2018 Bentley MULSANNE: complaints, problems and recalls
Explore the records behind recurring owner reports.
Key facts
0 owner complaints analyzed
2 distinct recall campaigns
Not available median reported failure mileage
Scope: 2018 model year. Data snapshot: . 0 complaints include usable failure mileage.
Most common problems
No owner complaints are recorded for this selection. A complaint can name multiple components.
Component breakdown
Number of unique complaints naming each component. Top eight shown.
No usable records for this chart.
| Category | Count |
|---|
No records.
Reported problems by failure mileage
Complaint counts in mileage bands. These are not failure rates per vehicle or mile.
| Category | Count |
|---|---|
| Under 25,000 | 0 |
| 25,000 to 49,999 | 0 |
| 50,000 to 74,999 | 0 |
| 75,000 to 99,999 | 0 |
| 100,000 to 149,999 | 0 |
| 150,000 and above | 0 |
Under 25,000: 0; 25,000 to 49,999: 0; 50,000 to 74,999: 0; 75,000 to 99,999: 0; 100,000 to 149,999: 0; 150,000 and above: 0
No usable failure mileage is recorded. 0 complaints have missing, zero or invalid mileage.
Complaints over time
Year the complaint was filed, not the vehicle model year or incident year. The snapshot year is partial.
No usable records for this chart.
| Category | Count |
|---|
No records.
Pattern summary
There is not enough complaint evidence to summarize patterns.
Calculated from recorded counts. An AI narrative has not been published for this selection.
Examples from the source records
Examples provide context, not a representative sample or a verified diagnosis.
Recall history
2 distinct campaigns affect this selection. Announcement dates below are different from vehicle model years. A campaign may cover multiple years.
18V632000 · Back Over Prevention: Sensing System: Camera
Reported: 2018-09-14 (September 14, 2018)
Bentley Motors, Inc. (Bentley) is recalling certain 2018 Bentley Mulsanne and 2018 Bentayga vehicles. When reverse gear has been selected, the rearview camera display may be obstructed or may not be fully visible within two seconds. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 111, "Rearview Mirrors."
Consequence: If the full camera view is obstructed or delayed and the driver does not check their surroundings before backing up, there may be an increased risk of a crash.
Remedy: Bentley will notify owners, and dealers will reprogram the software in the infotainment system, free of charge. The recall began October 19, 2018. Owners may contact Bentley customer service at 1-800-777-6923. Bentley's number for this recall is RE 18/11.
NHTSA campaign record ↗19V033000 · Seat Belts:Rear/Other
Reported: 2019-01-15 (January 15, 2019)
Bentley Motors, Inc. (Bentley) is recalling certain 2012-2018 Bentley Mulsanne vehicles. In the event of a crash, the rear seat belt anchor may detach from the vehicle. As such, these vehicles fail to comply to Federal Motor Vehicle Safety Standard (FMVSS) number 210, "Seat Belt Assembly Anchorages."
Consequence: In the event of a crash, if the rear seat belt buckle detaches, the seat occupant would have an increased risk of injury.
Remedy: Bentley will notify owners, and dealers will improve the strength of the rear seat belt mounting by adding an additional reinforcement panel to the body structure, free of charge. The recall began March 7, 2019. Owners may contact Bentley Customer Service at 1-800-777-6923. Bentley's number for this recall is RE 19/01.
NHTSA campaign record ↗