1997 Utilimaster WALK-IN VAN: complaints, problems and recalls
Explore the records behind recurring owner reports.
Key facts
0 owner complaints analyzed
4 distinct recall campaigns
Not available median reported failure mileage
Scope: 1997 model year. Data snapshot: . 0 complaints include usable failure mileage.
Most common problems
No owner complaints are recorded for this selection. A complaint can name multiple components.
Component breakdown
Number of unique complaints naming each component. Top eight shown.
No usable records for this chart.
| Category | Count |
|---|
No records.
Reported problems by failure mileage
Complaint counts in mileage bands. These are not failure rates per vehicle or mile.
| Category | Count |
|---|---|
| Under 25,000 | 0 |
| 25,000 to 49,999 | 0 |
| 50,000 to 74,999 | 0 |
| 75,000 to 99,999 | 0 |
| 100,000 to 149,999 | 0 |
| 150,000 and above | 0 |
Under 25,000: 0; 25,000 to 49,999: 0; 50,000 to 74,999: 0; 75,000 to 99,999: 0; 100,000 to 149,999: 0; 150,000 and above: 0
No usable failure mileage is recorded. 0 complaints have missing, zero or invalid mileage.
Complaints over time
Year the complaint was filed, not the vehicle model year or incident year. The snapshot year is partial.
No usable records for this chart.
| Category | Count |
|---|
No records.
Pattern summary
There is not enough complaint evidence to summarize patterns.
Calculated from recorded counts. An AI narrative has not been published for this selection.
Examples from the source records
Examples provide context, not a representative sample or a verified diagnosis.
Recall history
4 distinct campaigns affect this selection. Announcement dates below are different from vehicle model years. A campaign may cover multiple years.
01V224000 · Exterior Lighting
Reported: 2001-07-03 (July 3, 2001)
VEHICLE DESCRIPTION: WALK-IN VAN TRUCKS SUPPLIED TO FLEET ACCOUNTS. THE LED CLEARANCE LAMPS, MOUNTED AT A 30-DEGREE SET-BACK POSITION, DO NOT COMPLY WITH TWO OF THE REQUIRED TEST POINTS OF FMVSS NO. 108, "LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT."
Consequence: THE CLEARANCE LAMPS DO NOT MEET THE REQUIREMENTS OF THE STANDARD.
Remedy: OWNERS WILL BE PROVIDED WITH REMEDY INSTRUCTIONS FOR THIS CAMPAIGN AND WILL BE REIMBURSED BY UTILIMASTER FOR PARTS AND LABOR COSTS INVOLVED. OWNER NOTIFICATION BEGAN JULY 30, 2001. OWNERS WHO DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT UTILIMASTER AT 1-816-765-2000.
NHTSA campaign record ↗03V275000 · Electrical System:Wiring:Fuses And Circuit Breakers
Reported: 2003-07-29 (July 29, 2003)
ON CERTAIN WALK-IN VANS, A FUSE WAS INSTALLED BY FORD. HOWEVER, UTILIMASTER INSTALLED A WIRE. THE FUSE IS NOT COMPATIBLE WITH THE WIRE GAUGE INSTALLED BY UTILIMASTER.
Consequence: SHOULD A FAILURE OCCUR IN A VEHICLE COMPONENT SUCH AS A FAN, HEATED MIRROR AND/OR OTHER IGNITION-HOT OPTION, THE INSULATION AROUND THE WIRING TO THE FAN COULD MELT.
Remedy: OWNERS WILL BE PROVIDED WITH A REPLACEMENT FUSE. OWNER NOTIFICATION BEGAN OCTONER 1, 2003. OWNERS SHOULD CONTACT UTILIMASTER AT 1-800-582-3454.
NHTSA campaign record ↗18V377000 · Seat Belts:Front:Retractor
Reported: 2018-06-06 (June 6, 2018)
Spartan Motors USA (Spartan) is recalling certain 1991-2018 Utilimaster Aeromaster and Walk-In Vans. These vehicles were manufactured with front seat belts that do not have an emergency locking seat belt retractor or automatic locking seat belt retractor. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 208, "Occupant Crash Protection."
Consequence: Without retractors, the seat belts may not accommodate different size occupants, therefore the occupants may not be properly restrained in the event of a crash, increasing the risk of injury.
Remedy: Spartan will notify owners and will install seat belts with retractors, free of charge. The recall began on August 6, 2018. Owners may contact Spartan customer service at 1-800-582-3454. Spartan's number for this recall is 18019.
NHTSA campaign record ↗97V027000 · Structure:Body:Hood
Reported: 1997-02-22 (February 22, 1997)
WHEN THE VEHICLE IS BEING DRIVEN, THE FORCE OF THE WIND AGAINST THE HOOD CAN FORCE THE HOOD BEHIND THE BUMPER ALLOWING THE HOOD TO DROP. THIS REDUCES THE TENSION ON THE TWO RUBBER HOLD-DOWNS WHICH THEN BECOME LOOSE.
Consequence: IF BOTH TIE DOWNS COME LOOSE, THE HOOD CAN SEPARATE DURING VEHICLE OPERATION LEADING TO A POSSIBLE BROKEN WINDSHIELD AND/OR BLOCKING OF THE DRIVER'S VISION, INCREASING THE RISK OF A VEHICLE CRASH..
Remedy: DEALERS WILL ADD A METAL BRACKET AND A SECOND BUMPER ABOVE AND BEHIND THE ORIGINAL BUMPER SO THAT THE HOOD CANNOT BE PUSHED OR SLIP BEHIND THE ORIGINAL (BOTTOM) BUMPER.
NHTSA campaign record ↗