1974 Ford L800: complaints, problems and recalls
Explore the records behind recurring owner reports.
Key facts
0 owner complaints analyzed
3 distinct recall campaigns
Not available median reported failure mileage
Scope: 1974 model year. Data snapshot: . 0 complaints include usable failure mileage.
Most common problems
No owner complaints are recorded for this selection. A complaint can name multiple components.
Component breakdown
Number of unique complaints naming each component. Top eight shown.
No usable records for this chart.
| Category | Count |
|---|
No records.
Reported problems by failure mileage
Complaint counts in mileage bands. These are not failure rates per vehicle or mile.
| Category | Count |
|---|---|
| Under 25,000 | 0 |
| 25,000 to 49,999 | 0 |
| 50,000 to 74,999 | 0 |
| 75,000 to 99,999 | 0 |
| 100,000 to 149,999 | 0 |
| 150,000 and above | 0 |
Under 25,000: 0; 25,000 to 49,999: 0; 50,000 to 74,999: 0; 75,000 to 99,999: 0; 100,000 to 149,999: 0; 150,000 and above: 0
No usable failure mileage is recorded. 0 complaints have missing, zero or invalid mileage.
Complaints over time
Year the complaint was filed, not the vehicle model year or incident year. The snapshot year is partial.
No usable records for this chart.
| Category | Count |
|---|
No records.
Pattern summary
There is not enough complaint evidence to summarize patterns.
Calculated from recorded counts. An AI narrative has not been published for this selection.
Examples from the source records
Examples provide context, not a representative sample or a verified diagnosis.
Recall history
3 distinct campaigns affect this selection. Announcement dates below are different from vehicle model years. A campaign may cover multiple years.
75V072000 · Power Train:Automatic Transmission
Reported: 1975-05-05 (May 5, 1975)
NHTSA campaign record ↗77V191000 · Seat Belts:Front:Anchorage
Reported: 1977-10-25 (October 25, 1977)
THE SEAT BELTS ON THE INVOLVED VEHICLES FAIL TO CONFORM TO FEDERAL MOTOR VEHICLE SAFETY STANDARD NOS. 208, "OCCUPANT CRASH PROTECTION", AND 209, "SEAT BELT ASSEMBLIES". THE NON-CONFORMITY EXISTS BECAUSE WHEN THE DRIVER"S SEAT IS ADJUSTED TO THE FULL FORWARD POSITION, THE SEAT CUSHION IS ADJUSTED TO MAXIMUM ELEVATION, AND THE SEAT BACK IS TILTED TO THE FULLY UPRIGHT POSITION, THE SEAT BELTS ARE NOT LONG ENOUGH TO ACCOMMODATE SOME DRIVERS.
Remedy: DEALER WILL REPLACE ANY SEAT BELT ASSEMBLY THAT IS DETERMINED TO BE INSUFFICIENT, WITHOUT CHARGE TO OWNER.
NHTSA campaign record ↗78V153000 · Engine And Engine Cooling:Cooling System:Fan
Reported: 1978-07-03 (July 3, 1978)
THE ENGINE COOLING FAN BLADES MAY CRACK AND CHIP DUE TO HIGH STRESSES CAUSED BY VIBRATIONS. THE CHIPPED PIECES OF THE BLADE COULD FLY INTO THE UNDERHOOD COMPONENTS. ALSO, THESE PIECES COULD FLY OUT FROM THE VEHICLE IF THE HOOD IS OPEN AND THE ENGINE IS RUNNING.
Remedy: THE DEALER WILL REPLACE THE EXISTING FAN BLADE ASSEMBLY WITH ONE OF ANOTHER DESIGN AT NO COST TO OWNER.
NHTSA campaign record ↗