vehicle signal
U.S. public vehicle records

2020 Kenworth W990: complaints, problems and recalls

Explore the records behind recurring owner reports.

Key facts

0 owner complaints analyzed

5 distinct recall campaigns

Not available median reported failure mileage

Scope: 2020 model year. Data snapshot: . 0 complaints include usable failure mileage.

Owner-reported patterns

Most common problems

No owner complaints are recorded for this selection. A complaint can name multiple components.

Component breakdown

Number of unique complaints naming each component. Top eight shown.

No usable records for this chart.

Component breakdown data
CategoryCount

No records.

Reported problems by failure mileage

Complaint counts in mileage bands. These are not failure rates per vehicle or mile.

Under 25,000
0
25,000 to 49,999
0
50,000 to 74,999
0
75,000 to 99,999
0
100,000 to 149,999
0
150,000 and above
0
Reported problems by failure mileage data
CategoryCount
Under 25,0000
25,000 to 49,9990
50,000 to 74,9990
75,000 to 99,9990
100,000 to 149,9990
150,000 and above0

Under 25,000: 0; 25,000 to 49,999: 0; 50,000 to 74,999: 0; 75,000 to 99,999: 0; 100,000 to 149,999: 0; 150,000 and above: 0

No usable failure mileage is recorded. 0 complaints have missing, zero or invalid mileage.

Complaints over time

Year the complaint was filed, not the vehicle model year or incident year. The snapshot year is partial.

No usable records for this chart.

Complaints over time data
CategoryCount

No records.

Pattern summary

There is not enough complaint evidence to summarize patterns.

Calculated from recorded counts. An AI narrative has not been published for this selection.

Examples from the source records

Examples provide context, not a representative sample or a verified diagnosis.

Recall history

5 distinct campaigns affect this selection. Announcement dates below are different from vehicle model years. A campaign may cover multiple years.

19V176000 · Suspension:Rear:Axle:Non-Powered Axle Assembly

Reported: 2019-03-05 (March 5, 2019)

PACCAR Incorporated (PACCAR) is recalling certain 2020 Kenworth T680, T800, T880, W900 and W990 trucks. The rear axles may not contain oil.

Consequence: Without lubricating oil, the bearings, hub and axle shafts may wear, resulting in the separation of a wheel end from the axle, increasing the risk of a crash.

Remedy: Paccar will notify owners, and Kenworth dealers will inspect all of the rear axles for the presence of oil. If no oil is present, the wheels ends will be removed and the bearings, hub and axle shaft will be inspected for damage. If excessive wear or heat damage is evident, the components will be replaced, as necessary. Oil will then be added per the axle specifications. These repairs will be performed free of charge. The recall began April 16, 2019. Owners may contact Kenworth customer service at 1-425-828-5888. Paccar's number for this recall is 19KWA.

NHTSA campaign record ↗
19V911000 · Power Train:Axle Assembly:Axle Shaft | Power Train:Driveline:Driveshaft

Reported: 2019-12-19 (December 19, 2019)

PACCAR Incorporated (PACCAR) is recalling certain 2020 Kenworth T800, T880 and W990 and Peterbilt 348, 367, 389, 520, and 567 vehicles. The forward rear axle output shafts may have been improperly heat treated during manufacturing, possibly resulting in the shafts fracturing.

Consequence: If the rear axle output shaft fractures, the shaft or interaxle driveline could detach and become a road hazard, increasing the risk of a crash.

Remedy: PACCAR will notify owners, and dealers will inspect and replace the output shafts, as necessary, free of charge. The recall began February 19, 2020. Owners may contact Kenworth customer service at 1-425-828-5888 or Peterbilt customer service at 1-940-591-4220. PACCAR's numbers for this recall are 19KWE and 19PBG.

NHTSA campaign record ↗
20V506000 · Power Train:Axle Assembly

Reported: 2020-08-26 (August 26, 2020)

PACCAR Incorporated (PACCAR) is recalling certain 2020-2021 Peterbilt 348, 365, 367, 389, 520, 567 and Kenworth T800, T880, W900, W990 vehicles equipped with Watson and Chalin steerable lift axle suspension systems (model SL2065). The axles may have lower rear pivot bolts that are not long enough to sufficiently engage the locking feature of the corresponding nuts.

Consequence: The short screws can cause the hardware to separate from the suspension system and become road hazards, increasing the risk of a crash and/or injury.

Remedy: PACCAR will notify owners, and dealers will inspect suspect chassis and replace the pivot bolts, as necessary, free of charge. The recall began September 29, 2020. Owners may contact Kenworth customer service at 1-425-828-5888 and Peterbilt customer service at 1-940-591-4220. PACCAR's numbers for this recall is 20PBE and 20KWC.

NHTSA campaign record ↗
21V906000 · Electrical System:Software | Service Brakes, Air

Reported: 2021-11-19 (November 19, 2021)

PACCAR Incorporated (PACCAR) is recalling certain 2019-2022 Kenworth T880, W990, Peterbilt 567, 579, 389, and 2022 Peterbilt 536, 537 wrecker and auto hauler vehicles. The work brake (winch brake) may unintentionally disengage the service brakes during winching operations, causing the vehicle to roll.

Consequence: Unintended vehicle movement can increase the risk of a crash or injury.

Remedy: Dealers will update the vehicle software, free of charge. Owner notification letters were mailed on January 3, 2022. Owners may contact PACCAR customer service at 1-425-828-5888 (Kenworth); or 1-940-591-4220 (Peterbilt). PACCAR's numbers for this recall are 21KWG and 21PBM.

NHTSA campaign record ↗
22V277000 · Steering:Critical Fasteners

Reported: 2022-04-25 (April 25, 2022)

PACCAR Incorporated (PACCAR) is recalling certain 2018-2020 Kenworth T270, T370, T440, T470, T660, T680, T880, T800, W900, W990; and 2018-2020 Peterbilt 330, 337, 348, 365, 367, 389, 520, 567, and 579 vehicles. The Dana D-Series axle steer arm fasteners that attach the steering arm to the steering knuckle may fail.

Consequence: Fastener failure can result in a loss of steering control, increasing the risk of a crash or injury.

Remedy: Dealers will replace and torque the steer arm fasteners, at no charge. Owner notification letters were mailed November 8, 2022. Owners may contact Kenworth customer service at 1-425-828-5888 and Peterbilt customer service at 1-940-591-4220. PACCAR's numbers for this recall are 22 PBB and 22 KWB.

NHTSA campaign record ↗