1979 Buick CENTURY: complaints, problems and recalls
Explore the records behind recurring owner reports.
Key facts
0 owner complaints analyzed
5 distinct recall campaigns
Not available median reported failure mileage
Scope: 1979 model year. Data snapshot: . 0 complaints include usable failure mileage.
Most common problems
No owner complaints are recorded for this selection. A complaint can name multiple components.
Component breakdown
Number of unique complaints naming each component. Top eight shown.
No usable records for this chart.
| Category | Count |
|---|
No records.
Reported problems by failure mileage
Complaint counts in mileage bands. These are not failure rates per vehicle or mile.
| Category | Count |
|---|---|
| Under 25,000 | 0 |
| 25,000 to 49,999 | 0 |
| 50,000 to 74,999 | 0 |
| 75,000 to 99,999 | 0 |
| 100,000 to 149,999 | 0 |
| 150,000 and above | 0 |
Under 25,000: 0; 25,000 to 49,999: 0; 50,000 to 74,999: 0; 75,000 to 99,999: 0; 100,000 to 149,999: 0; 150,000 and above: 0
No usable failure mileage is recorded. 0 complaints have missing, zero or invalid mileage.
Complaints over time
Year the complaint was filed, not the vehicle model year or incident year. The snapshot year is partial.
No usable records for this chart.
| Category | Count |
|---|
No records.
Pattern summary
There is not enough complaint evidence to summarize patterns.
Calculated from recorded counts. An AI narrative has not been published for this selection.
Examples from the source records
Examples provide context, not a representative sample or a verified diagnosis.
Recall history
5 distinct campaigns affect this selection. Announcement dates below are different from vehicle model years. A campaign may cover multiple years.
79V142000 · Exterior Lighting:Brake Lights:Switch
Reported: 1979-06-06 (June 6, 1979)
ON THE INVOLVED VEHICLES THE BRAKE STOPLIGHT AND CRUISE CONTROL SWITCH WHICH IS OPERATED BY THE BRAKE PEDAL MAY HAVE BEEN ASSEMBLED WITH AN INCORRECT LUBRICANT ON THE ACTUATING PLUNGER. THIS CAN CAUSE THE REAR BRAKE STOPLIGHTS TO BECOME INOPERATIVE AND THE CRUISE CONTROL, IF ACTIVATED, TO STAY ELECTRICALLY ENGAGED.
Remedy: DEALER WILL INSPECT AND, IF NECESSARY, REPLACE THE BRAKE STOPLIGHT AND CRUISE CONTROL SWITCH AT NO COST TO OWNER.
NHTSA campaign record ↗79V214000 · Power Train:Automatic Transmission:Lever And Linkage:Floor Shift
Reported: 1979-09-18 (September 18, 1979)
THE SHIFT CABLE RETAINING CLIP MAY HAVE BEEN INSTALLED BACKWARDS OR NOT AT ALL. THE PURPOSE OF THIS SPRING CLIP IS TO SECURE THE LOWER END OF THE SHIFT CABLE HOUSING TO THE TRANSMISSION. IF THE CLIP IS BACKWARD OR MISSING, THE CONSOLE SHIFT LEVER MAY NOT SHIFT THE TRANSMISSION AND/OR THE TRANSMISSION RANGE INDICATOR MAY INDICATE THAT THE TRANSMISSION IS IN THE "PARK" OR "P" POSITION WHEN IT IS NOT.
Remedy: THE DEALER WILL INSPECT AND IF NECESSARY CORRECT THE SHIFT CABLE RETAINING CLIP INSTALLATION AT NO CHARGE.
NHTSA campaign record ↗81V022000 · Visibility:Glass, Side/Rear
Reported: 1981-02-11 (February 11, 1981)
THE ELECTRO-CLEAR REAR WINDOW DEFOGGERS CONTAIN A DEFECT WHICH CAUSES THE GLASS TO SHATTER WITHOUT IMPACT DURING OR SOME TIME AFTER USE OF THE DEFOGGER. VERTICAL ELECTRICAL STRIPS MAY DETERIORATE AND CAUSE HOT SPOTS THAT CAN RESULT IN BREAKAGE OF THE REAR GLASS.
Remedy: VEHICLES WILL BE INSPECTED FOR PRESENCE OF A PARTICULAR WEATHERSTRIP. IF PRESENT, A LAYER OF A SPECIAL CONDUCTIVE EPOXY WILL BE ADDED TO THE VERTICAL BAR ON THE REAR WINDOW GLASS. THIS EPOXY IS A NEW CONDUCTIVE MATERIAL WHICH WILL NOT REACT WITH THE WEATHERSTRIP.
NHTSA campaign record ↗81V025000 · Suspension:Rear
Reported: 1981-02-25 (February 25, 1981)
THE BOLTS THAT ATTACH THE LOWER REAR CONTROL ARM TO THE FRAME MAY FRACTURE. THE REAR CONTROL ARM SUPPORTS AND POSITIONS THE REAR AXLE. FRACTURE OF THE BOLTS WOULD ALLOW THE CONTROL ARM TO DROP FREE.
Remedy: BOTH REAR CONTROL ARM ATTACHMENT BOLTS WILL BE REPLACED WITHOUT CHARGE.
NHTSA campaign record ↗84V149000 · Power Train:Axle Assembly:Axle Shaft
Reported: 1984-11-24 (November 24, 1984)
REAR AXLE ASSEMBLY MAY HAVE AXLES THAT WERE IMPROPERLY MANUFACTURED. THIS CONDITION MAY RESULT IN SEPARATION OF THE AXLE SHAFT AND WHEEL ASSEMBLY FROM THE VEHICLE.
Remedy: THE DEALER WILL INSPECT THE REAR AXLE TO DETERMINE WHETHER IT WAS MANUFACTURED AT THE BUFFALO PLANT. IF SO, THEY WILL MAKE AXLE MEASUREMENTS AND IF NECESSARY REPLACE OR MODIFY AFFECTED AXLE COMPONENTS WITHOUT CHARGE.
NHTSA campaign record ↗