1994 Gmc C35: complaints, problems and recalls
Explore the records behind recurring owner reports.
Key facts
2 owner complaints analyzed
7 distinct recall campaigns
Not available median reported failure mileage
Scope: 1994 model year. Data snapshot: . 0 complaints include usable failure mileage.
Most common problems
Service Brakes, Hydraulic:Antilock/Traction Control/Electronic Limited Slip is the most frequently named component, appearing in 1 of 2 complaints (50.0%). A complaint can name multiple components.
| Topic | Matching reports | Share of complaints |
|---|---|---|
| Braking behavior | 2 | 100.0% |
Topic matches use published keyword rules. They describe mentions, including negations or comparisons, and do not confirm a diagnosis. Read the matching rules.
Component breakdown
Number of unique complaints naming each component. Top eight shown.
| Category | Count |
|---|---|
| Service Brakes, Hydraulic:Antilock/Traction Control/Electronic Limited Slip | 1 |
| Service Brakes, Hydraulic:Foundation Components:Disc:Rotor | 1 |
Service Brakes, Hydraulic:Antilock/Traction Control/Electronic Limited Slip: 1; Service Brakes, Hydraulic:Foundation Components:Disc:Rotor: 1
Reported problems by failure mileage
Complaint counts in mileage bands. These are not failure rates per vehicle or mile.
| Category | Count |
|---|---|
| Under 25,000 | 0 |
| 25,000 to 49,999 | 0 |
| 50,000 to 74,999 | 0 |
| 75,000 to 99,999 | 0 |
| 100,000 to 149,999 | 0 |
| 150,000 and above | 0 |
Under 25,000: 0; 25,000 to 49,999: 0; 50,000 to 74,999: 0; 75,000 to 99,999: 0; 100,000 to 149,999: 0; 150,000 and above: 0
No usable failure mileage is recorded. 2 complaints have missing, zero or invalid mileage.
Complaints over time
Year the complaint was filed, not the vehicle model year or incident year. The snapshot year is partial.
| Category | Count |
|---|---|
| 1995 | 1 |
| 1996 | 1 |
1995: 1; 1996: 1
Pattern summary
Service Brakes, Hydraulic:Antilock/Traction Control/Electronic Limited Slip leads the component reports. Braking behavior appears in 2 complaint narratives. Use these patterns to inspect individual reports and prepare questions for a mechanic.
Calculated from recorded counts. An AI narrative has not been published for this selection.
Examples from the source records
Examples provide context, not a representative sample or a verified diagnosis.
Owner report 801814 · 1996-09-04 (September 4, 1996)
WHEN INCLEMENT WEATHER OCCURS THE REAR ABS DOSN'T FUNCTION PROPERLY, RESULTING IN EXTENDED STOPPING DISTANCE.*AK
Owner-reported narrative. Look up ODI 801814 at NHTSA ↗
Owner report 961789 · 1995-03-13 (March 13, 1995)
FRONT BRAKES FAILED, DISC ROTORS ARE DEFECTIVE. TT
Owner-reported narrative. Look up ODI 961789 at NHTSA ↗
Recall history
7 distinct campaigns affect this selection. Announcement dates below are different from vehicle model years. A campaign may cover multiple years.
93V152000 · Service Brakes, Hydraulic:Pedals And Linkages
Reported: 1993-09-15 (September 15, 1993)
THE BRAKE PEDAL PUSH ROD RETAINER IS MISSING, MISPOSITIONED OR NOT PROPERLY SEATED.
Consequence: BRAKE PEDAL PUSH ROD PROBLEMS CAN CAUSE THE STOP LAMPSWITCH AND THE BRAKE BOOSTER PUSH ROD TO DISCONNECT FROM THE BRAKE PEDAL,RESULTING IN LOSS OF BRAKE OPERATION, AND A VEHICLE CRASH COULD OCCUR WITHOUTPRIOR WARNING.
Remedy: INSPECT VEHICLES TO ASSURE THE BRAKE PEDAL PUSH ROD RETAINER IS PRESENT AND FULLY SEATED IN ITS CORRECT POSITION.
NHTSA campaign record ↗93V216000 · Seats
Reported: 1993-12-14 (December 14, 1993)
THE SEATS HAVE BEEN ASSEMBLED WITHOUT BOLTS THAT CONNECT THE UPPER SLAVE HINGE TO THE SEAT BACK FRAME, OR WITHOUT BOLTS THAT CONNECT THE SEAT TO THE SEAT ADJUSTER. IN EITHER CASE, THE VEHICLES FAIL TO CONFORM TO FNVSS NO. 207, "SEATING SYSTEMS."
Consequence: THE MISSING BOLTS MAY CAUSE THE DRIVER'S SEAT TO BECOMELOOSE AND IN A SUDDEN STOP OR ACCIDENT MAY SUBJECT THE OCCUPANT TO INCREASEDRISK OF INJURY.
Remedy: DEALERS WILL INSPECT SEATS FOR MISSING BOLTS AND INSTALL BOLTS IF REQUIRED.
NHTSA campaign record ↗94V060000 · Suspension:Front:Control Arm:Lower Arm
Reported: 1994-04-05 (April 5, 1994)
TRUCKS WERE ASSEMBLED WITH THE LEFT-HAND LOWER CONTROL ARM TO FRAME REAR NUT TIGHTENED BELOW THE SPECIFIED TORQUE. LOW TORQUE ON THIS NUT MAY ALLOW THE ATTACHMENT BOLT TO LOOSED AND SUBSEQUENTLY FATIGUE AND BREAK. THE BOLT BREAKAGE CAN CAUSE THE LEFT HAND CONTROL ARM TO SEPARATE FROM THE FRAME.
Consequence: IF THIS OCCURS, A LOSS OF VEHICLE CONTROL AND A CRASH COULD RESULT.
Remedy: DEALERS WILL TIGHTEN THE LEFT-HAND LOWER CONTROL ARM TO FRAME REAR NUT TO THE PROPER TORQUE SPECIFICATION.
NHTSA campaign record ↗95V241000 · Seat Belts:Front
Reported: 1995-12-13 (December 13, 1995)
IF BOTH THE LAP-BELT AND SHOULDER-BELT ENERGY MANAGEMENT LOOPS ON THE FRONT SEAT BELT ASSEMBLIES RELEASE AT OR NEAR THE SAME TIME, ACCELERATION FORCES CAN CAUSE THE BUCKLE RELEASE MECHANISM TO ACTIVATE AND ALLOW THE BUCKLE TO SEPARATE FROM THE LATCH.
Consequence: IF THE BUCKLE RELEASED, THE SYSTEM WOULD FAIL TO PROVIDE ADEQUATE OCCUPANT RESTRAINT PROTECTION.
Remedy: DEALERS WILL REMOVE THE STITCHING THAT CREATES THE ENERGY MANAGEMENT LOOP IN THE SHOULDER BELT(S).
NHTSA campaign record ↗95V242000 · Seat Belts:Front
Reported: 1995-12-13 (December 13, 1995)
THESE VEHICLES WERE BUILT WITH FRONT SEAT BELT SYSTEMS WITH NO ENERGY MANAGEMENT LOOPS AND MAY NOT MEET THE HEAD INJURY CRITERIA REQUIREMENTS OF FMVSS NO. 208, "OCCUPANT CRASH PROTECTION."
Consequence: IN THE EVENT OF A VEHICLE CRASH, THE OCCUPANTS OF THESE SEATS MAY NOT BE PROPERLY RESTRAINED.
Remedy: DEALERS WILL REPLACE THE RETRACTOR PORTION OF THE SEAT BELT ASSEMBLY(S) WITH ONE HAVING THE NEWLY DESIGNED ENERGY-MANAGEMENT TWIN-LOOP SYSTEM.
NHTSA campaign record ↗95V246000 · Seats
Reported: 1995-12-21 (December 21, 1995)
THE SEAT RECLINER TO SEAT FRAME ATTACHING BOLTS ON THESE VEHICLE COULD LOOSEN, FATIGUE AND FRACTURE, ALLOWING THE SEAT BACK TO SUDDENLY RECLINE.
Consequence: IF THIS WERE TO OCCUR TO THE DRIVER'S SEAT, THIS COULD RESULT IN A SUDDEN LOSS OF VEHICLE CONTROL INCREASING THE RISK OF A VEHICLE ACCIDENT.
Remedy: DEALERS WILL REMOVE ALL FOAM AND/OR FABRIC SANDWICHED BETWEEN THE RECLINER ASSEMBLY AND THE SEAT FRAME, INSTALL WASHERS BETWEEN THE SEAT RECLINER AND THE SEAT FRAME AT EACH ATTACHMENT POINT, AND INSTALL NEW ATTACHING BOLTS TORQUED TO A HIGHER SPECIFICATION. THESE CORRECTIONS WILL BE MADE TO BOTH THE DRIVER'S AND PASSENGER'S SEATS.
NHTSA campaign record ↗99V025000 · Exterior Lighting:Brake Lights:Switch
Reported: 1999-02-05 (February 5, 1999)
VEHICLE DESCRIPTION: PICKUP TRUCKS, CREW CABS, UTILITY TRUCKS AND SPORT UTILITY VEHICLES. THESE VEHICLES WERE BUILT WITH THE POLARITY OF THE WIRING FOR THE ZERO ADJUST BRAKE SWITCH REVERSED FROM WHAT WAS SPECIFIED ON THE SWITCH DRAWING. WITH THE REVERSED POLARITY, THE CONTACTS IN THE BRAKE SWITCH CAN WEAR OUT PREMATURELY. THE BRAKE SWITCH WILL PERFORM NORMALLY UNTIL THE BRAKE SWITCH CONTACTS WEAR OUT, RESULTING IN LOSS OF THE BRAKE LAMPS WITHOUT ANY WARNING TO THE DRIVER.
Consequence: THIS WOULD FAIL TO WARN A FOLLOWING DRIVER THAT THE VEHICLE IS BRAKING AND COULD LEAD TO A CRASH.
Remedy: DEALERS WILL REPLACE THE BRAKE SWITCH AND REVERSE THE WIRING.
NHTSA campaign record ↗