1988 Cadillac BROUGHAM: complaints, problems and recalls
Explore the records behind recurring owner reports.
Key facts
0 owner complaints analyzed
9 distinct recall campaigns
Not available median reported failure mileage
Scope: 1988 model year. Data snapshot: . 0 complaints include usable failure mileage.
Most common problems
No owner complaints are recorded for this selection. A complaint can name multiple components.
Component breakdown
Number of unique complaints naming each component. Top eight shown.
No usable records for this chart.
| Category | Count |
|---|
No records.
Reported problems by failure mileage
Complaint counts in mileage bands. These are not failure rates per vehicle or mile.
| Category | Count |
|---|---|
| Under 25,000 | 0 |
| 25,000 to 49,999 | 0 |
| 50,000 to 74,999 | 0 |
| 75,000 to 99,999 | 0 |
| 100,000 to 149,999 | 0 |
| 150,000 and above | 0 |
Under 25,000: 0; 25,000 to 49,999: 0; 50,000 to 74,999: 0; 75,000 to 99,999: 0; 100,000 to 149,999: 0; 150,000 and above: 0
No usable failure mileage is recorded. 0 complaints have missing, zero or invalid mileage.
Complaints over time
Year the complaint was filed, not the vehicle model year or incident year. The snapshot year is partial.
No usable records for this chart.
| Category | Count |
|---|
No records.
Pattern summary
There is not enough complaint evidence to summarize patterns.
Calculated from recorded counts. An AI narrative has not been published for this selection.
Examples from the source records
Examples provide context, not a representative sample or a verified diagnosis.
Recall history
9 distinct campaigns affect this selection. Announcement dates below are different from vehicle model years. A campaign may cover multiple years.
87V185000 · Seat Belts:Front:Retractor
Reported: 1987-12-04 (December 4, 1987)
REAR SEAT BELT SHOULDER RETRACTOR ASSEMBLY MAY NOT LOCK WHEN SUBJECTED TO THE ACCELERATION REQUIRED BY FMVSS NO. 209.
Consequence: THIS INCREASES LIKELIHOOD OF INJURY TO SEAT OCCUPANT.VEHICLES DO NOT COMPLY WITH FMVSS NO. 209.
Remedy: REPLACE REAR SEAT SHOULDER BELT RETRACTOR ASSEMBLY, AS NECESSARY.
NHTSA campaign record ↗89V102000 · Vehicle Speed Control
Reported: 1989-06-16 (June 16, 1989)
A SMALL NYLON BUSHING IN THE CRUISE CONTROL SERVO BAIL MAY SLIP OUT OF PLACE, CAUSING INTERMITTENT AND UNEXPECTED INCREASES IN ENGINE SPEED OR DIESELING (ENGINE RUN ON WITH IGNITION OFF).
Consequence: SERVO ROD ASSEMBLY COULD CATCH ON ENGINE COMPONENTS ANDRESULT IN A STUCK THROTTLE WITH POTENTIAL FOR A VEHICLE CRASH.
Remedy: INSTALL A NEW BUSHING IN CRUISE CONTROL SERVO BAIL.
NHTSA campaign record ↗91V011000 · Service Brakes, Hydraulic:Foundation Components:Drum
Reported: 1991-01-11 (January 11, 1991)
LIMOUSINE FAILED TO MEET STOPPING DISTANCE REQUIREMENTS OF FMVSS 105.
Consequence: INCREASED STOPPING DISTANCE COULD RESULT IN AN ACCIDENT;VEHICLES DO NOT COMPLY WITH FMVSS 105.
Remedy: REPLACE ORIGINAL REAR WHEEL BRAKE CYLINDER WITH A LARGER CYLINDER.
NHTSA campaign record ↗91V093000 · Service Brakes, Hydraulic:Foundation Components:Drum:Wheel Cylinders
Reported: 1991-06-14 (June 14, 1991)
REAR WHEEL BRAKE CYLINDERS ARE TOO SMALL TO ALLOW FOR PROPER BRAKING.
Consequence: STOPPING DISTANCE REQUIREMENTS OF FMVSS 105 ARE NOT METWITH POWER ASSIST BRAKING UNITS INOPERATIVE.
Remedy: REPLACE ORIGINAL 1" REAR WHEEL BRAKE CYLINDER WITH A 1 1/16" CYLINDER.
NHTSA campaign record ↗91V094000 · Service Brakes, Hydraulic:Foundation Components:Drum:Wheel Cylinders
Reported: 1991-06-14 (June 14, 1991)
REAR WHEEL BRAKE CYLINDERS ARE TOO SMALL TO ALLOW FOR PROPER BRAKING.
Consequence: STOPPING DISTANCE REQUIREMENTS OF FMVSS 105 WERE NOT METWITH POWER BRAKING ASSIST UNIT INOPERATIVE.
Remedy: REPLACE ORIGINAL 1" REAR WHEEL BRAKE CYLINDER WITH A 1 1/16" CYLINDER.
NHTSA campaign record ↗91V096000 · Service Brakes, Hydraulic:Foundation Components:Drum:Wheel Cylinders
Reported: 1991-06-14 (June 14, 1991)
REAR WHEEL BRAKE CYLINDERS ARE TOO SMALL TO ALLOW FOR PROPER BRAKING.
Consequence: STOPPING DISTANCE REQUIREMENTS OF FMVSS 105 ARE NOT METWITH POWER BRAKING ASSIST UNIT INOPERATIVE.
Remedy: REPLACE ORIGINAL 1" REAR WHEEL BRAKE CYLINDER WITH A 1 1/16" CYLINDER.
NHTSA campaign record ↗91V100000 · Service Brakes, Hydraulic:Foundation Components:Drum:Wheel Cylinders
Reported: 1991-06-14 (June 14, 1991)
Consequence: STOPPING DISTANCE REQUIREMENTS OF FMVSS 105 ARE NOT METWITH POWER BRAKING ASSIST UNIT INOPERATIVE.
Remedy: REPLACE ORIGINAL 1" REAR WHEEL BRAKE CYLINDER WITH A 1 1/16" CYLINDER.
NHTSA campaign record ↗91V101000 · Service Brakes, Hydraulic:Foundation Components:Drum:Wheel Cylinders
Reported: 1991-06-14 (June 14, 1991)
Consequence: STOPPING DISTANCE REQUIREMENTS OF FMVSS 105 ARE NOT METWITH POWER BRAKING ASSIST UNIT INOPERATIVE.
Remedy: REPLACE ORIGINAL 1" REAR WHEEL BRAKE CYLINDER WITH A 1 1/16" CYLINDER.
NHTSA campaign record ↗92V152000 · Service Brakes, Hydraulic:Foundation Components:Drum:Wheel Cylinders
Reported: 1992-10-20 (October 20, 1992)
THE INCREASED WEIGHT OF THE STRETCH CONVERSION LIMOUSINES REQUIRES LARGER DIAMETER REAR WHEEL BRAKE CYLINDERS THAN THOSE INSTALLED IN THE FACTORY.
Consequence: THE VEHICLES DO NOT MEET THE STOPPING DISTANCEREQUIREMENTS OF FMVSS 105, "HYDRAULIC BRAKE SYSTEMS".
Remedy: REPLACE THE EXISTING REAR WHEEL BRAKE CYLINDERS WITH LARGER DIAMETER BRAKE CYLINDERS.
NHTSA campaign record ↗