Terex HR40 recalls by model year
Explore the records behind recurring owner reports.
Key facts
0 owner complaints analyzed
4 distinct recall campaigns
Not available median reported failure mileage
Scope: 1999 to 2025 model years. Data snapshot: . 0 complaints include usable failure mileage.
Recalls by model year
All campaigns in the snapshot affecting each model year, including recalls announced years later.
Recall campaigns
Shared campaigns appear once in each affected model year.
| Category | Count |
|---|---|
| 2009 | 1 |
| 2010 | 1 |
| 2011 | 1 |
| 2012 | 1 |
| 2013 | 1 |
| 2025 | 1 |
2009: 1; 2010: 1; 2011: 1; 2012: 1; 2013: 1; 2025: 1
Year-by-year records
Recall history
4 distinct campaigns affect this selection. Announcement dates below are different from vehicle model years. A campaign may cover multiple years.
09V168000 · Equipment
Reported: 2009-05-19 (May 19, 2009) · Model years: 1999, 2000, 2001
TEREX TELELECT, INC. IS RECALLING 192 MY 1999 THROUGH 2001 HR37 AND HR40 UTILITY TRUCKS MANUFACTURED FROM JUNE 21, 1999 THROUGH JANUARY 30, 2001, WHICH UTILIZE HYDRAULIC CYLINDER 437250D TO LIFT THE LOWER BOOM ASSEMBLY. THESE UNITS WERE BUILT WITH ROD EYE MATERIAL THAT WAS NOT TO SPECIFICATION IN THE LIFT CYLINDER.
Consequence: THE ROD EYE MATERIAL MAY FAIL AND ALLOW THE BOOM AND PLATFORM TO FALL, POSSIBLY RESULTING IN SERIOUS INJURY OR DEATH TO THE OPERATOR OR PERSONS NEAR THE VEHICLE.
Remedy: TEREX WILL NOTIFY OWNERS AND REPLACE THE LOWER BOOM LIFT CYLINDER FREE OF CHARGE. THE SAFETY RECALL BEGAN ON MAY 29, 2009. OWNERS MAY CONTACT TEREX UTILITIES WARRANTY DEPARTMENT BY CALLING 1-605-884-3892.
NHTSA campaign record ↗11V418000 · Equipment
Reported: 2011-08-08 (August 8, 2011) · Model years: 2000, 2001
TEREX IS RECALLING CERTAIN MODEL YEAR 2000 AND 2001 HR37M AND HR40M UTILITY TRUCKS MANUFACTURED FROM NOVEMBER 2000 THROUGH DECEMBER 2001. THE AERIAL DEVICES INSTALLED ON THESE TRUCKS MAY CONTAIN A LOWER BOOM LIFT CYLINDER WITH DEFECTIVE COMPONENTS. THE MATERIAL USED TO PRODUCE THE CYLINDER ROD ENDS WAS NOT TO SPECIFICATIONS.
Consequence: THE CYLINDER ROD ENDS MAY CRACK CAUSING THE CYLINDER TO DISCONNECT WHILE IN USE. PERSONAL INJURY OR DEATH CAN OCCUR TO THE USER OR TO PERSONS AROUND THE VEHICLE.
Remedy: TEREX WILL NOTIFY OWNERS, AND DEALERS WILL INSPECT THE CYLINDER ROD ENDS FOR CRACKS. DEALERS WILL ALSO TEST THE CYLINDER MATERIAL FOR HARDNESS. THE SAFETY RECALL BEGAN ON AUGUST 30, 2011. OWNERS MAY CONTACT TEREX UTILITIES WARRANTY DEPARTMENT BY CALLING 1-605-884-3892 OR EMAIL TO UTILITIES.WARRANTY@TEREX.COM.
NHTSA campaign record ↗14V371000 · Equipment
Reported: 2014-06-26 (June 26, 2014) · Model years: 2009, 2010, 2011, 2012, 2013
Terex South Dakota, Inc. (Terex) is recalling certain model year 2009-2013 LT38, LT40, LTM40, NT29, TL37, HR40, L13i, and TPL40 aerial devices manufactured on 2009-2013 Ford F-350, F-450, or F-550 Super Duty chassis with a 6.8L engine, and equipped with certain Muncie Power Products PTO Assemblies. In the affected vehicles, oil may leak from the PTO pressure switch onto a thermal blanket covering the exhaust.
Consequence: The leaking oil may soak into the thermal blanket covering the exhaust, which when combined with heat from exhaust, may result in an increased risk of fire.
Remedy: Terex will notify owners, and dealers will install a new pressure switch kit that moves the switch away from the exhaust system, free of charge. The recall began in September 15, 2014. Owners may contact Terex customer service at 1-605-882-4000. Terex's number for this recall is SN611.
NHTSA campaign record ↗26V006000 · Equipment:Mechanical:Boom/Crane/Ladder:Motor/Hydraulic Pump
Reported: 2026-01-12 (January 12, 2026) · Model years: 2025
Terex South Dakota, Inc. (Terex) is recalling certain 2025 TL-Series, LT-Series, LTM40, HR40, HR46, and SCM55 areal device vehicles. The control valve may have been assembled with an incorrect plug, causing the hydraulic equipment to overheat.
Consequence: Touching parts of the overheated hydraulic equipment can increase the risk of burn injuries.
Remedy: Dealers will inspect and repair the control valve as necessary, free of charge. Owner notification letters were mailed January 23, 2026. Owners may contact Terex's customer service at 1-605-882-4000. Terex's number for this recall is SN735.
NHTSA campaign record ↗