crash.

Remedy: Dealers will inspect the steering gear serial numbers, and replace the steering gears as necessary, free of charge. Interim owner notification letters were mailed August 18, 2022. Remedy parts are expected to become available in mid-October 2022. Owners may contact Navistar customer service at 1-800-448-7825. Navistar's number for this recall is 22513.