2008 Altec AT235P: complaints, problems and recalls
Explore the records behind recurring owner reports.
Key facts
0 owner complaints analyzed
2 distinct recall campaigns
Not available median reported failure mileage
Scope: 2008 model year. Data snapshot: . 0 complaints include usable failure mileage.
Most common problems
No owner complaints are recorded for this selection. A complaint can name multiple components.
Component breakdown
Number of unique complaints naming each component. Top eight shown.
No usable records for this chart.
| Category | Count |
|---|
No records.
Reported problems by failure mileage
Complaint counts in mileage bands. These are not failure rates per vehicle or mile.
| Category | Count |
|---|---|
| Under 25,000 | 0 |
| 25,000 to 49,999 | 0 |
| 50,000 to 74,999 | 0 |
| 75,000 to 99,999 | 0 |
| 100,000 to 149,999 | 0 |
| 150,000 and above | 0 |
Under 25,000: 0; 25,000 to 49,999: 0; 50,000 to 74,999: 0; 75,000 to 99,999: 0; 100,000 to 149,999: 0; 150,000 and above: 0
No usable failure mileage is recorded. 0 complaints have missing, zero or invalid mileage.
Complaints over time
Year the complaint was filed, not the vehicle model year or incident year. The snapshot year is partial.
No usable records for this chart.
| Category | Count |
|---|
No records.
Pattern summary
There is not enough complaint evidence to summarize patterns.
Calculated from recorded counts. An AI narrative has not been published for this selection.
Examples from the source records
Examples provide context, not a representative sample or a verified diagnosis.
Recall history
2 distinct campaigns affect this selection. Announcement dates below are different from vehicle model years. A campaign may cover multiple years.
10V399000 · Steering:Hydraulic Power Assist:Hose, Piping, And Connections
Reported: 2010-09-02 (September 2, 2010)
ALTEC IS RECALLING CERTAIN MODEL YEAR 2006-2007 AT200A, AT235, MODEL YEAR 2007-2010 AT235P AND MODEL YEAR 2008 AT3XG TRUCKS BUILT ON GM CHASSIS. THERE IS A POTENTIAL HYDRAULIC HOSE ROUTING CONDITION IN THE ENGINE COMPARTMENT. THE HOSE COULD CONTACT AND CAUSE SOME ABRASIONS TO AN OEM 12V CHASSIS WIRE OR POSSIBLY RUB ON THE STEEL POWER STEERING LINE WHICH MAY LEAD TO POSSIBLE DAMAGE OF THE HYDRAULIC LINE.
Consequence: THIS COULD RESULT IN A BURST HYDRAULIC HOSE DAMAGE WIRING, OR A FIRE.
Remedy: ALTEC WILL PROVIDE INSTRUCTIONS TO DEALERS ON HOW TO INSPECT AND INSTALL THE NEW BRACKET FREE OF CHARGE. THIS SERVICE WILL BE PERFORMED FREE OF CHARGE. THE SAFETY RECALL BEGAN ON SEPTEMBER 15, 2010. OWNERS MAY CONTACT ALTEC AT 1-877-462-5832.
NHTSA campaign record ↗11V197000 · Equipment
Reported: 2011-03-28 (March 28, 2011)
ALTEC IS RECALLING CERTAIN AT35-G, AT37-G, AT235, AND AT237 AERIAL DEVICES MANUFACTURED FROM JANUARY 2005 THROUGH OCTOBER 2008. THESE UNITS ARE EQUIPPED WITH BILLET STEEL COUNTERWEIGHT THAT IS WELDED IN PLACE. IN THE EVENT OF WELD FAILURE, THE COUNTERWEIGHT MAY FALL OUT WHILE TRAVELLING.
Consequence: IF THESE STEEL PIECES FALL IN THE PATH OF THE VEHICLE OR OTHER TRAFFIC, A VEHICLE CRASH INVOLVING DEATH OR SERIOUS INJURY MAY RESULT.
Remedy: ALTEC HAS DEVELOPED KITS TO IMPROVE THE ATTACHMENT OF THE BILLET STEEL COUNTERWEIGHTS. CUSTOMERS AT THEIR OPTION MAY PERFORM THE REPAIR OR HAVE A DEALER INSTALL THE KIT FREE OF CHARGE. THE SAFETY RECALL IS EXPECTED TO BEGIN DURING APRIL 2011. OWNERS MAY CONTACT ALTEC AT 1-877-462-5832.
NHTSA campaign record ↗