1989 Marmon CHDT SERIES: complaints, problems and recalls
Explore the records behind recurring owner reports.
Key facts
0 owner complaints analyzed
1 distinct recall campaigns
Not available median reported failure mileage
Scope: 1989 model year. Data snapshot: . 0 complaints include usable failure mileage.
This selection has limited data. It remains available for lookup but is excluded from search indexing.
Most common problems
No owner complaints are recorded for this selection. A complaint can name multiple components.
Component breakdown
Number of unique complaints naming each component. Top eight shown.
No usable records for this chart.
| Category | Count |
|---|
No records.
Reported problems by failure mileage
Complaint counts in mileage bands. These are not failure rates per vehicle or mile.
| Category | Count |
|---|---|
| Under 25,000 | 0 |
| 25,000 to 49,999 | 0 |
| 50,000 to 74,999 | 0 |
| 75,000 to 99,999 | 0 |
| 100,000 to 149,999 | 0 |
| 150,000 and above | 0 |
Under 25,000: 0; 25,000 to 49,999: 0; 50,000 to 74,999: 0; 75,000 to 99,999: 0; 100,000 to 149,999: 0; 150,000 and above: 0
No usable failure mileage is recorded. 0 complaints have missing, zero or invalid mileage.
Complaints over time
Year the complaint was filed, not the vehicle model year or incident year. The snapshot year is partial.
No usable records for this chart.
| Category | Count |
|---|
No records.
Pattern summary
There is not enough complaint evidence to summarize patterns.
Calculated from recorded counts. An AI narrative has not been published for this selection.
Examples from the source records
Examples provide context, not a representative sample or a verified diagnosis.
Recall history
1 distinct campaigns affect this selection. Announcement dates below are different from vehicle model years. A campaign may cover multiple years.
89V209000 · Service Brakes, Hydraulic:Foundation Components:Hoses, Lines/Piping, And Fittings
Reported: 1989-11-29 (November 29, 1989)
NON-DOT "PUSH-ON" TYPE HOSES WERE USED IN CERTAIN ACCESSORY NON-BRAKE AIR SYSTEMS, WITHOUT ISOLATION OF THAT SYSTEM BY A CHECK VALVE, PRESSURE PROTECTION VALVE, OR OTHER MEANS OF SYSTEM SEPARATION.
Consequence: TRUCKS DO NOT COMPLY WITH FMVSS 106; THERE COULD BE ANUNCHECKED LOSS OF AIR PRESSURE IN THE BRAKES THAT COULD RESULT IN THE LOSS OFSERVICE BRAKES AND TRUCK CONTROL.
Remedy: INSTALL PRESSURE PROTECTION VALVE(S) IN THE AIR SYSTEM TO ISOLATE ALL ACCESSORY AIR LINES FROM THE BRAKE SYSTEM.
NHTSA campaign record ↗