Ferrara INFERNO recalls by model year

Reported: 2006-04-28 (April 28, 2006) · Model years: 2003, 2004, 2005

ON CERTAIN FIRE TRUCKS EQUIPPED WITH CERTAIN NMB-MINEBEA KINGPIN BALLPIN SUSPENSION ASSEMBLIES, THE KINGPIN BALLPIN ASSEMBLY CAN FRACTURE POSSIBLY ALLOWING THE ASSOCIATED WHEEL TO DISENGAGE FROM PART OF THE SUSPENSION.

Consequence: WHEEL SEPARATION WHILE THE VEHICLE IS IN USE COULD LEAD TO A VEHICLE CRASH.

Remedy: FERRARA HAS REPLACED THE KING PINS ON ALL TWELVE FIRE TRUCKS. NO FURTHER ACTION IS NECESSARY.

Reported: 2018-03-14 (March 14, 2018) · Model years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012

Ferrara Fire Apparatus, Inc. (Ferrara) is recalling certain 2004-2012 Inferno and Igniter emergency vehicles, equipped with Timoney Independent Front Suspensions. Inconsistent machining may result in fatigue cracks developing over time in the front axle spindles, causing failure of the spindle and the possible separation of a front wheel from the vehicle.

Consequence: A wheel separation from the vehicle can increase the risk of a crash.

Remedy: Ferrara will notify owners, and dealers will replace the front axle spindle, free of charge. The recall began on April 27, 2018. Owners may contact Ferrara customer service at 1-800-443-9006.

Reported: 2009-06-10 (June 10, 2009) · Model years: 2008, 2009

FERRARA IS RECALLING 89 MODEL YEAR 2008-2009 INFERNO AND IGNITER FIRE TRUCKS EQUIPPED WITH CERTAIN HALDEX QUICK RELEASE VALVES (QRV). THE RUBBER DIAPHRAGM INSIDE THE QRV MAY EXPERIENCE DELAMINATION RESULTING IN SIGNIFICANT LEVELS OF AIR PRESSURE LEAKAGE PAST AND/OR THROUGH THE DIAPHRAGM, OR THE DEVELOPMENT OF A BUBBLE IN THE DIAPHRAGM WHICH MAY TRAP AIR PRESSURE IN THE VALVE AND NOT ALLOW THE SERVICE BRAKES TO RELEASE.

Consequence: MALFUNCTION OF THE AIR BRAKE SYSTEM COULD RESULT IN A VEHICLE CRASH.

Remedy: FERRARA WILL NOTIFY OWNERS AND REPAIR THE AFFECTED VEHICLE FREE OF CHARGE. THE RECALL BEGAN ON JUNE 26, 2009. OWNERS CAN CONTACT FERRARA AT 1-225-567-7100.

Reported: 2011-10-12 (October 12, 2011) · Model years: 2009, 2010, 2011

FERRARA IS RECALLING CERTAIN MODEL YEAR 2009-2011 INFERNO AND IGNITER VEHICLES EQUIPPED WITH MERITOR WABCO ELECTRONIC STABILITY CONTROL (ESC), MANUFACTURED FROM APRIL 2009, THROUGH OCTOBER 2011. THE ESC MODULE MAY CAUSE THE ESC SYSTEM TO ACTIVATE UNNECESSARILY WHEN THE VEHICLE IS DRIVEN IN A PARTICULAR MANNER ON CERTAIN UNIQUE ROAD CONDITIONS AND MAY ADVERSELY AFFECT THE SLIP ANGLE CALCULATION BY THE ESC MODULE.

Consequence: THIS MIGHT CAUSE THE ESC TO PERCEIVE AN OVER STEERING SITUATION AND THEREFORE APPLY THE FRONT AXLE OUTER WHEEL SERVICE BRAKE UNTIL THE VEHICLE IS PERCEIVED TO BE STABLE BY THE ESC. THESE CONDITIONS COULD INCREASE THE RISK OF A CRASH.

Remedy: FERRARA WILL NOTIFY OWNERS AND REPLACE THE CONTROL MODULE FREE OF CHARGE. THE SAFETY RECALL BEGAN ON OCTOBER 25, 2011. OWNERS MAY CONTACT FERRARA AT 1-225-567-7100.

Reported: 2016-07-20 (July 20, 2016) · Model years: 2011, 2012, 2013, 2014, 2015, 2016

Ferrara Fire Apparatus, Inc. (Ferrara) is recalling certain model year 2011-2016 Inferno, Igniter, Intruder, and Cinder emergency vehicles manufactured October 3, 2011, to May 31, 2016, equipped with Class 1 Ultraview Touchscreens manufactured by Hale Products. These touchscreens may experience false switch activations that can happen without the operator's knowledge causing accessories to turn on or off, affecting vehicle performance.

Consequence: The unintended turning on or off of accessories such as emergency beacons or automatic snow chains can increase the risk of a crash.

Remedy: Ferrara will notify owners, and service personnel or service centers will reprogram the units, free of charge. The recall began on August 26, 2016. Owners may contact Ferrara customer service at 1-225-567-7100 extension 3011.

Reported: 2015-09-04 (September 4, 2015) · Model years: 2013, 2014

Ferrara Fire Apparatus, Inc. (Ferrara) is recalling certain model year 2013-2014 Igniter and Inferno firetrucks manufactured October 16, 2013, to December 10, 2014. The affected vehicles are built with independent front suspensions that may have loose ball joints.

Consequence: A loose ball joint may separate from the steering linkage resulting in a loss of steering control and an increased risk of a crash.

Remedy: Ferrara will notify owners, and dealers will inspect the firetrucks and replace the affected suspension components, as necessary, free of charge. The recall is expected to begin in October 2015. Owners may contact Ferrara customer service at 1-225-567-7100 ext 3011.

Reported: 2016-06-16 (June 16, 2016) · Model years: 2015, 2016

Ferrara Fire Apparatus, Inc. (Ferrara) is recalling certain model year 2015-2016 Inferno, Igniter, Cinder, Ultra, and Intruder vehicles built on Freightliner and International chassis manufactured August 3, 2015, to April 29, 2016, equipped with pumps to provide pressurized water to aid in fighting fires. These pumps have 6" intake strainers that may have been improperly soldered during production and, as a result, the strainers may come apart during use, allowing parts of the strainer and debris to enter the pump, possibly damaging the pump.

Consequence: If the strainer and/or debris enters the pump, and the operator is forced to shut down the pump, reducing firefighting effectiveness, there could be an increased risk of injury.

Remedy: Ferrara will notify owners, and owners will check the strainer for missing solder at the joints. Any strainers missing solder will be replaced, free of charge. The recall began on July 20, 2016. Owners may contact Ferrara customer service at 1-800-443-9006 or hale customer service at 1-800-533-3569.

Reported: 2016-08-04 (August 4, 2016) · Model years: 2015, 2016

Ferrara Fire Apparatus, Inc. (Ferrara) is recalling certain model year 2015-2016 Inferno, Igniter, Intruder and Cinder fire trucks built on Freightliner and International chassis manufactured April 13, 2015, to May 30, 2016. The affected vehicles may be equipped with certain C20 and C21 split-shaft transmissions from Waterous. This transmission sends power to the wheels of an emergency response vehicle or powers an add-on unit such as a water pump used for fighting fires. A component within the shift unit may be damaged and as a result, the operator may not be able to switch the power output.

Consequence: If the power output cannot be changed, once the fire truck arrives at the scene, it may not be able to pump water to aid in extinguishing the fire, increasing the risk of injury.

Remedy: Ferrara will notify owners, and the shift unit assembly will be removed and the clevis pin and retaining rings will be replaced, free of charge. The recall began on September 9, 2016. Owners may contact Ferrara customer service at 1-225-567-7100 extension 3011.

Reported: 2018-02-05 (February 5, 2018) · Model years: 2015, 2016

Ferrara Fire Apparatus, Inc. (Ferrara) is recalling certain 2015-2016 Inferno and International 4400, 2013-2016 Igniter, 2014-2017 Cinder and Freightliner M2 106, 2013-2014 Ember and 2013-2017 Kenworth T370 fire-fighting vehicles, equipped with Hale pressure relief valves in the water pumps used for fire fighting. Rings securing the valves may corrode over time after exposure to water, causing the ring to fail and the pressure relief valve to open, reducing the water pressure available for fire fighting.

Consequence: A reduction in water pressure may hinder fire fighting efforts, increasing the risk of injury.

Remedy: Ferrara will notify owners, and Ferrara certified dealers or technicians will replace the relief valve retaining ring with one that is stainless steel, free of charge. The recall began on February 12, 2018. Owners may contact Ferrara customer service at 1-800-443-9006.

Reported: 2019-09-24 (September 24, 2019) · Model years: 2015, 2016, 2017, 2018, 2019

Ferrara Fire Apparatus, Inc. (Ferrara) is recalling certain 2015-2019 Inferno fire trucks equipped with independent front suspensions manufactured by Reyco Granning. The front shocks may separate from their upper mount on the front suspension. The loose shock may contact and damage the steering gear housing, possibly causing a steering fluid leak and a loss of power steering assist.

Consequence: A loss of hydraulic steering assist can increase the risk of a crash.

Remedy: Ferrara will notify owners and will work with Reyco Granning to inspect and remedy the vehicles free of charge. Ferrara issued owners an interim notification on September 24, 2019. The recall began October 9, 2019. Owners may contact Ferrara customer service at 1-800-443-9006.

Reported: 2018-09-11 (September 11, 2018) · Model years: 2017, 2018, 2019

Ferrara Fire Apparatus, Inc. (Ferrara) is recalling certain 2017-2019 Ferrara Inferno, Igniter, Cinder, Ultra, and Intruder emergency vehicles equipped with Whelen accessory brake lights. Depending on the specific wiring of the vehicle, these brake lights may illuminate when the brake pedal has not been pressed. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 108, "Lamps, Reflective Devices, and Associated Equipment."

Consequence: If the brake lights incorrectly illuminate, it can confuse other drivers, possibly increasing the risk of a crash.

Remedy: Ferrara will notify owners, and dealers will replace the brake lights, free of charge. The recall began November 1, 2018. Owners may contact Ferrara customer service at 1-800-443-9006.

Reported: 2021-05-13 (May 13, 2021) · Model years: 2017, 2018, 2019, 2020

Ferrara Fire Apparatus, Inc. (Ferrara) is recalling certain 2017-2020 Inferno and Igniter vehicles. The sealing washer may not seat correctly in the pilot bore holes, allowing the high pressure fuel rail assembly to leak.

Consequence: A fuel leak in the presence of an ignition source increases the risk of a fire.

Remedy: Dealers will inspect the rail threads, and replace the rail as necessary, free of charge. Owner notification letters were mailed on June 7, 2021. Owners may contact Ferrara customer service at 1-800-443-9006.

Reported: 2023-12-06 (December 6, 2023) · Model years: 2018, 2019, 2020

Ferrara Fire apparatus, Inc. (Ferrara) is recalling certain 2018-2020 Inferno Aerial Fire Apparatus trucks. In the event of a short circuit or wiring failure, the firmware in the vehicle multiplex system may fail to shut off the output pin, resulting in overloaded electrical circuits.

Consequence: Overloaded electrical circuits can overheat, increasing the risk of fire.

Remedy: Ferrara will work with the equipment manufacturer to update the firmware, free of charge. Owner notification letters were mailed January 26, 2024. Owners may contact Ferrara customer service at 1-800-443-9006.

Reported: 2021-03-04 (March 4, 2021) · Model years: 2019, 2020

Ferrara Fire Apparatus, Inc. (Ferrara) is recalling certain 2019-2020 Inferno vehicles. The steering gear mounting bolts may become loose and back out, resulting in difficulty steering.

Consequence: Difficulty steering, or the inability to steer in both directions, can increase the risk of a crash.

Remedy: Ferrara will notify owners, and dealers will replace the steering gear mounting bolts and washers, free of charge. Owner notification letters were mailed on April 23, 2021. Owners may contact Ferrara customer service at 1-800-443-9006.

Reported: 2022-01-20 (January 20, 2022) · Model years: 2019, 2020, 2021, 2022

Ferrara Fire Apparatus, Inc. (Ferrara) is recalling certain 2019-2022 Inferno, Igniter, and Cinder emergency vehicles. The fuel tubes between the fuel rail and the injectors for cylinders four, five, and six may fatigue and crack, which can result in a high pressure fuel leak.

Consequence: A high pressure fuel leak in the presence of an ignition source can increase the risk of a fire.

Remedy: On engines with 75 miles or less, dealers will install vibration isolators to the fuel tubes. Engines with more than 75 miles will receive new fuel tubes with vibration isolators, free of charge. Owner notification letters are expected to be mailed January 31, 2022. Owners may contact Ferrara customer service at 1-800-443-9006.

Reported: 2021-11-19 (November 19, 2021) · Model years: 2021, 2022

Ferrara Fire Apparatus, Inc. (Ferrara) is recalling certain 2021-2022 Inferno and Cinder emergency vehicles. The rear axle drive pinion may fracture.

Consequence: A fractured drive pinion may contact the brake drop hose, and unintentionally engage the parking brake or activate the brake lights, increasing the risk of a crash.

Remedy: Meritor will inspect and replace the drive pinion, as necessary, free of charge. Owners notification letters were mailed on January 3, 2022. Owners may contact Ferrara customer service at 1-800-443-9006.

Reported: 2022-06-09 (June 9, 2022) · Model years: 2021, 2022, 2023

Ferrara Fire Apparatus, Inc. (Ferrara) is recalling certain 2021-2023 Inferno and Igniter vehicles. An additional resistor was incorrectly installed on the printed circuit board, which can disrupt CAN network communication and cause vehicle lighting to fail.

Consequence: Inoperable vehicle lighting can reduce visibility and increase the risk of a crash.

Remedy: Dealers will replace the modules, free of charge. Owner notification letters are expected to be mailed July 18, 2022. Owners may contact Ferrara customer service at 1-800-443-9006.

Reported: 2022-08-04 (August 4, 2022) · Model years: 2021, 2022

Ferrara Fire Apparatus, Inc. (Ferrara) is recalling certain 2021-2022 Inferno, Igniter, and Cinder fire trucks. The steering gears may have been assembled incorrectly, which can cause the gears to fracture.

Consequence: A fractured steering gear can cause a loss of steering control, increasing the risk of a crash.

Remedy: Dealers will inspect and replace the steering gears, as necessary, free of charge. Owner notification letters were mailed on September 1, 2022. Owners may contact Ferrara's customer service at 1-800-443-9006.

Reported: 2023-05-04 (May 4, 2023) · Model years: 2022

Ferrara Fire Apparatus, Inc. (Ferrara Fire) is recalling certain 2022 Ultra and Inferno fire trucks, equipped with a Warn Winch and a wireless handheld remote. Water may enter the handheld remote control for the winch and cause circuit board corrosion, which can allow the winch to operate unintentionally.

Consequence: A winch that operates unintentionally increases the risk of injury.

Remedy: Ferrara Fire will work with Warn Industries, Inc. to provide owners instructions on how to inspect the remote for corrosion and disable the wireless function by removing the battery pack from the remote. If corrosion or water intrusion is found when removing the battery pack, owners should stop using the remote and contact WARN customer service for a replacement remote, free of charge. All affected vehicles were repaired by June 25, 2023. Owners may contact Ferrara customer service at 1-800-443-9006.