1998 Navistar 9300: complaints, problems and recalls
Explore the records behind recurring owner reports.
Key facts
0 owner complaints analyzed
4 distinct recall campaigns
Not available median reported failure mileage
Scope: 1998 model year. Data snapshot: . 0 complaints include usable failure mileage.
Most common problems
No owner complaints are recorded for this selection. A complaint can name multiple components.
Component breakdown
Number of unique complaints naming each component. Top eight shown.
No usable records for this chart.
| Category | Count |
|---|
No records.
Reported problems by failure mileage
Complaint counts in mileage bands. These are not failure rates per vehicle or mile.
| Category | Count |
|---|---|
| Under 25,000 | 0 |
| 25,000 to 49,999 | 0 |
| 50,000 to 74,999 | 0 |
| 75,000 to 99,999 | 0 |
| 100,000 to 149,999 | 0 |
| 150,000 and above | 0 |
Under 25,000: 0; 25,000 to 49,999: 0; 50,000 to 74,999: 0; 75,000 to 99,999: 0; 100,000 to 149,999: 0; 150,000 and above: 0
No usable failure mileage is recorded. 0 complaints have missing, zero or invalid mileage.
Complaints over time
Year the complaint was filed, not the vehicle model year or incident year. The snapshot year is partial.
No usable records for this chart.
| Category | Count |
|---|
No records.
Pattern summary
There is not enough complaint evidence to summarize patterns.
Calculated from recorded counts. An AI narrative has not been published for this selection.
Examples from the source records
Examples provide context, not a representative sample or a verified diagnosis.
Recall history
4 distinct campaigns affect this selection. Announcement dates below are different from vehicle model years. A campaign may cover multiple years.
98V117000 · Electrical System:Wiring
Reported: 1998-05-27 (May 27, 1998)
VEHICLE DESCRIPTION: HEAVY DUTY TRUCKS EQUIPPED WITH PROSLEEPER BUNKS. A MICRO RELAY LOCATED BEHIND THE HVAC CONTROL PANEL IN THE BUNK CAN CORRODE FROM MOISTURE.
Consequence: THIS CONDITION CAN RESULT IN A SHORT CIRCUIT BETWEEN CONTACTS ON THE RELAY INCREASING THE RISK OF A VEHICLE FIRE.
Remedy: DEALERS WILL REMOVE THE EXISTING RELAY AND REPLACE IT WITH A SEALED RELAY.
NHTSA campaign record ↗98V290000 · Power Train:Driveline
Reported: 1998-11-09 (November 9, 1998)
VEHICLE DESCRIPTION: HEAVY DUTY TRUCKS EQUIPPED WITH SPICER SPL170 55MM CENTER BERING PACKAGE. THE END YOKE RETAINING NUT CAN LOOSEN.
Consequence: IF THIS CONDITION OCCURS, THE DRIVE LINE CAN VIBRATE AND SEPARATE FROM THE VEHICLE, CAUSING VEHICULAR DAMAGE, OR PERSONAL INJURY, OR BOTH.
Remedy: DEALERS WILL REMOVE THE 55MM CENTER BEARING PACKAGE AND COUPLER SHAFT, AND REPLACE IT WITH A NEW COUPLER SHAFT AND A 60MM CENTER BEARING PACKAGE. AN INTERIM REMEDY CAN BE IMPLEMENTED BY PLACING A SPOT WELD ON THE COUPLING SHAFT THREADS UNTIL PARTS ARE AVAILABLE.
NHTSA campaign record ↗99V014002 · Suspension:Front:Wheel Bearing
Reported: 1999-03-15 (March 15, 1999)
VEHICLE DESCRIPTION: CLASS 8 HEAVY DUTY TRUCK CHASSIS EQUIPPED WITH 16,000 LB., 18,000 LB., OR 20,000 LB. HEAVY DUTY STEERING AXLES. THE INNER WHEEL BEARING CONE FOR THE STEERING AXLE WHEEL HUB ASSEMBLY DOES NOT PROPERLY FIT ONTO THE NAVISTAR STEERING AXLE SPINDLE ASSEMBLY. IMPROPER FIT OF THE BEARING TO THE SPINDLE INCREASES THE STRESS LEVELS TO THE STEERING AXLE SPINDLE WHICH COULD CAUSE SPINDLE FAILURE.
Consequence: IF THE SPINDLE FAILS, A LOSS OF DRIVER CONTROL COULD OCCUR, INCREASING THE RISK OF A VEHICLE CRASH.
Remedy: DEALERS WILL REMOVE THE LEFT AND RIGHT HUB/DRUM ASSEMBLIES FROM THE STEERING AXLES AND REPLACE THE INNER WHEEL BEARING CONES AND CUPS.
NHTSA campaign record ↗99V128003 · Suspension:Front:Hub
Reported: 1999-07-15 (July 15, 1999)
VEHICLE DESCRIPTION: TRUCKS ASSEMBLED WITH SKF LEVEL 2 TRUCK HUB UNITS (THU) RECEIVED FROM MERITOR. THESE HUBS CAN FATIGUE CRACK.
Consequence: THIS FATIGUE CRACKING CAN RESULT IN WHEEL SEPARATION, INCREASING THE RISK OF A CRASH.
Remedy: DEALERS WILL REPLACE THESE HUBS WITH PRODUCTION LEVEL 3 HUBS.
NHTSA campaign record ↗