vehicle signal
U.S. public vehicle records

1978 Dodge W200: complaints, problems and recalls

Explore the records behind recurring owner reports.

Key facts

0 owner complaints analyzed

5 distinct recall campaigns

Not available median reported failure mileage

Scope: 1978 model year. Data snapshot: . 0 complaints include usable failure mileage.

Owner-reported patterns

Most common problems

No owner complaints are recorded for this selection. A complaint can name multiple components.

Component breakdown

Number of unique complaints naming each component. Top eight shown.

No usable records for this chart.

Component breakdown data
CategoryCount

No records.

Reported problems by failure mileage

Complaint counts in mileage bands. These are not failure rates per vehicle or mile.

Under 25,000
0
25,000 to 49,999
0
50,000 to 74,999
0
75,000 to 99,999
0
100,000 to 149,999
0
150,000 and above
0
Reported problems by failure mileage data
CategoryCount
Under 25,0000
25,000 to 49,9990
50,000 to 74,9990
75,000 to 99,9990
100,000 to 149,9990
150,000 and above0

Under 25,000: 0; 25,000 to 49,999: 0; 50,000 to 74,999: 0; 75,000 to 99,999: 0; 100,000 to 149,999: 0; 150,000 and above: 0

No usable failure mileage is recorded. 0 complaints have missing, zero or invalid mileage.

Complaints over time

Year the complaint was filed, not the vehicle model year or incident year. The snapshot year is partial.

No usable records for this chart.

Complaints over time data
CategoryCount

No records.

Pattern summary

There is not enough complaint evidence to summarize patterns.

Calculated from recorded counts. An AI narrative has not been published for this selection.

Examples from the source records

Examples provide context, not a representative sample or a verified diagnosis.

Recall history

5 distinct campaigns affect this selection. Announcement dates below are different from vehicle model years. A campaign may cover multiple years.

77V212000 · Fuel System, Gasoline:Delivery:Hoses, Lines/Piping, And Fittings

Reported: 1977-11-28 (November 28, 1977)

THE FUEL TUBES (FUEL TANK TO PUMP) ON THE INVOLVED VEHICLES MAY BE ROUTED SUCH THAT TUBE TO UNDERBODY REINFORCEMENT FLANGE INTERFERENCE MAY RESULT DURING VEHICLE OPERATION. TUBE ABRASION CAUSED BY SUCH INTERFERENCE MAY RESULT IN FUEL LEAKAGE.

Remedy: DEALER WILL REROUTE THE FUEL TUBE OR INSTALL A NEW FUEL TUBE, IF DAMAGED, WITHOUT CHARGE TO OWNER.

NHTSA campaign record ↗
78V036000 · Fuel System, Gasoline:Storage:Tank Assembly

Reported: 1978-02-17 (February 17, 1978)

Remedy: DEALER WILL INSPECT THE FUEL TANK VENT SYSTEMS FOR BLOCKAGE AND CORRECT, IF NECESSARY. FUEL TANKS WILL BE INSPECTED FOR CRACKING OF THE FRONT PANEL AND REPLACED, IF NECESSARY.

NHTSA campaign record ↗
78V038000 · Steering: Steering Wheel/Handle Bar

Reported: 1978-02-17 (February 17, 1978)

AN INTERMEDIATE STEERING SHAFT CONTAINING A MISMATCHED POT COUPLING ASSEMBLY MAY HAVE BEEN INSTALLED ON THE INVOLVED VEHICLES. THIS COUPLING MAY HAVE AN OVERSIZED SERRATION DIAMETER. AN OVERSIZED SERRATION COULD PREVENT THE COUPLING FROM ADEQUATELY TIGHTENING ONTO THE GEAR OR SHAFT SPLINES.

Remedy: THE DEALER WILL INSPECT AND, IF NECESSARY, INSTALL A REPLACEMENT SHAFT COUPLING.

NHTSA campaign record ↗
78V141000 · Steering:Hydraulic Power Assist:Hose, Piping, And Connections

Reported: 1978-06-14 (June 14, 1978)

IMPROPER ROUTING OF THE "HYDROBOOST" HYDRAULIC SYSTEM HIGH PRESSURE HOSE ASSEMBLY COULD ALLOW A TUBULAR SECTION TO CONTACT THE FRAME SIDE RAIL. ABRASION FROM THE CONTACT COULD RESULT, CAUSING A LEAK IN THE HOSE ASSEMBLY.

Remedy: THE DEALER WILL REROUTE "HYDROBOOST" HIGH PRESSURE HOSE ASSEMBLIES AND ANY DAMAGED HOSES WILL BE REPLACED.

NHTSA campaign record ↗
78V188000 · Service Brakes, Hydraulic:Foundation Components:Hoses, Lines/Piping, And Fittings

Reported: 1978-08-29 (August 29, 1978)

DUE TO IMPROPER MATERIAL CONSTRUCTION THE HYDRO-BOOST FLUID RETURN HOSE MAY NOT BE CAPABLE OF WITHSTANDING THE TEMPERATURES AND/OR PRESSURES EXPERIENCED WITH THE HYDRO-BOOST SYSTEM. ALSO, THE HYDRO-BOOST FLUID HIGH PRESSURE HOSE ASSEMBLY MAY HAVE BEEN MISLOCATED, ALLOWING THE ASSEMBLY TO CONTACT THE FRAME SIDE RAIL. ABRASION RESULTING FROM CONTINUED CONTACT ALONG WITH IMPROPER MATERIAL CONSTRUCTION MAY CAUSE PRESSURE HOSE FAILURE. EITHER OF THESE CONDITIONS MAY CAUSE HYDRO-BOOST FLUID LEAKAGE, RESULTING IN THE LOSS OF POWER ASSIST FOR THE STEERING AND BRAKING SYSTEMS. COMPLETE LOSS OF STEERING OR BRAKING WILL NOT OCCUR SINCE BOTH SYSTEMS WOULD REVERT TO MANUAL OPERATION.

Remedy: THE DEALER WILL INSTALL A HYDRO-BOOST FLUID RETURN HOSE CONSTRUCTED FORM THE PROPER MATERIAL, POSITIONING THE HOSE ASSEMBLY TO ENSURE ADEQUATE CLEARANCE BETWEEN IT AND THE FRAME SIDE RAIL.

NHTSA campaign record ↗