2018 Kawasaki ZX1002A: complaints, problems and recalls
Explore the records behind recurring owner reports.
Key facts
0 owner complaints analyzed
3 distinct recall campaigns
Not available median reported failure mileage
Scope: 2018 model year. Data snapshot: . 0 complaints include usable failure mileage.
Most common problems
No owner complaints are recorded for this selection. A complaint can name multiple components.
Component breakdown
Number of unique complaints naming each component. Top eight shown.
No usable records for this chart.
| Category | Count |
|---|
No records.
Reported problems by failure mileage
Complaint counts in mileage bands. These are not failure rates per vehicle or mile.
| Category | Count |
|---|---|
| Under 25,000 | 0 |
| 25,000 to 49,999 | 0 |
| 50,000 to 74,999 | 0 |
| 75,000 to 99,999 | 0 |
| 100,000 to 149,999 | 0 |
| 150,000 and above | 0 |
Under 25,000: 0; 25,000 to 49,999: 0; 50,000 to 74,999: 0; 75,000 to 99,999: 0; 100,000 to 149,999: 0; 150,000 and above: 0
No usable failure mileage is recorded. 0 complaints have missing, zero or invalid mileage.
Complaints over time
Year the complaint was filed, not the vehicle model year or incident year. The snapshot year is partial.
No usable records for this chart.
| Category | Count |
|---|
No records.
Pattern summary
There is not enough complaint evidence to summarize patterns.
Calculated from recorded counts. An AI narrative has not been published for this selection.
Examples from the source records
Examples provide context, not a representative sample or a verified diagnosis.
Recall history
3 distinct campaigns affect this selection. Announcement dates below are different from vehicle model years. A campaign may cover multiple years.
20V676000 · Electrical System:Software | Power Train:Manual Transmission
Reported: 2020-11-02 (November 2, 2020)
Kawasaki Motors Corp., U.S.A. (KMC) is recalling certain 2018-2020 Ninja H2 SX, Ninja H2 SXSE, and 2019-2020 Ninja H2 SXSE+ motorcycles. In the event of a gear misengagement the engine electronic control unit (ECU) programming doesn't have the capability to suppress high RPM during transmission. If the transmission gears are not properly engaged while shifting into 4th or 5th gear, high engine RPM can cause the output gears of 4th or 5th to fracture when the gears re-engage.
Consequence: Damaged gears and the inability to shift can cause the engine to lock up, increasing the risk of a crash.
Remedy: KMC will notify owners, and dealers will reprogram the FI-ECU software, free of charge. Owners are advised to not ride their motorcycle until the repair has been completed. The recall began November 16, 2020. Owners may contact KMC customer service at 1-866-802-9381. KMC's number for this recall is MC20-10.
NHTSA campaign record ↗21V594000 · Suspension:Rear:Motorcycle Fork/Swingarm:Bearings
Reported: 2021-07-30 (July 30, 2021)
Kawasaki Motors Corp., U.S.A. (KMC) is recalling certain 2018 Ninja H2 SX, Ninja H2 SX SE, and 2019-2021 Ninja H2 SX SE+ motorcycles. An insufficient amount of grease in the rear hub needle-bearing may cause it to fail, which could result in the rear wheel locking up.
Consequence: Rear wheel lock-up can increase the risk of a crash.
Remedy: Dealers will replace the needle-bearing, free of charge. Owner notification letters were mailed August 23, 2021. Owners may contact KMC customer service at 1-866-802-9381. KMC's number for this recall is MC21-04.
NHTSA campaign record ↗22V912000 · Engine And Engine Cooling:Engine
Reported: 2022-12-09 (December 9, 2022)
Kawasaki Motors Corp., U.S.A. (KMC) is recalling certain 2015-2018 ZX1000, 2018 ZX1002A, ZX1002B, 2019-2021 ZX1002D, 2019-2022 ZX1002J, 2020-2023 ZR1000K, 2021-2022 ZR1000L, 2022 ZX1002R, and 2023 ZR1002L (Ninja H2, Ninja H2 Carbon, Ninja H2 SX, Ninja H2 SX SE, Ninja H2 SX SE+, Z H2, and Z H2 SE) motorcycles. Please see the attached model information chart for a detailed list of model codes, names and years. The plunger in the camshaft chain tensioner may lock, which can result in an engine stall while riding.
Consequence: An engine stall while riding can increase the risk of a crash or injury.
Remedy: Dealers will replace the camshaft chain tensioner, free of charge. Owner notification letters were mailed December 21, 2022. Owners may contact KMC customer service at 1-866-802-9381.
NHTSA campaign record ↗