1978 Mazda GLC: complaints, problems and recalls
Explore the records behind recurring owner reports.
Key facts
0 owner complaints analyzed
2 distinct recall campaigns
Not available median reported failure mileage
Scope: 1978 model year. Data snapshot: . 0 complaints include usable failure mileage.
Most common problems
No owner complaints are recorded for this selection. A complaint can name multiple components.
Component breakdown
Number of unique complaints naming each component. Top eight shown.
No usable records for this chart.
| Category | Count |
|---|
No records.
Reported problems by failure mileage
Complaint counts in mileage bands. These are not failure rates per vehicle or mile.
| Category | Count |
|---|---|
| Under 25,000 | 0 |
| 25,000 to 49,999 | 0 |
| 50,000 to 74,999 | 0 |
| 75,000 to 99,999 | 0 |
| 100,000 to 149,999 | 0 |
| 150,000 and above | 0 |
Under 25,000: 0; 25,000 to 49,999: 0; 50,000 to 74,999: 0; 75,000 to 99,999: 0; 100,000 to 149,999: 0; 150,000 and above: 0
No usable failure mileage is recorded. 0 complaints have missing, zero or invalid mileage.
Complaints over time
Year the complaint was filed, not the vehicle model year or incident year. The snapshot year is partial.
No usable records for this chart.
| Category | Count |
|---|
No records.
Pattern summary
There is not enough complaint evidence to summarize patterns.
Calculated from recorded counts. An AI narrative has not been published for this selection.
Examples from the source records
Examples provide context, not a representative sample or a verified diagnosis.
Recall history
2 distinct campaigns affect this selection. Announcement dates below are different from vehicle model years. A campaign may cover multiple years.
83V052000 · Seat Belts:Front:Anchorage
Reported: 1983-05-10 (May 10, 1983)
ANCHORAGE BOLT MAY HAVE BEEN IMPROPERLY REINSTALLED AFTER VEHICLE REPAIR. THE BOLT COULD LOOSEN DURING NORMAL VEHICLE OPERATION.
Remedy: UPON INSPECTION, ALL IMPROPERLY INSTALLED BOLTS WILL BE REMOVED AND REINSTALLED CORRECTLY.
NHTSA campaign record ↗85V108000 · Steering
Reported: 1985-09-04 (September 4, 1985)
IN CERTAIN HIGH SALT AREAS, THE IDLER ARM IS EXPOSED TO ROAD SALT WHICH CAUSES THE DUST SEAL TO DETERIORATE RESULTING IN IDLER ARM PIN CORROSION. THIS CAUSES THE PIN TO FREEZE AND BREAK. CONSEQUENCE OF DEFECT: A BROKEN IDLER ARM PIN COULD RESULT IN LOSS OF STEERING CONTROL AND MAY CAUSE AN ACCIDENT.
Remedy: REPLACE PIN WITH ONE OF IMPROVED CORROSION RESISTANT QUALITY.
NHTSA campaign record ↗