1984 Oshkosh S SERIES: complaints, problems and recalls
Explore the records behind recurring owner reports.
Key facts
0 owner complaints analyzed
4 distinct recall campaigns
Not available median reported failure mileage
Scope: 1984 model year. Data snapshot: . 0 complaints include usable failure mileage.
Most common problems
No owner complaints are recorded for this selection. A complaint can name multiple components.
Component breakdown
Number of unique complaints naming each component. Top eight shown.
No usable records for this chart.
| Category | Count |
|---|
No records.
Reported problems by failure mileage
Complaint counts in mileage bands. These are not failure rates per vehicle or mile.
| Category | Count |
|---|---|
| Under 25,000 | 0 |
| 25,000 to 49,999 | 0 |
| 50,000 to 74,999 | 0 |
| 75,000 to 99,999 | 0 |
| 100,000 to 149,999 | 0 |
| 150,000 and above | 0 |
Under 25,000: 0; 25,000 to 49,999: 0; 50,000 to 74,999: 0; 75,000 to 99,999: 0; 100,000 to 149,999: 0; 150,000 and above: 0
No usable failure mileage is recorded. 0 complaints have missing, zero or invalid mileage.
Complaints over time
Year the complaint was filed, not the vehicle model year or incident year. The snapshot year is partial.
No usable records for this chart.
| Category | Count |
|---|
No records.
Pattern summary
There is not enough complaint evidence to summarize patterns.
Calculated from recorded counts. An AI narrative has not been published for this selection.
Examples from the source records
Examples provide context, not a representative sample or a verified diagnosis.
Recall history
4 distinct campaigns affect this selection. Announcement dates below are different from vehicle model years. A campaign may cover multiple years.
84V110000 · Suspension:Multiple Axle
Reported: 1984-09-21 (September 21, 1984)
THESE TRUCKS WERE EQUIPPED WITH DEFECTIVE HYDRAULIC PRESSURE SWITCHES IN THE LOAD SPAN TAG SYSTEM. WHEN A MALFUNCTION IN THIS SYSTEM OCCURS, AXLE TO PAVEMENT PRESSURE INCREASES WHEN VEHICLE IS OPERATED IN AN UNLOADED CONDITION.
Remedy: THE EXISTING CONTROL SWITCH WILL BE REPLACED WITH A THREE-POSITION SWITCH WHICH, BY USE OF A NEUTRAL POSITION, WILL PREVE NT PRESSURE BUILDUP. A NEW OPERATION LABEL WILL ALSO BE INCLUDED.
NHTSA campaign record ↗85V022000 · Steering:Linkages:Drag:Link:Connection
Reported: 1985-03-01 (March 1, 1985)
LOOSENESS MAY DEVELOP AT THE ATTACHMENT (BALL JOINT) OF THE DRAG LINK TO THE STEERING ARM DUE TO AN INSUFFICIENTLY TIGHTENED RETAINING NUT. THIS CAN WEAR THE STEERING ARM HOLE. CONSEQUENCE OF DEFECT: STEERING LOOSENESS COULD CAUSE HANDLING DIFFICULTY WHICH MAY RESULT IN LOSS OF VEHICLE CONTROL AND AN ACCIDENT.
Remedy: REPLACE DRAG LINK BALL STUD IF WEAR IS OBSERVED AND/OR TORQUE TO SPECIFICATION.
NHTSA campaign record ↗88V093000 · Engine And Engine Cooling:Cooling System:Fan
Reported: 1988-06-13 (June 13, 1988)
FAN BLADE MAY CRACK AND SEPARATE WHERE THE BLADE OVERLAPS THE SPIDER.
Consequence: SEPARATED FAN BLADE COULD RESULT IN BODILY INJURY TOPERSONS NEAR BY AND ALSO COULD DAMAGE THE ENGINE, RADIATOR, ETC.
Remedy: INSTALL A NEW ALL STEEL FAN.
NHTSA campaign record ↗91V089000 · Structure
Reported: 1991-06-04 (June 4, 1991)
STEP TREAD WAS DESIGNED WITH AN UPTURNED EDGE. ALSO, INCORRECT BOLTS WERE USED TO ATTACH THE STEPS TO VEHICLE; INCORRECT BOLTS MAY FATIGUE AND BREAK ALLOWING THE STEPS TO SEPARATE FROM CAB.
Consequence: PERSONS EXITING THE CAB CAN TRIP AND FALL ON UPTURNEDEDGES. ALSO, FATIGUE OR BROKEN BOLTS COULD CAUSE THE STEPS TO BREAK AWAY AT THETIME THAT A PERSON IS ENTERING OR EXITING THE VEHICLES.
Remedy: REPLACE INCORRECTLY DESIGNED STEPS, REPLACE INCORRECT BOLTS.
NHTSA campaign record ↗