2014 Ford F-450 SD: complaints, problems and recalls

THE HIGH PRESSURE FUEL PUMP FAILED. FORD CLAIMED THAT THIS WAS FROM CONTAMINATED FUEL. FORD HAS TWO FUEL FILTERS AND A WATER SEPARATOR. I PERSONALLY ADDED TWO ADDITIONAL FILTERS AND AN ADDITIONAL WATER SEPARATOR, FOR A TOTAL OF FOUR FILTERS AND TWO SEPARATORS. FORD ALSO HAS A WATER IN FUEL LIGHT THAT IS SUPPOSED TO ALERT THE DRIVER TO CONTAMINATION. AT NO TIME DID THIS LIGHT COME ON. IN SHORT, I BELIEVE FORD HAS A DEFECTIVE FUEL PUMP AND A DEFECTIVE FILTRATION AND WATER ALERTING SYSTEM. THIS TRUCK SHUTDOWN, WITH NO WARNING AT 70 MPH ON A…

Owner-reported narrative. 74,000 miles reported. Look up ODI 10871640 at NHTSA ↗

Reported: 2014-06-12 (June 12, 2014)

Stahl is recalling certain model year 2009-2014 Ford F-350 Super Duty, F-450 Super Duty, and F-550 Super Duty vehicles modified by Stahl and equipped with certain Muncie Power Products PTO Assemblies. In the affected vehicles, oil may leak from the PTO pressure switch onto a thermal blanket covering the exhaust.

Consequence: The leaking oil may soak into the thermal blanket covering the exhaust, which when combined with heat from exhaust, may result in an increased risk of fire.

Remedy: Stahl will notify owners, and dealers will install a new pressure switch kit that moves the switch away from the exhaust system, free of charge. Owners may contact Stahl customer service at 1-800-277-8245, or Muncie at 1-800-367-7867.

Reported: 2014-06-13 (June 13, 2014)

Iowa Mold Tooling Co., Inc. will notify owners and dealers to inspect the Muncie PTO pressure switch to determine if it is from the range of defective switches and if required, remove the pressure switch assembly and put a plug in the port where the PTO switch had been installed. This switch was never being utilized. This will be done free of charge. The recall is expected to begin in mid-July 2014. Owners may contact Iowa Mold Tooling Co., Inc. at 1-800-247-5958.

Consequence: The leaking oil may soak into the thermal blanket covering the exhaust, which when combined with heat from exhaust, may result in an increased risk of fire.

Remedy: Iowa Mold Tooling Co., Inc. will notify owners, and dealers will install a new pressure switch kit that moves the switch away from the exhaust system, free of charge. The recall began on July 28, 2014. Owners may contact Iowa Mold Tooling Co., Inc. at 1-800-247-5958.

Reported: 2015-01-22 (January 22, 2015)

Life Line Emergency Vehicles (Life Line) is recalling certain model year 2014-2015 Life Line-modified Ford F-Series emergency vehicles that are equipped with Liquid Spring-brand aftermarket suspension kits. The mounting bracket that attaches the suspension fluid tank to the frame may fail allowing the fluid tank to separate from the vehicle.

Consequence: If the suspension fluid tank mount fractures and the tank separates from the chassis, the tank may become a road hazard, increasing the risk of a crash.

Remedy: The remedy for this recall is still under development. The recall began on February 2, 2015. Owners may contact Life Line customer service at 1-563-578-3317.

Reported: 2015-03-25 (March 25, 2015)

Ford Motor Company (Ford) is recalling certain model year 2011-2015 Ford F-350, F-450, and F-550 trucks manufactured February 22, 2010, to January 30, 2015, and equipped with ambulance or fire engine preparation packages. The affected vehicles may detect an incorrect Exhaust Gas Temperature Sensor (EGT) fault indicating that the vehicle is too hot, causing the engine management system to shut down the engine and prevent its immediate restart.

Consequence: Engine shut down and a subsequent cool down period may delay medical treatment or assistance to those needing it, increasing their risk of injury.

Remedy: Ford will notify owners, and dealers will update the Powertrain Control Module (PCM) software, free of charge. The recall began on April 22, 2015. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 15S09.