Safari Coach SIMBA recalls by model year

Reported: 2005-03-01 (March 1, 2005) · Model years: 2004, 2005

ON CERTAIN CLASS A MOTOR HOMES BUILT ON WORKHORSE CHASSIS,THE BATTERY CABLES MAY NOT BE SECURED PROPERLY INSIDE OF THE CHASSIS' FRAME RAIL. THE BATTERY CABLES MAY BE LOCATED TOO NEAR THE ENGINE EXHAUST.

Consequence: THIS COULD POTENTIALLY MELT THE BATTERY CABLE AND CAUSE A BACK FEED THROUGH THE CHASSIS 12V SYSTEM WHICH COULD RESULT IN INJURY OR LOSS.

Remedy: DEALERS WILL INSPECT THE BATTERY CABLE TO SEE IF THE CABLE IS PROPERLY MOUNTED INSIDE OF THE CHASSIS FRAME RAIL. IF NECESSARY, THE BATTERY CABLE WILL BE MOUNTED SECURELY IN EXISTING HOLES IN FRAME RAIL FREE OF CHARGE. THE RECALL BEGAN ON MARCH 18, 2005. OWNERS MAY CONTACT MONACO AT 1-800-685-6545.

Reported: 2006-06-23 (June 23, 2006) · Model years: 2004, 2005

CERTAIN MOTOR HOMES BUILT ON WORKHORSE CHASSIS AND EQUIPPED WITH ACTIA CORPORATE INSTRUMENT CLUSTER FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 101, 'CONTROLS AND DISPLAYS,' AND NO. 105, 'HYDRAULIC AND ELECTRIC BRAKE SYSTEMS.' IF THE BRAKE FAIL INPUT FALLS BELOW A VOLTAGE OF 1.5V, THE BRAKE FAILURE LAMP AND ALARM WILL BE ACTIVATED. ALSO ACTIVATION OF THE ABS TELLTALE WHEN THE ABS IS NOT PROPERLY FUNCTIONING DOES NOT ALWAYS OCCUR.

Consequence: AT NIGHT THE INSTRUMENT CLUSTER LIGHTS MAY FAIL AND THE DRIVER MAY NOT BE ABLE TO SEE THE INSTRUMENT PANEL GAUGES AND THE BRAKE WARNING LIGHT INDICATOR WHICH COULD INCREASING THE RISK OF A CRASH.

Remedy: WORKHORSE IS CONDUCTING THIS RECALL (PLEASE SEE 04V195000) AND WILL REPROGRAM THE INSTRUMENT PANEL CLUSTER FREE OF CHARGE. OWNERS MAY CONTACT WORKHORSE AT 1-877-246-7731 OR MONACO AT 1-800-685-6545.

Reported: 2006-09-19 (September 19, 2006) · Model years: 2004, 2005, 2006, 2007

ON CERTAIN MOTOR HOMES BUILT ON WORKHORSE CHASSIS AND EQUIPPED WITH GM 8.1L V8 ENGINES, IMPROPER HARDENING DURING THE HEAT TREATMENT PROCESS CAN CAUSE THE FUEL RAIL PULSE DAMPER RETAINER CLIP TO FRACTURE, RESULTING IN INADEQUATE RETENTION OF THE DAMPER. IF THE DAMPER BECOMES LOOSE, FUEL COULD BE PUMPED BY THE FUEL PUMP INTO THE UNDER HOOD AREA.

Consequence: IN THE PRESENCE OF AN IGNITION SOURCE, A FIRE COULD RESULT.

Remedy: WORKHORSE IS HANDLING THE OWNER NOTIFICATION AND REMEDY FOR THIS CAMPAIGN (PLEASE SEE 06V225). DEALERS WILL REPLACE THE FUEL RAIL PULSE DAMPER RETAINER CLIPS ON THESE ENGINES FREE OF CHARGE. OWNERS MAY CONTACT WORKHORSE AT 877-294-6773 OR MONACO AT 1-800-685-6545.

Reported: 2006-06-22 (June 22, 2006) · Model years: 2006

CERTAIN MOTOR HOME CHASSIS BUILT ON WORKHORSE CHASSIS MAY HAVE BEEN EQUIPPED WITH INCORRECT STEERING INTERMEDIATE SHAFTS. THE SPLINE CAN STRIP WHILE THE STEERING WHEEL IS BEING TURNED.

Consequence: THIS STEERING CONDITION COULD RESULT IN A LOSS OF STEERING CONTROL, INCREASING THE RISK OF A CRASH.

Remedy: WORKHORSE IS CONDUCTING THIS RECALL (PLEASE SEE 06V148000) AND WILL INSPECT AND, IF NECESSARY, REPLACE THE STEERING INTERMEDIATE SHAFT. OWNERS MAY CONTACT WORKHORSE AT 1-877-294-6773 OR MONACO AT 1-800-685-6545.

Reported: 2008-11-03 (November 3, 2008) · Model years: 2006

MONACO IS RECALLING 202 MY 2006 MONARCH SE, MY 2009 RIPTIDE, MY 2006 HOLIDAY RAMBLER ADMIRAL SE, MY 2007-2009 ARISTA, MY 2007-2009 SAFARI PASSAGE, MY 2006 SIMBA AND TREK GAS, AND MY 2006-2007 R-VISION TRAIL-LITE AND TRAIL-AIRE MOTOR HOMES BUILT ON WORKHORSE CHASSIS. THE CASTLE NUT THAT RETAINS THE STEERING DRAG LINK TO THE PITMAN ARM MAY HAVE BEEN IMPROPERLY TORQUED DURING ASSEMBLY. THE IMPROPER TORQUE MAY HAVE DAMAGED THE CASTLE NUT AND COMPROMISED THE INTEGRITY OF THE CONNECTION.

Consequence: IF THE DRAG LINK WERE TO SEPARATE FROM THE PITMAN ARM, THE DRIVER WOULD NOT HAVE DIRECTIONAL CONTROL OF THE VEHICLE POSSIBLY CAUSING A CRASH.

Remedy: MONACO IS WORKING WITH WORKHORSE TO REPLACE AND PROPERLY TIGHTEN THE CASTLE NUT THAT RETAINS THE STEERING DRAG LINK TO THE PITMAN ARM (PLEASE SEE 08V442). OWNERS MAY CONTACT WORKHORSE AT 1-877-946-7731 OR MONACO AT 1-800-685-6545.

Reported: 2007-01-24 (January 24, 2007) · Model years: 2007

ON CERTAIN MOTOR HOMES, AN INCORRECT SCREW WAS USED TO INSTALL THE BLACK AND WHITE CRT BACK-UP MONITOR IN THE DASH. THE INCORRECT SCREWS ARE 1/4" LONGER THAN SPECIFIED AND MAY CONTACT A PC BOARD INSIDE THE MONITOR WHICH COULD POTENTIALLY HIT A HIGH VOLTAGE CIRCUIT ON THE PC BOARD OF APPROXIMATELY 10,000-13,000 VOLTS.

Consequence: IF THE SCREW MAKES CONTACT WITH THE HIGH VOLTAGE TRACER ON THE PC BOARD AND SOMEONE WOULD TOUCH THE SCREW HEAD WHILE THE POWER IS ON, AN ELECTRICAL SHOCK COULD OCCUR CAUSING INJURY.

Remedy: DEALERS WILL INSPECT THE BACK-UP MONITOR TO VERIFY THE OPERATION OF THE MONITOR FREE OF CHARGE. IF THE MONITOR IS OPERATING PROPERLY, THE REPAIR WILL CONSIST OF REPLACING THE INCORRECT SCREW WITH THE SPECIFIED SCREW AND TESTING FOR PROPER OPERATION. IF THE MONITOR IS NOT OPERATING PROPERLY ON INITIAL INSPECTION, THE MONITOR WILL BE REPLACED USING THE CORRECT SCREW. THE RECALL BEGAN ON FEBRUARY 9, 2007. OWNERS MAY CONTACT MONACO AT 877-332-9239.