1990 Kenworth T600A: complaints, problems and recalls
Explore the records behind recurring owner reports.
Key facts
0 owner complaints analyzed
2 distinct recall campaigns
Not available median reported failure mileage
Scope: 1990 model year. Data snapshot: . 0 complaints include usable failure mileage.
Most common problems
No owner complaints are recorded for this selection. A complaint can name multiple components.
Component breakdown
Number of unique complaints naming each component. Top eight shown.
No usable records for this chart.
| Category | Count |
|---|
No records.
Reported problems by failure mileage
Complaint counts in mileage bands. These are not failure rates per vehicle or mile.
| Category | Count |
|---|---|
| Under 25,000 | 0 |
| 25,000 to 49,999 | 0 |
| 50,000 to 74,999 | 0 |
| 75,000 to 99,999 | 0 |
| 100,000 to 149,999 | 0 |
| 150,000 and above | 0 |
Under 25,000: 0; 25,000 to 49,999: 0; 50,000 to 74,999: 0; 75,000 to 99,999: 0; 100,000 to 149,999: 0; 150,000 and above: 0
No usable failure mileage is recorded. 0 complaints have missing, zero or invalid mileage.
Complaints over time
Year the complaint was filed, not the vehicle model year or incident year. The snapshot year is partial.
No usable records for this chart.
| Category | Count |
|---|
No records.
Pattern summary
There is not enough complaint evidence to summarize patterns.
Calculated from recorded counts. An AI narrative has not been published for this selection.
Examples from the source records
Examples provide context, not a representative sample or a verified diagnosis.
Recall history
2 distinct campaigns affect this selection. Announcement dates below are different from vehicle model years. A campaign may cover multiple years.
91V044000 · Suspension:Rear
Reported: 1991-03-14 (March 14, 1991)
REAR AXLE STABILIZER (SWAY) BAR MAY NOT HAVE BEEN PROPERLY HEAT TREATED.
Remedy: REPLACE THE STABILIZER BAR.
NHTSA campaign record ↗91V090000 · Visibility:Windshield Wiper/Washer:Linkages
Reported: 1991-06-10 (June 10, 1991)
SPRAGUE WIPER ASSEMBLY PIVOT CAN SEIZE DUE TO GALVANIC CORROSION BETWEEN THE ZINC-PLATED STEEL SHAFT AND THE BRONZE BUSHINGS.
Consequence: THIS CORROSION CAN CAUSE WIPER ARM/BLADE ASSEMBLY TO STOPWIPING WINDSHIELD, THIS COULD AFFECT DRIVER VISIBILITY AND RESULT IN ANACCIDENT.
Remedy: REPLACE SPRAGUE WIPER ASSEMBLY PIVOT WITH AN ASSEMBLY NOT SUSCEPTIBLE TO GALVANIC CORROSION.
NHTSA campaign record ↗