Terex Advance MIXER FD6000B recalls by model year
Explore the records behind recurring owner reports.
Key facts
0 owner complaints analyzed
2 distinct recall campaigns
Not available median reported failure mileage
Scope: 2011 to 2016 model years. Data snapshot: . 0 complaints include usable failure mileage.
Recalls by model year
All campaigns in the snapshot affecting each model year, including recalls announced years later.
Recall campaigns
Shared campaigns appear once in each affected model year.
| Category | Count |
|---|---|
| 2011 | 1 |
| 2012 | 1 |
| 2013 | 1 |
| 2014 | 1 |
| 2015 | 2 |
| 2016 | 1 |
2011: 1; 2012: 1; 2013: 1; 2014: 1; 2015: 2; 2016: 1
Year-by-year records
Recall history
2 distinct campaigns affect this selection. Announcement dates below are different from vehicle model years. A campaign may cover multiple years.
15V703000 · Steering
Reported: 2015-10-26 (October 26, 2015) · Model years: 2011, 2012, 2013, 2014, 2015
Terex Advance (Terex) is recalling certain model year 2011-2015 FD4000B, FD5000D, FD6000B, and FD7000B concrete mixers manufactured January 1, 2011, to September 1, 2015. The affected vehicles have steerable tag axles operated by Eaton Hydraulics S26 Gear Pumps. These gear pumps may unexpectedly fail, reducing the ability to properly steer the vehicle.
Consequence: The loss of steering ability may increase the risk of a crash.
Remedy: Terex will notify owners, and dealers will replace the S26 gear pumps, free of charge. The recall began on December 22, 2015. Owners may contact Terex customer service at 1-800-433-6691.
NHTSA campaign record ↗16V371000 · Power Train:Axle Assembly
Reported: 2016-05-26 (May 26, 2016) · Model years: 2015, 2016
Terex Advance (Terex) is recalling certain model year 2015-2016 Mixer FD3000, FD4000, and FD6000B vehicles manufactured August 1, 2014, to September 30, 2015, and equipped with drive axles manufactured by Marmon-Herrington. The affected axles may have hex nuts on the flange yoke that may not have been properly tightened.
Consequence: If the hex nuts are not tightened to specification, the driveshaft may disconnect from the drive axle, resulting in a loss of propulsion and increasing the risk of a crash.
Remedy: Terex will notify owners and provide instructions to properly torque the bolts. The recall began on July 15, 2016. Owners may contact Terex customer service at 1-800-433-6691.
NHTSA campaign record ↗