Bmw M6 recalls by model year

Reported: 2012-03-26 (March 26, 2012) · Model years: 2007, 2008, 2009, 2010

BMW IS RECALLING CERTAIN MODEL YEAR 2004-2010 5-SERIES, MODEL YEAR 2004-2010 6-SERIES, MODEL YEAR 2006-2010 M5, AND MODEL YEAR 2007-2010 M6 VEHICLES. THE INSULATED BULKHEAD CONNECTOR FOR THE POSITIVE BATTERY CABLE MAY HAVE BEEN INCORRECTLY ATTACHED TO THE TRUNK FLOOR PANEL, WHICH CAN LEAD TO A LOOSENING OF THE BOLT CONNECTION. AS IT LOOSENS, AN INCREASE IN ELECTRICAL RESISTANCE AT THIS CABLE CONNECTION IS POSSIBLE AND COULD CAUSE THE CABLE CONNECTION TO OVERHEAT.

Consequence: OVERHEATING COULD LEAD TO A FIRE, EVEN WHILE THE VEHICLE IS NOT IN USE. AS A PRECAUTION, OWNERS ARE ADVISED TO PARK OUTSIDE UNTIL THE REMEDY HAS BEEN MADE.

Remedy: BMW WILL NOTIFY OWNERS, AND DEALERS WILL INSPECT AND SECURE THE BATTERY BOLT CABLE CONNECTION AS NECESSARY, FREE OF CHARGE. THE SAFETY RECALL BEGAN ON APRIL 30, 2012. OWNERS MAY CONTACT BMW CUSTOMER RELATIONS AND SERVICES AT 1-800-525-7417.

Reported: 2012-09-28 (September 28, 2012) · Model years: 2013

BMW is recalling certain model year 2013 M5, M6 Coupe, and M6 Convertible vehicles, manufactured from July 19, 2012, through September 11, 2012. Due to a manufacturing process error, the tolerance between the engine oil pump's drive shaft and the pump's rotor was not within specification. As a result, the pump's driveshaft could separate from the rotor.

Consequence: Separation of the pump's driveshaft from the rotor could lead to a sudden loss of oil pressure causing the possibility of complete engine failure, resulting in an engine stall-like condition, increasing the risk of a vehicle crash.

Remedy: BMW will notify owners, and dealers will replace the oil pump, free of charge. The safety recall began on November 30, 2012. Owners may contact BMW at 1-800-525-7417.

Reported: 2017-08-08 (August 8, 2017) · Model years: 2013

BMW of North America, LLC. (BMW) is recalling certain 2012-2013 BMW X3 xDrive28i, X3 xDrive35i, and M6 Convertible vehicles and 2013 M6 Coupe vehicles. The affected vehicles have a driver's frontal air bag inflator that may have been improperly welded.

Consequence: In the event of a crash necessitating deployment of the driver's frontal air bag, the inflator housing could separate from the base plate and result in metal striking the vehicle occupants, potentially resulting in serious injury or death.

Remedy: BMW will notify owners, and dealers will replace the driver's front air bag module, free of charge. The recall began October 6, 2017. Owners may contact BMW customer service at 1-800-525-7417.

Reported: 2020-02-19 (February 19, 2020) · Model years: 2014, 2015, 2016, 2017, 2018, 2019

BMW of North America, LLC (BMW) is recalling certain 2014-2019 M6 Gran Coupe vehicles. The third brake light may become loose, possibly allowing the light to detach from the vehicle.

Consequence: If the third brake light detaches from the vehicle, it would no longer provide the required lighting to following traffic, or it may become a road hazard, increasing the risk of a crash.

Remedy: BMW will notify owners, and dealers will inspect the third brake light and properly secure it with new fasteners. If the third brake light detached from the vehicle and is damaged, it will be replaced. All repairs will be performed free of charge. The recall began April 17, 2020. Owners may contact BMW customer service at 1-800-525-7417.

Reported: 2016-07-19 (July 19, 2016) · Model years: 2015

BMW of North America, LLC (BMW) is recalling certain model year 2015 BMW M5 sedans manufactured September 4, 2014, through December 4, 2014, 2015 M6 coupes manufactured September 3, 2014, through December 3, 2014, 2015 M6 convertibles manufactured September 8, 2014, through December 4, 2014, and 2015 M6 Gran Coupe vehicles manufactured September3, 2014, through December 4, 2014. The affected vehicles have a driveshaft that may have been inadequately welded during manufacturing.

Consequence: Due to the improper weld, the driveshaft may fracture and fail, causing loss of drive to the rear wheels and a loss of propulsion. Additionally, if the car is turned off and exited without the parking brake applied, the car may roll. Either condition increases the risk of a crash.

Remedy: BMW will notify owners, and dealers will inspect and replace the driveshaft, as necessary, free of charge. The recall is expected to begin during September 2016. Owners may contact BMW customer service at 1-800-525-7417.

Reported: 2016-12-20 (December 20, 2016) · Model years: 2017

BMW of North America, LLC (BMW) is recalling certain model year 2017 BMW 640i, 640i xDrive, 650i, 650i xDrive, M6, 535i, 535i xDrive, 430i, 430i xDrive, 440i, 440i xDrive, M4, X1 sDrive28i, X1 xDrive28i, i3, i8, Rolls-Royce Dawn, Mini Clubman Cooper, Clubman Cooper S, Cooper All4, Cooper S All4, Mini 4-Door Cooper, Cooper S, Mini 2-Door Cooper, Cooper S, John Cooper Works and 2016 BMW 528i, 528i xDrive, 535i, 535i xDrive, 550i, 550i xDrive, M5 and 535d vehicles. The affected vehicles have seat- mounted side air bag inflator initiators that may fail to ignite during a crash.

Consequence: If the air bag inflator initiator fails to ignite, the seat-mounted air bag will not deploy, increasing the risk of injury.

Remedy: BMW will notify owners, and dealers will replace the air bag modules, free of charge. The recall began February 6, 2017. Owners may contact BMW customer service at 1-800-525-7417.