1981 Ford E350: complaints, problems and recalls
Explore the records behind recurring owner reports.
Key facts
0 owner complaints analyzed
2 distinct recall campaigns
Not available median reported failure mileage
Scope: 1981 model year. Data snapshot: . 0 complaints include usable failure mileage.
Most common problems
No owner complaints are recorded for this selection. A complaint can name multiple components.
Component breakdown
Number of unique complaints naming each component. Top eight shown.
No usable records for this chart.
| Category | Count |
|---|
No records.
Reported problems by failure mileage
Complaint counts in mileage bands. These are not failure rates per vehicle or mile.
| Category | Count |
|---|---|
| Under 25,000 | 0 |
| 25,000 to 49,999 | 0 |
| 50,000 to 74,999 | 0 |
| 75,000 to 99,999 | 0 |
| 100,000 to 149,999 | 0 |
| 150,000 and above | 0 |
Under 25,000: 0; 25,000 to 49,999: 0; 50,000 to 74,999: 0; 75,000 to 99,999: 0; 100,000 to 149,999: 0; 150,000 and above: 0
No usable failure mileage is recorded. 0 complaints have missing, zero or invalid mileage.
Complaints over time
Year the complaint was filed, not the vehicle model year or incident year. The snapshot year is partial.
No usable records for this chart.
| Category | Count |
|---|
No records.
Pattern summary
There is not enough complaint evidence to summarize patterns.
Calculated from recorded counts. An AI narrative has not been published for this selection.
Examples from the source records
Examples provide context, not a representative sample or a verified diagnosis.
Recall history
2 distinct campaigns affect this selection. Announcement dates below are different from vehicle model years. A campaign may cover multiple years.
81V026000 · Steering: Steering Wheel/Handle Bar
Reported: 1981-02-26 (February 26, 1981)
THERE ARE THREE PINCH BOLTS THAT CONNECT TWO UNIVERSAL JOINTS IN THE STEERING COLUMN AND GEARBOX. PINCH BOLTS MAY NOT BE PROPERLY TIGHTENED. STEERING MAY BIND OR LOCK UP.
Remedy: THE STEERING COLUMN SHAFT COVER WILL BE REMOVED BY DISENGAGING AND REMOVING THE SELF TAPPING SCREWS IN ORDER TO SECURELY FASTEN THE PINCH BOLTS.
NHTSA campaign record ↗84V034000 · Fuel System, Gasoline:Storage:Tank Assembly:Mounting
Reported: 1984-03-23 (March 23, 1984)
ATTACHING BOLTS ON FUEL TANK SUPPORTS MAY NOT HAVE BEEN ADEQUATELY TIGHTENED; ALSO, THE SUPPORTS ARE TOO THIN. HIGH LEVELS OF STRESS, WHICH COULD OCCUR UNDER NORMAL OPERATING CONDITIONS, COULD CAUSE CRACKS TO DEVELOP IN THE SUPPORT STRAPS. IF THE FUEL TANK SUPPORTS FRACTURE, THE FUEL TANK WILL SLIP FROM THE NORMAL POSITION, AND FUEL LEAKAGE COULD RESULT.
Remedy: FUEL TANK SUPPORTS AND FASTENERS WILL BE REPLACED WITHOUT CHARGE.
NHTSA campaign record ↗