1981 International Harvester S2500: complaints, problems and recalls
Explore the records behind recurring owner reports.
Key facts
0 owner complaints analyzed
3 distinct recall campaigns
Not available median reported failure mileage
Scope: 1981 model year. Data snapshot: . 0 complaints include usable failure mileage.
Most common problems
No owner complaints are recorded for this selection. A complaint can name multiple components.
Component breakdown
Number of unique complaints naming each component. Top eight shown.
No usable records for this chart.
| Category | Count |
|---|
No records.
Reported problems by failure mileage
Complaint counts in mileage bands. These are not failure rates per vehicle or mile.
| Category | Count |
|---|---|
| Under 25,000 | 0 |
| 25,000 to 49,999 | 0 |
| 50,000 to 74,999 | 0 |
| 75,000 to 99,999 | 0 |
| 100,000 to 149,999 | 0 |
| 150,000 and above | 0 |
Under 25,000: 0; 25,000 to 49,999: 0; 50,000 to 74,999: 0; 75,000 to 99,999: 0; 100,000 to 149,999: 0; 150,000 and above: 0
No usable failure mileage is recorded. 0 complaints have missing, zero or invalid mileage.
Complaints over time
Year the complaint was filed, not the vehicle model year or incident year. The snapshot year is partial.
No usable records for this chart.
| Category | Count |
|---|
No records.
Pattern summary
There is not enough complaint evidence to summarize patterns.
Calculated from recorded counts. An AI narrative has not been published for this selection.
Examples from the source records
Examples provide context, not a representative sample or a verified diagnosis.
Recall history
3 distinct campaigns affect this selection. Announcement dates below are different from vehicle model years. A campaign may cover multiple years.
81V109000 · Steering: Steering Wheel/Handle Bar
Reported: 1981-09-16 (September 16, 1981)
THE STEERING COLUMN YOKE UNIT MAY HAVE BEEN ASSEMBLED WITH A 3/8 INCH BOLT AND 30-35 FT/LBS OF TORQUE INSTEAD OF THE SPECIFIED 7/16 INCH BOLT REQUIRING 60-65 FT/LBS.
Remedy: THE INADEQUATE BOLT WILL BE REPLACED WITH THE PROPER 7/16 INCH BOLT AND LOCK NUT, AND THE PROPER TORQUE OF 60-65 FT/LBS WILL BE APPLIED.
NHTSA campaign record ↗83V001000 · Steering:Gear Box (Other Than Rack And Pinion)
Reported: 1983-01-10 (January 10, 1983)
UNDER CERTAIN CIRCUMSTANCES, THE OUTPUT SHAFT OF THE STEERING GEAR MAY DEVELOP CRACKS AT A LOCATION BETWEEN THE GEAR AND THE PITMAN ARM MOUNTING. THE SUSPECT COMPONENT IS FOUND ON STEERING GEARS WITH THE CODE 05057. CONTINUED OPERATION MAY RESULT IN FRACTURE AND DISCONNECTION OF THE STEERING LINKAGE.
Remedy: THE DEALER WILL REMOVE ORIGINAL OUTPUT SHAFT FROM STEERING GEAR AND REPLACE IT WITH A NEW CASE-HARDENED SHAFT FREE OF CHARGE.
NHTSA campaign record ↗83V074000 · Trailer Hitches:Fifth Wheel Assembly
Reported: 1983-08-17 (August 17, 1983)
BOLTS WHICH MOUNT THE FIFTH WHEEL BASE PLATE TO THE FRAME BRACKETS MAY NOT BE SECURELY FASTENED.
Remedy: UPON INSPECTION, BOLTS WILL BE TIGHTENED, AND ANY DAMAGED PARTS WILL BE REPLACED. ALL FASTENERS WILL BE TIGHTENED TO 145 TO 175 FT. LBS. AS REQUIRED.
NHTSA campaign record ↗