Ford ECONOLINE recalls by model year

Reported: 1967-05-10 (May 10, 1967) · Model years: 1967

Reported: 1968-09-30 (September 30, 1968) · Model years: 1969

Reported: 1969-03-24 (March 24, 1969) · Model years: 1969

Reported: 1969-05-07 (May 7, 1969) · Model years: 1969

Reported: 1971-08-02 (August 2, 1971) · Model years: 1971

Reported: 1972-11-07 (November 7, 1972) · Model years: 1972

Reported: 1977-06-27 (June 27, 1977) · Model years: 1975, 1976, 1977

THE INSTRUMENT PANELS ON THE INVOLVED VEHICLES CAN BE BROKEN DURING OCCUPANT IMPACT.

Remedy: THE DEALER WILL INSTALL A FIELD-INSTALLABLE PANEL PAD, FREE OF CHARGE, ON ALL AFFECTED VEHICLES.

Reported: 1976-11-23 (November 23, 1976) · Model years: 1977

Reported: 1977-10-25 (October 25, 1977) · Model years: 1978

ON THE INVOLVED VEHICLES, THE PARK ACTUATION SUPPORT PLATES ARE DEFECTIVE DUE TO THEIR SUSCEPTIBILITY TO CRACKING DUE TO IMPROPER HEAT TREATMENT DURING MANUFACTURE. AS A RESULT, FRAGMENTS FROM A BROKEN PLATE CAN BECOME LODGED IN THE TRANSMISSION PARKING PAWL MECHANISM. THIS COULD PREVENT THE TRANSMISSION PARKING PAWL FROM ENGAGING WHEN THE SELECTOR LEVER IS PLACED IN THE "PARK" POSITION, OR PREVENT THE PAWL FROM BEING DISENGAGED FROM THE PARK GEAR.

Remedy: THE DEALER WILL REPLACE THE PARK ACTUATION CAM SUPPORT PLATES, FREE OF CHARGE, ON ALL AFFECTED VEHICLES.

Reported: 1978-09-15 (September 15, 1978) · Model years: 1979

THESE TRANSMISSIONS MAY CONTAIN IMPROPERLY MANUFACTURED PARKING PAWL ACTUATING RODS. CONSEQUENTLY, THE UNHARDENED CAM SURFACE OF THESE RODS CAN ALLOW THE ROD TO DEFORM DURING USE WITH RESULTANT INCREASE IN SHIFT EFFORTS AND DIFFICULTY IN RELEASING THE PARKING PAWL AND ENGAGING THE PARKING GEAR.

Remedy: DEALER WILL REPLACE THE TRANSMISSION PARKING PAWL ACTUATING ROD WITHOUT CHARGE TO OWNER.

Reported: 1978-11-27 (November 27, 1978) · Model years: 1979

THE INVOLVED VEHICLES WERE EQUIPPED WITH AUTOMATIC TRANSMISSIONS IN WHICH THE PARKING PAWL WAS NOT HEAT-TREATED. DURING NORMAL VEHICLE OPERATION, A PARKING PAWL THAT HAS NOT BEEN HEAT-TREATED COULD BECOME DEFORMED OR WORN TO THE POINT THAT THE TRANSMISSION WILL NOT LOCK IN "PARK". AS A RESULT, THE VEHICLE COULD ROLL FREE IF THE DRIVER DOES NOT SET THE PARKING BRAKE WHEN PARKING OR LEAVING VEHICLE UNATTENDED.

Remedy: DEALER WILL INSPECT AND, IF NECESSARY, REPLACE THE PARKING PAWL WITH ONE THAT HAS BEEN HEAT-TREATED.

Reported: 1978-12-21 (December 21, 1978) · Model years: 1979

THE STEERING GEARS ON THE INVOLVED VEHICLES MAY HAVE BEEN BUILT WITH IMPROPERLY MANUFACTURED SECTOR SHAFTS FROM WHICH THE THREADED PORTIONS OF THE SHAFTS MAY FRACTURE AND SEPARATE. SHOULD THE SECTOR SHAFT FRACTURE, THE PITMAN ARM MAY DISENGAGE FROM THE SPLINED PORTION OF THE SECTOR SHAFT.

Remedy: THE DEALER WILL INSPECT AND, IF NECESSARY, REPLACE THE STEERING GEAR ASSEMBLY OR INSTALL A NEW SECTOR SHAFT IN THE STEERING GEAR ASSEMBLY.

Reported: 1979-05-15 (May 15, 1979) · Model years: 1979

THE INVOLVED VEHICLES WERE PRODUCED WITH BRAKE PUSH-ROD TO BRAKE PEDAL RETAINING PINS WHICH WERE NOT HEAT-TREATED AS SPECIFIED. THIS COULD ALLOW THE BRAKE PEDAL TO BECOME DISENGAGED FROM THE PUSH-ROD.

Remedy: DEALER WILL REPLACE THE SUSPECT BRAKE RETAINING PIN.

Reported: 1979-06-19 (June 19, 1979) · Model years: 1979

THE INCORRECTLY INSTALLED LEFT FRONT BRAKE HOSES MAY ALLOW FOR CONTACT BETWEEN THE FRONT BRAKE HOSES AND THE FRONT TIRES WHEN THE FRONT WHEELS ARE IN FULL RIGHT OR LEFT TURN POSITIONS. IF CONTACT IS MADE, THE HOSE COULD WEAR AND ALLOW BRAKE FLUID TO LEAK OUT.

Remedy: THE DEALER WILL INSPECT FRONT BRAKE HOSES AND REPLACE THOSE LACKING THE PROPER CLEARANCE WITH CURRENT PRODUCTION HOSES, WITHOUT CHARGE TO OWNER.

Reported: 1979-06-19 (June 19, 1979) · Model years: 1979

CERTAIN VEHICLES MAY NOT CONTAIN THE SPECIFIED BODY MOUNTED HEAT SHIELDS. THIS COULD CAUSE HIGH FLOOR PAN TEMPERATURES WHEN THE ENGINE IS IDLED FOR EXTENDED PERIODS OF TIME. FOULED SPARK PLUGS OR OTHER ENGINE CONDITIONS COULD FURTHER INCREASE EXHAUST TEMPERATURES.

Remedy: THE DEALER WILL INSTALL THE NECESSARY FRAME MOUNTED HEAT SHIELD, IF MISSING.

Reported: 1979-08-07 (August 7, 1979) · Model years: 1979

THE WHEEL ASSEMBLY MAY CONTAIN SUBSTANDARD WELDS IN THE AREA WHERE THE DISC IS ATTACHED TO THE RIM. AS A RESULT, CRACKS CAN FORM IN THE WHEEL ASSEMBLY, CAUSING AIR LOSS AND AN UNDERINFLATED TIRE.

Remedy: DEALER WILL INSPECT AND REPLACE ANY DEFECTIVE WHEELS WITHOUT CHARGE TO OWNER.

Reported: 1979-12-18 (December 18, 1979) · Model years: 1980

THE PARKING PAWL ACTUATING ROD IN THE TRANSMISSION MAY HAVE AN INSUFFICIENT OR CRACKED WELD. THIS CAN CAUSE THE PARK CAM END TO SEPARATE FROM THE ROD ITSELF, PREVENTING THE PARKING PAWL FROM ENGAGING THE PARKING GEAR WHEN THE SELECTOR IS PLACED IN THE PARK POSITION.

Remedy: DEALER WILL REPLACE THE DEFECTIVE PARKING PAWL ACTUATING ROD FREE OF CHARGE.

Reported: 1980-06-09 (June 9, 1980) · Model years: 1980

CERTAIN VEHICLES WERE PRODUCED WITH WHEEL ASSEMBLIES THAT MAY HAVE CRACKS NEAR THE BOLT HOLES IN THE WHEEL DISC. DURING VEHICLE USE, THE CRACKS COULD GRADUALLY INCREASE AND RESULT IN PARTIAL OR COMPLETE SEPARATION OF THE WHEEL AND TIRE ASSEMBLY FROM THE VEHICLE.

Remedy: DEALER WILL INSPECT THE WHEEL DISC DATE CODE AND REPLACE THOSE WHEELS INDICATING AN OCTOBER 18, 1979 DATE OF MANUFACTURE.

Reported: 1980-09-19 (September 19, 1980) · Model years: 1980

CERTAIN VEHICLES WERE EQUIPPED WITH FRONT BRAKE HOSE ASSEMBLIES THAT WERE INCORRECTLY MANUFACTURED BY THE SUPPLIER. THESE ASSEMBLIES, BOTH RH AND LH, WERE INCORRECTLY BUILT WITH THE FITTINGS MISORIENTED BY 90 DEGREES. THIS COULD CAUSE CHAFING OF THE BRAKE HOSE THROUGH CONTACT WITH THE ADJACENT TIRE DURING FULL TURNS. CONTINUED CHAFING COULD RESULT IN A BRAKE FLUID LEAK.

Remedy: DEALER WILL INSPECT BOTH FRONT BRAKE HOSES AND, IF NECESSARY, REPLACE ONE OR BOTH HOSES AT NO CHARGE.

Reported: 1981-04-01 (April 1, 1981) · Model years: 1981

THE GEAR POSITION INDICATORS ON CERTAIN VEHICLES MAY BE TOO SHORT TO BE READILY VISIBLE TO SOME DRIVERS. THIS IS NOT IN COMPLIANCE WITH FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 101, "CONTROLS AND DISPLAY", WHICH STATES THAT THE GEAR POSITION DISPLAY MUST BE VISIBLE TO DRIVER.

Remedy: IF POINTER OF GEAR POSITION INDICATOR IS FOUND TO BE TOO SHORT, IT WILL BE REPLACED WITHOUT CHARGE TO OWNER.

Reported: 1981-09-09 (September 9, 1981) · Model years: 1982

THE INVOLVED VEHICLES MAY NOT MEET THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 301, "FUEL SYSTEM INTEGRITY". IN A MOVING BARRIER IMPACT TEST FROM THE REAR AT 30 MPH, THE FASTENER ATTACHING THE FUEL SENDER GROUND WIRE TO THE FRAME CROSSMEMBER, AFT OF THE FUEL TANK, PIERCED THE FUEL TANK.

Remedy: THE FUEL SENDER GROUND WIRE ATTACHMENT ON ALL AFFECTED VEHICLES WILL BE RELOCATED TO ELIMINATE THE DANGER, WITHOUT CHARGE TO OWNER.

Reported: 1982-01-13 (January 13, 1982) · Model years: 1982

ON SOME OF THE INVOLVED VEHICLES, THE SHIFT ROD IN THE TRANSMISSION MAY NOT BE PROPERLY SEATED IN THE RETENTION GROMMET OF THE STEERING COLUMN SHIFT LEVER ASSEMBLY. IF THE SHIFT ROD WERE TO DISENGAGE, THE DRIVER COULD NOT SELECT THE PROPER TRANSMISSION FUNCTION WHICH WOULD CREATE THE POTENTIAL FOR UNEXPECTED MOVEMENT OF THE VEHICLE.

Remedy: DEALER WILL INSPECT THE SHIFT ROD ATTACHMENT AND MAKE SURE IT IS PROPERLY SEATED AT NO COST TO OWNER.

Reported: 1982-12-13 (December 13, 1982) · Model years: 1983

SOME OF THE INVOLVED VEHICLES MAY HAVE A DIODE IN THE ELECTRICAL FUEL PUMP CIRCUIT THAT MAY SHORT DURING ENGINE STARTING DUE TO INADEQUATE CAPACITY TO WITHSTAND CURRENT DRAW. A SHORT CIRCUIT WOULD RESULT IN NORMAL ENGINE STARTING, BUT THE PUMP WILL NOT CONTINUE TO SUPPLY THE ENGINE WITH FUEL.

Remedy: THE DEALER WILL REPLACE DEFECTIVE ELEMENT IN THE ELECTRICAL FUEL PUMP CIRCUIT WITH A NEW RELAY FEED WIRING ASSEMBLY WHICH CONTAINS A LARGER CAPACITY DIODE, FREE OF CHARGE.

Reported: 1983-03-07 (March 7, 1983) · Model years: 1983

THE PARKING GEAR MAY NOT ENGAGE, EVEN THOUGH THE GEAR SHIFT LEVER IS PLACED IN THE "PARK" POSITION. THIS OCCURS IF THE LINKAGE INSIDE THE TRANSMISSION THAT ACTUATES THE PARK GEAR WAS IMPROPERLY MANUFACTURED. A PIN THAT RETAINS COMPONENTS ON A LINKAGE (ACTUATING) ROD COULD BREAK AND THE LINKAGE MAY NOT ENGAGE THE PARKING GEAR.

Remedy: DEALER WILL INSPECT AND, IF NECESSARY, REPLACE THE PARKING PAWL ACTUATING ROD ASSEMBLY.

Reported: 1985-05-14 (May 14, 1985) · Model years: 1983, 1984, 1985

WHEN FRONTALLY IMPACTED INTO A FIXED BARRIER AT 30 MPH, AS SPECIFIED IN FEDERAL MOTOR VEHICLE SAFETY STANDARD (FMVSS) NO. 301, THE LEFT FRAME RAILS OF SUCH VEHICLES MAY DISPLACE INBOARD, PINCHING THE FUEL/WATER SEPARATOR CANISTER BETWEEN THE FRAME RAIL AND ENGINE SUFFICIENTLY TO DISPLACE THE FUEL/WATER SEPARATOR DRAIN ROD, ALLOWING THE CONTENTS OF THE CANISTER TO DRAIN. CONSEQUENCE OF DEFECT: FUEL LEAK DURING OR AFTER A CRASH INCREASES THE POSSIBILITY OF A FIRE.

Remedy: INSTALL A CANISTER SHIELD, A REVISED DESIGN DRAIN ROD SHIELD, AND MODIFY FUEL/WATER SEPARATOR MOUNTING BRACKET.

Reported: 1987-07-21 (July 21, 1987) · Model years: 1983, 1984, 1985, 1986, 1987

EXPULSION OF FUEL DUE TO OVERPRESSURIZATION.

Consequence: FUEL OR FUEL VAPORS IN THE PRESENCE OF AN IGNITIONSOURCE CAN CAUSE A FIRE.

Remedy: MODIFICATION OF THE BASE FUEL VENTING AND EMISSION CONTROL SYSTEM TO REDUCE OPERATING TEMPERATURES AND FUEL SYSTEM PRESSURES.

Reported: 1987-09-09 (September 9, 1987) · Model years: 1983, 1984, 1985, 1986, 1987

VEHICLES ARE SUBJECT TO EXCESSIVE UNDERHOOD TEMPERATURES AND FUEL SYSTEM PRESSURES IN SEVERE DUTY APPLICATIONS.

Consequence: THIS CREATES POTENTIAL FOR FUEL EXPULSION FROM THE FUELFILLER PIPE WHICH IN THE PRESENCE OF AN IGNITION SOURCE, COULD RESULT IN AFIRE.

Remedy: INSTALL MODIFICATION KITS TO MINIMIZE POSSIBILITY OF FUEL EXPULSION AND TO SHIELD UNDERBODY COMPONENTS FROM EXHAUST SYSTEM HEAT.

Reported: 1984-01-07 (January 7, 1984) · Model years: 1984

SOME VEHICLES MAY HAVE BEEN BUILT WITH IMPROPERLY MANUFACTURED WHEELS. THE WELDS SECURING THE CENTER SECTIONS TO THE RIMS MAY CRACK FROM FATIGUE.

Remedy: AFFECTED WHEELS WILL BE REPLACED.

Reported: 1984-10-02 (October 2, 1984) · Model years: 1984

THE SECONDARY THROTTLE SHAFT MAY, WITH ACCUMULATED MILEAGE, BECOME CONTAMINATED AND MAY STICK IN A PARTIALLY OPEN POSITION WHILE DRIVING.

Consequence: CONSEQUENCE OF DEFECT: THIS STICKING COULD RESULT IN A FASTER SPEED THAN INTENDED, POSSIBLY RESUTLING IN AN ACCIDENT.

Remedy: THE PRIMARY TO SECONDARY THROTTLE CLOSURE LINK ON THE CARBURETOR WILL BE REPLACED FREE OF CHARGE.

Reported: 1987-07-16 (July 16, 1987) · Model years: 1984, 1985, 1986, 1987

FUEL LEAK AT THE TOP OF THE FRONT FUEL TANK IN THE AREA OF THE VAPOR VALVE GROMMET. GROMMET MAY SPLIT DUE TO COMPRESSIVE LOAD WHEN INSTALLED IN THE FUEL TANK.

Consequence: FUEL MAY LEAK FROM VAPOR VALVE AND BECOME THE SOURCE OFFUEL FOR A FIRE.

Remedy: INSTALLATION OF A NEWLY DESIGNED VAPOR VALVE GROMMET.

Reported: 1986-07-15 (July 15, 1986) · Model years: 1985, 1986

THE RUBBER THAT ENCASES BALL STUD AND SOCKET JOINT (CONNECTS STEERING DRAG LINK AND PITMAN ARM) MAY DETERIORATE, CAUSING METAL TO METAL CONTACT, AND MAY EVENTUALLY RESULT IN COMPLETE SEPARATION. CONSEQUENCE OF DEFECT: COMPLETE SEPARATION OF THE DRAG LINK TO PITMAN ARM CONNECTION RESULTS IN LOSS OF STEERING CONTROL WHICH MAY LEAD TO AN ACCIDENT.

Remedy: INSTALL NEW DRAG LINK ASSEMBLIES WITH STEEL BALL AND SOCKET JOINTS AT THE PITMAN ARM CONNECTIONS.

Reported: 1987-09-04 (September 4, 1987) · Model years: 1986, 1987

SPRING LOCK FUEL LINE COUPLING MAY NOT BE PROPERLY ENGAGED.

Consequence: COUPLING COULD DISENGAGE DUE TO FUEL PRESSURE,VIBRATION, AND ENGINE MOVEMENTS; THIS WOULD CAUSE LOSS OF FUEL WHICH, INPRESENCE OF AN IGNITION SOURCE, CREATES A FIRE RISK.

Remedy: INSTALL RETAINER CLIPS OVER THE COUPLINGS TO PREVENT COUPLING SEPARATION AND FUEL LEAKAGE.

Reported: 1990-06-01 (June 1, 1990) · Model years: 1989, 1990

UNDER CERTAIN CONDITIONS, THE SNAP RING THAT LOCATES THE PARK GEAR ON THE OUTPUT SHAFT OF THE TRANSMISSION MAY FRACTURE.

Consequence: WHEN THE GEAR IS PLACED IN PARK, THE PARK GEAR WOULD NOTENGAGE, ALLOWING THE TRUCK TO ROLL FREELY IF THE PARKING BRAKE IS NOT PROPERLYSET. THIS COULD RESULT IN AN ACCIDENT.

Remedy: INSTALL IMPROVED SNAP RING AND REVISED TRANSMISSION EXTENSION HOUSING.

Reported: 1991-09-04 (September 4, 1991) · Model years: 1989, 1990, 1991

THE DUAL FUEL TANK SELECTOR VALVE MAY MALFUNCTION AND CAUSE AN OVERFILL CONDITION IN ONE OF THE FUEL TANKS, RESULTING IN AN OVERFLOW OF FUEL PAST THE FILLER CAP.

Consequence: THE OVERFLOW OF FUEL PAST THE FILLER CAP CAUSES A FUELLEAKAGE, WHICH CAN RESULT IN A FIRE WHEN EXPOSED TO A SOURCE OF IGNITION.

Remedy: REPLACE THE DUAL FUEL TANK SELECTOR VALVE.

Reported: 1992-05-04 (May 4, 1992) · Model years: 1990, 1991

THE SAFETY BELT ANCHORAGE FOR THE REAR BENCH SEAT FAILED TO COMPLY WITH THE STANDARDS OF FMVSS 210.

Consequence: FAILURE TO MEET THE LOAD REQUIREMENTS OF FMVSS 210 PLACETHE SEAT OCCUPANTS IN INCREASED RISK OF INJURY IN THE EVENT OF A SUDDEN STOPOR ACCIDENT.

Remedy: THE MANUFACTURE WILL REPLACE THE NON-COMPLYING SAFETY BELT ANCHORAGE WITH A NEW ANCHORAGE THAT MEETS THE REQUIREMENTS OF FMVSS 210.

Reported: 1993-04-27 (April 27, 1993) · Model years: 1990, 1991

THE REAR SHOCK CROSSMEMBER OF THE FRAME CAN CRACK AND SEPARATE FROM THE FRAME.

Consequence: SEPARATION OF THE REAR SHOCK CROSSMEMBER FROM THE FRAMECAN RESULT IN LOSS OF VEHICLE CONTROL AND AN ACCIDENT.

Remedy: REPLACE THE REAR CHOCK CROSSMEMBER WITH A SHOCK CROSSMEMBER MADE OF HIGH STRENGTH STEEL.

Reported: 2008-02-04 (February 4, 2008) · Model years: 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003

FORD IS RECALLING 225,000 MY 1992-2003 ECONOLINE, MY 1993-1995 TAURUS SHO, MY 1992-1998 CROWN VICTORIA, MY 1993 BRONCO, F-SERIES, MY 1995-1997 F-SERIES SUPER DUTY STRIPPED CHASSIS, MY 1992-1998 MERCURY GRAND MARQUIS, AND MY 1992-1995 LINCOLN TOWN CAR VEHICLES. THE AFFECTED VEHICLES WERE PREVIOUSLY REPAIRED USING A WIRING HARNESS THAT IS NOT COMPATIBLE WITH THE VEHICLE CIRCUIT POLARITY.

Consequence: AS A RESULT, THE FUSE IS LOCATED IN THE OUTPUT CIRCUIT RATHER THAN IN THE INTENDED INPUT POWER FEED CIRCUIT, AND MAY NOT OFFER THE INTENDED PROTECTION IN THE EVENT OF AN ELECTRICAL SHORT TO GROUND.

Remedy: DEALERS WILL INSTALL A NEW WIRING HARNESS, OR REPLACE THE MATING ELECTRICAL COMPONENT. THE RECALL BEGAN ON FEBRUARY 18, 2008. OWNERS MAY CONTACT FORD AT 1-800-392-3673.

Reported: 1992-08-24 (August 24, 1992) · Model years: 1992

THE TIRE CERTIFICATION LABELS INCORRECTLY IDENTIFY THE VEHICLE TIRE REQUIREMENTS AS P235/75R15 SL (STANDARD LOAD), RATHER THAN AS P235/75R15 XL (EXTRA LOAD).

Consequence: THE CERTIFICATION LABELS ON THE AFFECTED VEHICLES DO NOTCOMPLY WITH FMVSS 120, "TIRE SELECTION AND RIMS FOR MOTOR VEHICLES OTHER THANPASSENGER CARS." INCORRECT TIRE SELECTION COULD RESULT IN SUDDEN FAILURE OFA TIRE WHILE THE VEHICLE IS IN MOTION, AND RESULT IN A VEHICLE ACCIDENT.

Remedy: CORRECT TIRE INFORMATION LABELS AND INSTALLATION INSTRUCTIONS WILL BE MAILED TO THE OWNERS OF THESE VEHICLES. OWNERS WILL BE INSTRUCTED THAT DEALERS CAN INSTALL THE LABEL PROVIDED IF THEY PREFER.

Reported: 1993-06-08 (June 8, 1993) · Model years: 1992, 1993

THE FUEL FILLER HOSE OR FUEL FILLER VENT HOSE WAS DAMAGED BY A DRILL BIT USED TO INSTALL THE DSO PACKAGE ATTACHING HARDWARE ONTO THE FLOOR PAN.

Consequence: IF EITHER OF THE HOSES WAS PENETRATED BY THE DRILL BIT,FUEL LEAKAGE COULD RESULT, PARTICULARLY DURING FUELING OF THE VEHICLE. IN THEPRESENCE OF AN IGNITION SOURCE, THIS COULD RESULT IN FIRE.

Remedy: REPLACE THE FUEL FILLER AND VENT HOSES AND RELOCATE THE MOUNTING HARDWARE IN THE FLOOR PAN.

Reported: 1994-07-11 (July 11, 1994) · Model years: 1993, 1994

THE TRANSFORMER USED TO POWER THE NEON CENTER LIGHTBEAM CAN OVERHEAT AND CATCH ON FIRE.

Consequence: THE OVERHEATING AND FIRES CAUSED BY THE NEON TRANSFORMER CAN RESULT IN DAMAGE TO THE LIGHTBEAM ASSEMBLY, THE ROOF OF THE VEHICLE, AND COULD RESULT IN A VEHICLE FIRE.

Remedy: MARK III DEALERS WILL MODIFY THE ASSEMBLIES TO ELIMINATE THE NEON LIGHTING FIXTURE IN THE VEHICLE AND REPLACE IT WITH INCANDESCENT LIGHTS OPERATING DIRECTLY FROM THE VEHICLE 12-VOLT BATTERY.

Reported: 2006-08-01 (August 1, 2006) · Model years: 1994, 1995, 1996

ON CERTAIN TRUCKS EQUIPPED WITH SPEED CONTROL, GASOLINE OR NATURAL GAS ENGINES, THE SPEED CONTROL DEACTIVATION SWITCH MAY OVERHEAT.

Consequence: OVERHEATING COULD RESULT IN SMOKE OR BURN AND AN UNDERHOOD FIRE.

Remedy: DEALERS WILL INSTALL A FUSED WIRING HARNESS INTO THE SPEED CONTROL SYSTEM FREE OF CHARGE. THE RECALL BEGAN ON AUGUST 7, 2006. OWNERS MAY CONTACT FORD AT 1-866-436-7332. (NOTE: ALSO SEE RECALLS 05V017 AND 05V388)

Reported: 1993-11-23 (November 23, 1993) · Model years: 1994

THESE VEHICLES DO NOT COMPLY WITH FMVSS 105, "HYDRAULIC BRAKE SYSTEMS." THE PARKING BRAKE APPLICATION FORCE FOR A FOOT OPERATED CONTROL SYSTEM SHOULD NOT EXCEED 125 POUNDS TO HOLD THE VEHICLE ON A 30% GRADE. INTERFERENCE BETWEEN THE PARKING BRAKE PEDAL AND A WIRE HARNESS MAY INCREASE THE NEEDED PEDAL FORCE TO GREATER THAN 125 POUNDS TO SET THE PARKING BRAKE TO HOLD THE VEHICLE ON THE 30% GRADE.

Consequence: THE INTERFERENCE BETWEEN THE FOOT PEDAL AND THE WIREHARNESS MAY NOT ALLOW THE PARKING BRAKE TO FULLY SET. IF THIS OCCURS WHEN THEVEHICLE IS PARKED ON AN INCLINE, IT MAY ROLL, CAUSING A CRASH.

Remedy: FINAL STAGE MANUFACTURERS WILL BE INFORMED OF THIS CONDITION AND PROVIDED WITH PARTS AND INSTRUCTIONS NECESSARY TO CORRECT THIS SITUATION.

Reported: 1995-03-22 (March 22, 1995) · Model years: 1995

THE PARKING BRAKE FRONT CABLES WERE BUILT LONGER THAN APPROPRIATE THAT REDUCES THE PERFORMANCE OF THE PARKING BRAKE IN CERTAIN CIRCUMSTANCES, AND FAILS TO FULLY COMPLY WITH ALL THE REQUIREMENTS OF FMVSS NO. 105, "HYDRAULIC BRAKE SYSTEMS."

Consequence: CONSEQUENCE OF NON-COMPLIANCE: THE EFFECTIVENESS OF THE PARKING BRAKE SYSTEM ON A SEVERE GRADE MAY BE DIMINISHED.

Remedy: DEALERS WILL REPAIR THE PARKING BRAKE SYSTEM ON THE AFFECTED VEHICLES.

Reported: 1998-03-19 (March 19, 1998) · Model years: 1995

VEHICLE DESCRIPTION: LIGHT DUTY PASSENGER VANS AND STRIPPED CHASSIS. THERE IS INTERFERENCE BETWEEN THE PARKING BRAKE CABLE AND THE FUEL LINE WHICH, OVER TIME, CAN RESULT IN DAMAGE TO THE FUEL LINE CAUSING FUEL LEAKAGE.

Consequence: IF THERE IS FUEL LEAKAGE IN THE PRESENCE OF AN IGNITION SOURCE, FIRE COULD RESULT.

Remedy: DEALERS WILL REPLACE THE FUEL SUPPLY LINE. IN ADDITION, A PIECE OF ANTI-ABRASION INSULATION WILL BE INSTALLED TO PREVENT ABRASION OF THE FUEL LINE.

Reported: 1996-10-28 (October 28, 1996) · Model years: 1996

THE PARKING BRAKE SYSTEMS MAY NOT HOLD THE VEHICLES ON A 20% GRADE WITH FOOT PEDAL EFFORTS OF 125 POUNDS OR LESS. THIS DOES NOT MEET THE REQUIREMENTS OF FMVSS NO. 105, "HYDRAULIC BRAKE SYSTEMS."

Consequence: THE VEHICLE MAY ROLL AFTER BEING PARKED INCREASING THE RISK OF A VEHICLE ACCIDENT.

Remedy: DEALERS WILL ADJUST THE PARKING BRAKE SYSTEM ON THE AFFECTED VEHICLES.

Reported: 1996-10-02 (October 2, 1996) · Model years: 1997

THE BATTERY CABLE HARNESS DOES NOT HAVE ADEQUATE PROTECTION FROM CONTACTING AND BEING DAMAGED BY THE RIGHT ENGINE MOUNT.

Consequence: IF THE BATTERY CABLE OR STARTER WIRE INSULATION IS DAMAGED BY SUCH CONTACT, A SHORT TO GROUND CAN OCCUR RESULTING IN OVERHEATING OF THE WIRING AND POSSIBLE IGNITION OF SURROUNDING COMPONENTS.

Remedy: DEALERS WILL INSPECT FOR CHAFING OF THE CABLE AND WILL ADD INSULATION AND A TIE STRAP TO THE BATTERY CABLE HARNESS.

Reported: 2000-09-21 (September 21, 2000) · Model years: 1998, 1999, 2000

VEHICLE DESCRIPTION: BI-FUEL CNG PICKUP TRUCKS AND BI-FUEL CNG VANS, MODIFIED BY CFI CONTROL SYSTEMS, INC., FAIL TO CONFORM TO THE REQUIREMENTS OF FMVSS NO. 303, "FUEL SYSTEM INTEGRITY OF COMPRESSED NATURAL GAS VEHICLES." THE LABEL AFFIXED TO THE FUEL FILLER DOOR BY THE VEHICLE MODIFIER CONTAINS THE INSPECTION DATE AND EXPIRATION DATE OF THE CNG TANK. HOWEVER, IT DOES NOT CONTAIN THE STATEMENT "SEE INSTRUCTIONS ON THE FUEL CONTAINER FOR INSPECTION AND SERVICE LIFE."

Consequence: THESE VEHICLES DO NOT COMPLY WITH THE REQUIREMENTS.

Remedy: OWNERS WILL BE PROVIDED A LABEL WITH THE REQUIRED STATEMENT, ALONG WITH INSTRUCTIONS FOR AFFIXING THE LABEL AT THE FUEL FILLER DOOR. OWNER NOTIFICATION BEGAN NOVEMBER 2, 2000. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT FORD AT 1-800-392-3673.

Reported: 2000-04-19 (April 19, 2000) · Model years: 1999, 2000

VEHICLE DESCRIPTION: CUTAWAYS AND STRIPPED CHASSIS WITH SINGLE REAR WHEELS. THE LUG NUTS CAN POTENTIALLY BOTTOM OUT ON A SHOULDER ON THE STUDS.

Consequence: IF THIS OCCURS, THERE CAN BE AN INADEQUATE CLAMP LOAD TO ATTACH THE WHEEL TO THE AXLE, RESULTING IN NOISE, DAMAGE TO THE WHEEL AND HUB, OR IN EXTREME CASES, LOSS OF A REAR WHEEL WHILE THE VEHICLE IS BEING DRIVEN.

Remedy: DEALERS WILL REPLACE THE REAR WHEEL ATTACHING STUDS.

Reported: 1998-10-14 (October 14, 1998) · Model years: 1999

VEHICLE DESCRIPTION: PICKUP TRUCKS BUILT WITH SINGLE REAR WHEELS AND EQUIPPED WITH 3.55:1 AND 3.73:1 AXLE RATIO. THESE VEHICLES WERE BUILT WITH INCORRECT SPEEDOMETER DRIVEN GEARS, RESULTING IN A LOWER SPEEDOMETER READING THAN THE ACTUAL VEHICLE SPEED BEING DRIVEN.

Consequence: THIS CAN RESULT IN THE VEHICLE BEING DRIVEN AT AN UNSAFE OR ILLEGAL SPEED SHOULD THE DRIVER NOT REALIZE THAT HIS VEHICLE ROAD SPEED IS GREATER THAN THE SPEEDOMETER INDICATION.

Remedy: DEALERS WILL INSTALL THE CORRECT SPEEDOMETER GEAR.

Reported: 1999-03-15 (March 15, 1999) · Model years: 1999

VEHICLE DESCRIPTION: UTILITY VANS EQUIPPED WITH THE "60/40" HINGED SIDE CARGO DOORS. THE STRIKERS FOR THE 60/40 DOOR SINGLE LATCH SYSTEM WERE FOUND TO CONTAIN STRESS CRACKS AT THE STRIKER WIRE LOWER STAKE JOINT. STRIKERS WITH STRESS CRACKS MAY NOT MEET THE REQUIREMENTS OF FMVSS NO. 206, "DOOR LOCKS AND DOOR RETENTION COMPONENTS."

Consequence: IN THE EVENT OF A CRASH, THE DOOR STRIKERS MAY NOT HOLD THE DOOR, INCREASING THE RISK OF PERSONAL INJURY OR PROPERTY DAMAGE.

Remedy: DEALERS WILL REPLACE THE DOOR STRIKER.

Reported: 2000-10-04 (October 4, 2000) · Model years: 2001

VEHICLE DESCRIPTION: CERTAIN CREW VANS FAILED TO COMPLY WITH THE REQUIREMENTS OF FMVSS 225, "CHILD RESTRAINT ANCHORAGE SYSTEMS." THESE VEHICLES, WHICH ARE DESIGNATED AS TRUCKS, ARE 5 PASSENGER VEHICLES WITH THREE DESIGNATED SEATING POSITIONS IN THE SECOND ROW SEATS. THEY WERE BUILT WITHOUT CHILD SEAT TETHER ANCHORAGE BRACKETS IN THE CENTER POSITION OF THE SECOND ROW SEAT. ALSO THE OWNER GUIDES DO NOT ADDRESS THE CHILD SEAT TETHER ANCHORAGES IN THE CENTER SECOND ROW SEAT POSITION.

Consequence: IN THE EVENT OF A CRASH, THE CHILD SEAT MAY NOT BE PROPERLY ATTACHED INCREASING THE RISK OF INJURY TO THE CHILD.

Remedy: DEALERS WILL INSTALL THE CHILD SEAT TETHER ANCHORAGES AT THE CENTER SECOND ROW SEATING POSITION, AND ALSO REPLACE THE VEHICLE OWNER GUIDES WITH NEW VERSIONS PROVIDING THE REQUIRED WRITTEN INSTRUCTIONS. ELEVEN VEHICLES ARE AT DEALERSHIPS AND ASSEMBLY PLANT PERSONNEL WILL REPAIR THESE UNITS AT THE AFFECTED DEALERSHIPS. ARRANGEMENTS HAVE BEEN MADE FOR THE RETURN OF THE ONE UNIT THAT HAD BEEN SOLD. NO OTHER OWNER NOTIFICATION WILL BE REQUIRED.

Reported: 2003-08-05 (August 5, 2003) · Model years: 2001, 2002, 2003

ON CERTAIN CUTAWAY CHASSIS CAB WITH THE SCHOOL BUS OPTION, TWO BRACKETS AND TWO OUTRIGGER MEMBERS ARE MISSING IN THE AREA OF THE FUEL TANK.

Consequence: THE BRACKETS AND OUTRIGGER MEMBERS ARE INTENDED TO ENHANCE CRASH PERFORMANCE.

Remedy: FORD WILL SEND TECHNICIANS TO THE OWNER'S LOCATION TO INSPECT AND ADD THE BRACKETS AND OUTRIGGERS AS REQUIRED. OWNER NOTIFICATION BEGAN ON SEPTEMBER 3, 2003. OWNERS SHOULD CONTACT FORD AT 1-800-392-3673.

Reported: 2008-12-15 (December 15, 2008) · Model years: 2005, 2006, 2007

SUNSET VANS IS RECALLING 267 MY 2005-2007 ECONOLINE, G SERIES AND SPRINTER TRUCKS BUILT ON DODGE, FORD AND CHEVROLET CHASSIS AND EQUIPPED WITH RICON PLATFORM STYLE WHEELCHAIR LIFTS. THESE VEHICLES FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 404, "PLATFORM LIFT INSTALLATIONS IN MOTOR VEHICLES." THE THRESHOLD WARNING SYSTEM MAY NOT DETECT THE PRESENCE OF A WHEELCHAIR OR MOBILITY AID USER IN A CERTAIN SPOT WITHIN THE DEFINED THRESHOLD AREA.

Consequence: THE USER OF THE LIFT COULD BE INJURED SHOULD THE LIFT MOVE UNINTENTIONALLY.

Remedy: SUNSET VANS IS WORKING WITH RICON TO CORRECT THE WHEELCHAIR LIFTS FREE OF CHARGE (PLEASE SEE 07E095). OWNERS MAY CONTACT RICON AT 1-818-267-3000 OR SUNSET VANS AT 1-888-280-8267.

Reported: 2008-12-16 (December 16, 2008) · Model years: 2005, 2006, 2007

SUNSET VANS IS RECALLING 169 MY 2005-2007 ECONOLINE, G SERIES AND SPRINTER TRUCKS BUILT ON DODGE, FORD AND CHEVROLET CHASSIS AND EQUIPPED WITH RICON PLATFORM STYLE WHEELCHAIR LIFTS. THESE LIFTS FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 403, "PLATFORM LIFT SYSTEM ACCESSIBLE FOR MOTOR VEHICLES." THE ANTI-STOW INTERLOCK MAY NOT DETECT THE PRESENCE OF A WHEELCHAIR OR MOBILITY AID USER. THE PRESSURE SENSING SWITCH THAT DETECTS THE PRESENCE OF WEIGHT ON THE PLATFORM WAS NOT ADJUSTED TO THE NECESSARY SENSITIVITY LEVEL. THE LIFT COULD STOW EVEN THOUGH SOMEONE OR SOMETHING IS STILL ON THE LIFT.

Consequence: A LIFT OCCUPANT CAN BE INJURED SHOULD THE LIFT BEGIN TO STOW UNINTENTIONALLY.

Remedy: SUNSET VANS IS WORKING WITH RICON TO CORRECT THE WHEELCHAIR LIFTS FREE OF CHARGE (PLEASE SEE 07E097). OWNERS MAY CONTACT RICON AT 1-818-267-3000 OR SUNSET VANS AT 1-888-280-8267.

Reported: 2019-06-10 (June 10, 2019) · Model years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016

Ford Motor Company (Ford) is recalling certain 2009-2016 Ford Econoline vehicles equipped with a 5R110W transmission, 5.4L engine, and a school bus or ambulance preparation package. A weld within the coast clutch may fail, causing an unexpected loss of drive power.

Consequence: A sudden loss of drive power increases the risk of a crash. Transferring occupants of a disabled school bus or ambulance to another vehicle increases their risk of injury.

Remedy: Ford will notify owners, and dealers will replace the single-engaging coast one-way clutch with a new dual-engaging one-way clutch, free of charge. The recall began August 19, 2019. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 19S20.

Reported: 2025-09-03 (September 3, 2025) · Model years: 2017, 2018, 2019

Ford Motor Company (Ford) is recalling certain 2015-2019 Lincoln MKC, Mustang, F-350 SD, F-250 SD, F-450 SD, 2015-2017 Lincoln Navigator, Expedition, 2015-2018 Edge, Transit Connect, 2016-2019 F-550 SD, Transit, 2017-2019 Econoline, and 2019 Ranger vehicles. The rearview camera may display a distorted, inverted, or blank image when the vehicle is in reverse.

Consequence: A rearview camera that displays an inverted, distorted, or blank image can reduce the driver’s view behind the vehicle, increasing the risk of a crash.

Remedy: Dealers will inspect and replace the rearview camera as necessary, free of charge. Owner notification letters were mailed January 13, 2026. Ford owners will receive letters in phases, beginning January 2026 and June 2026. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25S89. This recall expands previous NHTSA recall number 25V270. Vehicle Identification Numbers (VINs) involved in this recall will be searchable on NHTSA.gov beginning September 8, 2025.

Reported: 2019-06-11 (June 11, 2019) · Model years: 2018, 2019

Unicell Body Company Inc. (Unicell) is recalling certain 2017-2019 Chevrolet Express and GMC Savanna, 2018-2019 Hino 155, Ford Econoline and Transit and Isuzu NPR, and 2018 Ram ProMaster-based vehicles equipped with ASA Electronics Voyager monitors used to display the back-up camera image. The affected monitors may revert back to the factory default settings which may cause the camera image to be reversed.

Consequence: The driver may inadvertently turn the wrong direction to avoid an object behind the vehicle, increasing the risk of a crash.

Remedy: Unicell will work with ASA Electronics to notify owners and offer a remedy, free of charge. The recall began May 9, 2019. Owners may contact ASA Electronics customer service 1-800-384-4400 or Unicell at 1-716-853-8628.

Reported: 2025-10-24 (October 24, 2025) · Model years: 2026

Ford Motor Company (Ford) is recalling certain 2026 Econoline vehicles. The heating, ventilation and air-conditioning (HVAC) system blower motor may fail, which can cause the defrosting and defogging system to become inoperative.

Consequence: An inoperative windshield defrosting and defogging system may decrease the driver's visibility, increasing the risk of a crash.

Remedy: Dealers will replace the HVAC blower motor assembly, free of charge. Owner notification letters were mailed January 30, 2026. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25SB4. Vehicle Identification Numbers (VINs) involved in this recall became searchable on NHTSA.gov beginning October 28, 2025.