2012 Vermeer R9X12T: complaints, problems and recalls
Explore the records behind recurring owner reports.
Key facts
0 owner complaints analyzed
5 distinct recall campaigns
Not available median reported failure mileage
Scope: 2012 model year. Data snapshot: . 0 complaints include usable failure mileage.
Most common problems
No owner complaints are recorded for this selection. A complaint can name multiple components.
Component breakdown
Number of unique complaints naming each component. Top eight shown.
No usable records for this chart.
| Category | Count |
|---|
No records.
Reported problems by failure mileage
Complaint counts in mileage bands. These are not failure rates per vehicle or mile.
| Category | Count |
|---|---|
| Under 25,000 | 0 |
| 25,000 to 49,999 | 0 |
| 50,000 to 74,999 | 0 |
| 75,000 to 99,999 | 0 |
| 100,000 to 149,999 | 0 |
| 150,000 and above | 0 |
Under 25,000: 0; 25,000 to 49,999: 0; 50,000 to 74,999: 0; 75,000 to 99,999: 0; 100,000 to 149,999: 0; 150,000 and above: 0
No usable failure mileage is recorded. 0 complaints have missing, zero or invalid mileage.
Complaints over time
Year the complaint was filed, not the vehicle model year or incident year. The snapshot year is partial.
No usable records for this chart.
| Category | Count |
|---|
No records.
Pattern summary
There is not enough complaint evidence to summarize patterns.
Calculated from recorded counts. An AI narrative has not been published for this selection.
Examples from the source records
Examples provide context, not a representative sample or a verified diagnosis.
Recall history
5 distinct campaigns affect this selection. Announcement dates below are different from vehicle model years. A campaign may cover multiple years.
12V291000 · Structure:Frame And Members
Reported: 2012-06-22 (June 22, 2012)
VERMEER IS RECALLING CERTAIN MODEL YEAR 2010-2012 VERMEER R9X12T TRAILERS BECAUSE OF AN INADEQUATE CLEARANCE BETWEEN THE SLACK ADJUSTER ARM AND THE TRAILER FRAME. AS SUCH, THE AXLE COULD CONTACT THE ARM, BENDING IT. OVERTIME, ONE OR MORE OF THE BRAKES COULD LOSE ITS BRAKING CAPACITY DUE TO THE BENT SLACK ADJUSTER ARM.
Consequence: REDUCED BRAKING CAPACITY CAN LEAD TO INCREASED STOPPING DISTANCES AND/OR CRASH.
Remedy: VERMEER WILL NOTIFY OWNERS, AND WILL REPLACE THE AXLE, FREE OF CHARGE. THE SAFETY RECALL BEGAN ON AUGUST 6, 2012. OWNERS MAY CONTACT VERMEER AT 1-641-628-3141.
NHTSA campaign record ↗12V425000 · Service Brakes, Air:Supply:Hoses, Lines/Piping, And Fittings
Reported: 2012-08-31 (August 31, 2012)
Vermeer is recalling certain model year 2010-2012 R9X12T drilling fluid reclaimer trailers manufactured from March 01, 2010, through August 03, 2012. Due to interference between the air brake hoses and the frame cross-member at the rear axle, the air brake hose may become pinched or be damaged, resulting in the loss of air pressure to the air brakes.
Consequence: A loss of air pressure to the air brakes can result in a loss of service brakes, increasing the risk of a crash.
Remedy: Vermeer will notify owners, and dealers will re-reroute the air brake hose, free of charge. The recall began on September 27, 2012. Owners may contact Vermeer at 641-628-3141.
NHTSA campaign record ↗13V258000 · Service Brakes, Air
Reported: 2013-06-21 (June 21, 2013)
Vermeer Manufacturing Company (Vermeer) is recalling certain model year 2012-2013 R9X12T trailers manufactured May 25, 2012, through May 3, 2013. The air-brake booster valve was installed incorrectly, allowing the brake application time to exceed the permissable amount. Thus, these vehicles fail to conform to the requirements of Federal Motor Vehicle Safety Standard No. 121, "Air Brake Systems."
Consequence: The extra brake application time may result in extended stopping distances, increasing the risk of crash.
Remedy: Vermeer will notify owners, and dealers will re-plumb the air brake booster valve, free of charge. The recall began on July 29, 2013. Owners may contact Vermeer at 1-641-628-3141. Vermeer's recall number is IK00-1843.
NHTSA campaign record ↗13V343000 · Service Brakes, Air
Reported: 2013-08-05 (August 5, 2013)
Vermeer Manufacturing Company (Vermeer) is recalling certain model year 2010-2013 R9x12T drilling fluid reclaimer trailers manufactured January 31, 2010, through July 2, 2013. The air brake hose may become pinched or chafed on the axle support plate.
Consequence: As a result, the air brake line could become damaged, causing a loss of air pressure to the air brake system and a loss of service brakes or preventing the parking brake from releasing, increasing the risk of a crash.
Remedy: Vermeer will notify owners, and dealers will inspect the air brake hose clearance. If there is insufficient clearance, the rear cross member will be moved, free of charge. The recall began on September 25, 2013. Owners may contact Vermeer at 1-641-628-3141. Vermeer's recall number is IK00-1851.
NHTSA campaign record ↗14V410000 · Suspension
Reported: 2014-07-08 (July 8, 2014)
Vermeer Manufacturing Company (Vermeer) is recalling certain model year 2010-2014 R9X12T trailers manufactured November 28, 2012, to March 21, 2014; R400T trailers manufactured August 27, 2013, to June 16, 2014; and R600HC trailers manufactured October 28, 2013, to April 25, 2014. In the affected drilling fluid reclaimer trailers, the suspension pivot bolts could loosen causing axle separation.
Consequence: If the axle separates from the reclaimer, there is an increased risk of a crash.
Remedy: Vermeer will notify owners, and dealers will add welds to secure the suspension pivot bolts, free of charge. The recall began on September 8, 2014. Owners may contact Vermeer customer service at 1-800-829-0051. Vermeer's number for this recall is IK00-3061.
NHTSA campaign record ↗