2016 Imt DOMINATOR: complaints, problems and recalls
Explore the records behind recurring owner reports.
Key facts
0 owner complaints analyzed
2 distinct recall campaigns
Not available median reported failure mileage
Scope: 2016 model year. Data snapshot: . 0 complaints include usable failure mileage.
Most common problems
No owner complaints are recorded for this selection. A complaint can name multiple components.
Component breakdown
Number of unique complaints naming each component. Top eight shown.
No usable records for this chart.
| Category | Count |
|---|
No records.
Reported problems by failure mileage
Complaint counts in mileage bands. These are not failure rates per vehicle or mile.
| Category | Count |
|---|---|
| Under 25,000 | 0 |
| 25,000 to 49,999 | 0 |
| 50,000 to 74,999 | 0 |
| 75,000 to 99,999 | 0 |
| 100,000 to 149,999 | 0 |
| 150,000 and above | 0 |
Under 25,000: 0; 25,000 to 49,999: 0; 50,000 to 74,999: 0; 75,000 to 99,999: 0; 100,000 to 149,999: 0; 150,000 and above: 0
No usable failure mileage is recorded. 0 complaints have missing, zero or invalid mileage.
Complaints over time
Year the complaint was filed, not the vehicle model year or incident year. The snapshot year is partial.
No usable records for this chart.
| Category | Count |
|---|
No records.
Pattern summary
There is not enough complaint evidence to summarize patterns.
Calculated from recorded counts. An AI narrative has not been published for this selection.
Examples from the source records
Examples provide context, not a representative sample or a verified diagnosis.
Recall history
2 distinct campaigns affect this selection. Announcement dates below are different from vehicle model years. A campaign may cover multiple years.
16V088000 · Equipment
Reported: 2016-02-16 (February 16, 2016)
Iowa Mold Tooling Co., Inc. (IMT) is recalling certain model year 2013-2016 Dominator-Propane, Dominator I, Dominator II, Dominator III, and Dominator IV vehicles manufactured April 4, 2013, to January 22, 2016. The affected vehicles are fitted with IMT Series III cranes, models 6000, 7500, 8600, 9500, 10000, 12000, and 14000, which have a valve bank cover that may crack and fall from the crane while the vehicle is being driven.
Consequence: If the valve bank cover detaches from the crane it could be a road hazard, increasing the risk of a crash.
Remedy: IMT will notify owners, and dealers will replace the valve bank cover with a thicker one, free of charge. The recall began on April 6, 2016. Owners may contact IMT customer service at 1-800-247-5958. IMT's number for this recall is TB2016002.
NHTSA campaign record ↗17V515000 · Electrical System
Reported: 2017-08-18 (August 18, 2017)
Iowa Mold Tooling Co., Inc. (IMT) is recalling certain 2016-2017 Dominator Contractor series trucks built on 2017 Ford Super Duty chassis. These vehicles are equipped with a front jump start plug kit installed under the hood at the chassis battery. The fuse block for this kit may contact the hood creating an electrical short.
Consequence: An electrical short can increase the risk of a fire.
Remedy: IMT will notify owners, and dealers will replace the jump start kit mounting bracket, thereby relocating the fuse block, free of charge. The recall began on September 29, 2017. Owners may contact IMT customer service at 1-800-247-5958. IMT's number for this recall is TB2017006.
NHTSA campaign record ↗