vehicle signal
U.S. public vehicle records

Terex Advance FRONT DISCHARGE CONCRETE recalls by model year

Explore the records behind recurring owner reports.

Key facts

0 owner complaints analyzed

7 distinct recall campaigns

Not available median reported failure mileage

Scope: 2013 to 2019 model years. Data snapshot: . 0 complaints include usable failure mileage.

Compare model years

Recalls by model year

All campaigns in the snapshot affecting each model year, including recalls announced years later.

Recall campaigns

Shared campaigns appear once in each affected model year.

2013
1
2014
1
2015
2
2016
3
2017
2
2018
1
2019
1
Recall campaigns data
CategoryCount
20131
20141
20152
20163
20172
20181
20191

2013: 1; 2014: 1; 2015: 2; 2016: 3; 2017: 2; 2018: 1; 2019: 1

Year-by-year records

Terex Advance FRONT DISCHARGE CONCRETE model-year comparison
Model yearComplaintsRecallsChange in recalls
201301Not available
2014010
201502+1
201603+1
201702-1
201801-1
2019010

Recall history

7 distinct campaigns affect this selection. Announcement dates below are different from vehicle model years. A campaign may cover multiple years.

14V793000 · Suspension:Front:Springs:Leaf Spring Assembly

Reported: 2014-12-16 (December 16, 2014) · Model years: 2013, 2014, 2015

Terex Advance (Terex) is recalling certain model year 2013-2015 Front Discharge Concrete Mixer Trucks manufactured August 20, 2012, to December 5, 2014. Due to improperly secured castellated retaining nuts on the front axle leaf spring rear pin and the steering system, the rear end of the front axle leaf spring may partially disconnect from the front suspension hanger.

Consequence: If the front axle spring becomes partially disconnected from the front suspension hanger, steering difficulty may result, increasing the risk of a crash.

Remedy: Terex will notify owners, and dealers will inspect and correct the retaining nut installation, as necessary, free of charge. The recall began on May 15, 2015. Owners may contact Terex customer service at 1-800-433-6691.

NHTSA campaign record ↗
15V423000 · Equipment

Reported: 2015-07-02 (July 2, 2015) · Model years: 2015

Terex Advance (Terex) is recalling certain model year 2015 Front Discharge Concrete Mixer Trucks manufactured April 1, 2015, to June 23, 2015. In the affected trucks, the bolts that secure the concrete mixing drum to the drum drive plate may not have been properly tightened.

Consequence: If the bolts are not properly tightened, the drum may separate from the vehicle, increasing the risk of injury or a crash.

Remedy: Terex will notify owners, and dealers will install new bolts using a thread locker, after removing the paint from under the fasteners. These repairs will be done free of charge. The recall began on Sptember 23, 2015. Owners may contact Terex customer service at 1-800-433-6691.

NHTSA campaign record ↗
16V388000 · Engine And Engine Cooling:Engine:Diesel

Reported: 2016-06-01 (June 1, 2016) · Model years: 2016

Terex Advance (Terex) is recalling certain model year 2016 Front Discharge Mixer trucks manufactured March 31, 2016, to May 9, 2016 equipped with a Cummins ISX12 or ISX15 engine using certain engine control modules (ECM). These ECM's may experience an internal electrical short that can cause a fuse to blow, resulting in an unexpected engine stall without the ability to restart the engine.

Consequence: An engine stall can increase the risk of a crash.

Remedy: Cummins will notify owners, and dealers will replace the existing ECM with a new ECM, free of charge. The recall began on July 8, 2016. Owners may contact Cummins customer service at 1-800-343-7357 or Terex customer service at 1-800-433-6691.

NHTSA campaign record ↗
16V413000 · Equipment

Reported: 2016-06-08 (June 8, 2016) · Model years: 2016

Terex Advance (Terex) is recalling certain model year 2016 Front Discharge Concrete Mixer trucks manufactured January 14, 2016, to May 31, 2016. The weld on the outer chute race may fail causing the main chute to detach and fall off while the vehicle is in motion.

Consequence: If the main chute detaches while the vehicle is being driven there would be an increased risk of a crash.

Remedy: Terex has notified the affected owners, and dealers will replace the main chute race assembly, free of charge. The recall began on June 13, 2016. Owners may contact Terex customer service at 1-800-678-5961. Terex's number for this recall is Construction_000278.

NHTSA campaign record ↗
16V806000 · Suspension:Front:King Pin | Steering

Reported: 2016-11-07 (November 7, 2016) · Model years: 2016, 2017

Terex Advance Mixer, Inc. (Terex) is recalling certain model year 2016-2017 Front Discharge Mixers manufactured July 1, 2016, to September 30, 2016, equipped with certain Meritor front drive steer axles. These front axles have a king-pin that may fracture and possibly result in wheel end separation.

Consequence: If the wheel end separates, a loss of vehicle control may result, increasing the risk of a crash.

Remedy: Terex will notify owners, and dealers will replace all of the affected lower king-pins, free of charge. The recall began on January 5, 2017. Owners may contact Terex customer service at 1-800-678-5961.

NHTSA campaign record ↗
17V353000 · Equipment

Reported: 2017-05-31 (May 31, 2017) · Model years: 2017

Terex Advance Mixer, Inc. (Terex) is recalling certain 2017 Front Discharge Mixers, equipped with certain 250 gallon water tanks. The welds that attach the filler neck onto the 250 gallon pressurized water tank may fail.

Consequence: If the weld fails, the filler neck may separate from the pressurized tank, increasing the risk of injury.

Remedy: Terex will replace the affected water tanks, free of charge. The recall began on July 25, 2017. Owners may contact Terex customer service at 1-800-678-5961.

NHTSA campaign record ↗
19V152000 · Service Brakes, Air:Disc:Caliper

Reported: 2019-03-01 (March 1, 2019) · Model years: 2018, 2019

Terex Advance Mixer, Inc is recalling certain 2018-2019 Front Discharge Concrete Mixer Trucks equipped with Meritor EX225 disc brake calipers. The drive pins, a component with the axle sub-assembly, may have been cracked during assembly, possibly resulting in the pins fully fracturing.

Consequence: If the drive pin becomes fully fractured, the vehicle may pull to one side while braking, causing a loss of vehicle control and increasing the risk of crash.

Remedy: Terex will notify owners and Meritor dealers will inspect and replace the brake calipers, free of charge. The recall began April 23, 2019. Owners may contact Terex Advance customer service at 1-605-882-4000.

NHTSA campaign record ↗