International TRANSTAR recalls by model year

Reported: 2017-12-11 (December 11, 2017) · Model years: 2001, 2002, 2003

Navistar, Inc. (Navistar) is recalling certain 2000-2001 International 4700, 2000-2002 4900, 2001-2003 8100 (TranStar) and 9100I, 2002-2003, 2005, 2007-2009, 2012-2014 and 2016-2018 DuraStar, 2012 and 2014-2017 ProStar, 2014-2015 TerraStar, and 2018 LT trucks. These vehicles are equipped with Kidde Plastic-Handle or Push Button 'Pindicator' fire extinguishers that may become clogged, preventing the extinguisher from discharging as expected or excessive force may be needed to activate the extinguisher. Additionally, in certain models, the nozzle may detach from the valve assembly with enough force that it could cause injury and also render the product inoperable. For a full list of the affected fire extinguisher models visit: https://static.nhtsa.gov/odi/rcl/2017/RMISC-17E062-5427.pdf

Consequence: In the event of a fire, if the fire extinguisher does not function properly, it can increase the risk of injury.

Remedy: Navistar will notify owners, instructing them to notify Kidde for a replacement fire extinguisher, free of charge. The recall is expected to begin February 9, 2018. Owners may contact Navistar customer service at 1-331-332-1590, or contact Kidde customer service toll-free at 1-855-262-3540, or online at www.kidde.com and click on "Product Safety Recall" for more information.

Reported: 2013-09-18 (September 18, 2013) · Model years: 2008, 2009, 2010, 2011, 2012, 2013

Navistar, Inc. is recalling certain model year 2008-2013 International LoneStar, ProStar, and TranStar trucks manufactured February 20, 2008, through July 29, 2013 and equipped with an electronic fifth wheel jaw release system (feature code 0595BAW or 0595BAY). Due to an assembly error, the air lines at the isolation/vent valve may not be oriented correctly.

Consequence: Because of the improper orientation, in the event of an air leakage at the isolation/vent valve, the 5th wheel jaw may release, unexpectedly releasing the trailer from the tractor, increasing the risk of a vehicle crash.

Remedy: Navistar will notify owners, and dealers will inspect the air line routing. If necessary, the air line routing will be corrected free of charge. The recall began on October 10, 2013. Owners may contact Navistar at 1-331-332-1590. Navistar's recall number is 13514.

Reported: 2011-08-17 (August 17, 2011) · Model years: 2010, 2011, 2012

NAVISTAR IS RECALLING CERTAIN MODEL YEAR 2010-2012 PAYSTAR, WORKSTAR, TRANSTAR, AND PROSTAR COMMERCIAL TRUCKS MANUFACTURED FROM JUNE 1, 2009, THROUGH MAY 31, 2011, EQUIPPED WITH A MAXXFORCE 11 OR 13 ENGINE (FEATURE CODE 12UXJ OR 12UXH) AND WITH ALTERNATOR FEATURE CODE 08GGN, 08GGR, 08 GHG, OR 08GHH. THE ALTERNATOR CABLE MAY RUB ON THE HIGH PRESSURE POWER STEERING HOSE, POSSIBLY CHAFING ITS INSULATION AND CAUSING AN ELECTRICAL SHORT.

Consequence: AN ELECTRICAL SHORT MAY CAUSE A VEHICLE FIRE POSSIBLY RESULTING IN PROPERTY DAMAGE, PERSONAL INJURY, OR DEATH.

Remedy: NAVISTAR WILL INSTALL A BRACKET TO ROUTE THE WIRES AWAY FROM THE POWER STEERING HOSE. NAVISTAR DID NOT PROVIDE AN EXPECTED START DATE FOR THE RECALL, BUT AN INTERIM NOTICE WILL BE MAILED TO OWNERS IF PARTS WILL NOT BE AVAILABLE UNTIL AFTER OCTOBER 14, 2011. OWNERS MAY CONTACT NAVISTAR AT 1-800-448-7825. THIS RECALL CAMPAIGN HAS BEEN SUPERSEDED BY 12V-196.

Reported: 2012-05-02 (May 2, 2012) · Model years: 2010, 2011, 2012, 2013

NAVISTAR IS RECALLING CERTAIN MODEL YEAR 2010 THROUGH 2013 PAYSTAR, WORKSTAR, TRANSTAR, AND PROSTAR, AND MODEL YEAR 2012 AND 2013 LONESTAR COMMERCIAL TRUCKS MANUFACTURED FROM JUNE 1, 2009, THROUGH APRIL 4, 2012, EQUIPPED WITH A MAXXFORCE 11 OR 13 ENGINE (FEATURE CODE 12UXJ OR 12UXH) AND WITH BOSCH ALTERNATOR FEATURE CODES 08GGN, 08GGR, 08GHG, OR 08GHH. THE ALTERNATOR CABLE MAY RUB ON THE HIGH PRESSURE POWER STEERING HOSE, POSSIBLY CHAFING ITS INSULATION AND CAUSING AN ELECTRICAL SHORT.

Consequence: AN ELECTRICAL SHORT MAY CAUSE A VEHICLE FIRE POSSIBLY RESULTING IN PROPERTY DAMAGE, PERSONAL INJURY, OR DEATH.

Remedy: NAVISTAR WILL INSTALL A STANDOFF BRACKET AND IMPROVE HARNESS ROUTING TO BETTER ROUTE THE ALTERNATOR WIRES AWAY FROM THE POWER STEERING HOSE. THE SAFETY RECALL BEGAN ON JULY 16, 2012. OWNERS MAY CONTACT NAVISTAR AT 1-800-448-7825.

Reported: 2011-04-19 (April 19, 2011) · Model years: 2011, 2012

NAVISTAR IS RECALL CERTAIN MODEL YEAR 2011 AND 2012 INTERNATIONAL DURASTAR, PAYSTAR, WORKSTAR, TRANSTAR, LONESTAR AND PROSTAR COMMERCIAL TRUCKS MANUFACTURED FROM NOVEMBER 5, 2010, THROUGH MARCH 10, 2011, FOR FAILING TO COMPLY WITH FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 121, "AIR BRAKE SYSTEMS (ABS)." THE TRAILER ABS FAULT INDICATOR LAMP IN THE INSTRUMENT CLUSTER WILL NOT ILLUMINATE DUE TO A PROGRAMMING OR HARDWARE ISSUE WITH THE BRAKE SYSTEM ELECTRONIC CONTROL UNIT.

Consequence: AN INOPERABLE TRAILER ABS FAULT INDICATOR MAY PREVENT THE DRIVER FROM BEING AWARE OF A TRAILER ABS FAULT CONDITION THEREBY POSSIBLY INCREASING THE RISK OF A CRASH POTENTIALLY RESULTING IN PROPERTY DAMAGE, PERSONAL INJURY, OR DEATH.

Remedy: NAVISTAR WILL NOTIFY OWNERS. DEALERS WILL REPROGRAM OR REPLACE THE BRAKE SYSTEM ELECTRONIC CONTROL UNIT FREE OF CHARGE. THE SAFETY RECALL BEGAN ON MAY 12, 2011. OWNERS MAY CONTACT NAVISTAR AT 1-800-448-7825.

Reported: 2012-02-13 (February 13, 2012) · Model years: 2011, 2012, 2013

NAVISTAR IS RECALLING CERTAIN MODEL YEAR 2012-2013 IC BUS CE-C, HC, AND INTERNATIONAL 9400 AND CERTAIN MODEL YEAR 2011 THROUGH 2013 INTERNATIONAL DURASTAR, PAYSTAR, WORKSTAR, TRANSTAR, LONESTAR, PROSTAR, 9200, AND 9800, AND CERTAIN MODEL YEAR 2013 INTERNATIONAL 9900, VEHICLES, MANUFACTURED FROM DECEMBER 2, 2010, THROUGH JANUARY 26, 2012, AND EQUIPPED WITH BENDIX ATR-6 TRACTION RELAY VALVES. IN EXTREMELY COLD CONDITIONS, THESE BENDIX RELAY VALVES MAY POTENTIALLY DEVELOP INTERNAL LEAKAGE. INTERNAL LEAKAGE CAN LEAD TO AIR PRESSURE BEING DELIVERED TO AFFECTED PRIMARY OR SECONDARY BRAKES CAUSING CONTINUOUS BRAKE APPLICATION.

Consequence: UNEXPECTED CONTINUOUS BRAKE APPLICATION CAN CAUSE THE BRAKES TO OVERHEAT AND LEAD TO A FIRE. UNEXPECTED CONTINUOUS BRAKE APPLICATION CAN CAUSE THE DRIVER TO LOSE CONTROL OF THE VEHICLE, INCREASING THE RISK OF A CRASH. ALSO, THE BRAKES MAY BE APPLIED WITHOUT ILLUMINATING THE BRAKE LIGHTS, FAILING TO GIVE PROPER WARNING TO OTHER DRIVERS.

Remedy: NAVISTAR WILL NOTIFY OWNERS, AND DEALERS WILL PROVIDE A TEMPORARY REPAIR UNTIL BENDIX DEVELOPS A PERMANENT REMEDY. THIS SERVICE WILL BE PERFORMED FREE OF CHARGE. THE SAFETY RECALL BEGAN ON APRIL 10, 2012. OWNERS MAY CONTACT NAVISTAR AT 1-800-448-7825.

Reported: 2012-08-14 (August 14, 2012) · Model years: 2011, 2012, 2013

Navistar is recalling certain model year 2011-2013 International vehicles manufactured from November 2, 2010 through May 25, 2012, equipped with Bendix air disc brakes. Bolts that fasten the air disc brake caliper to the caliper mounting plate may not have been tightended to their specified torque. This may cause the mouting bolts to become loose and possibly allow the air disc brake caliper to separate from the caliper mounting plate, resulting in an unexpected pull condition during braking application or an unexpected increase in stopping distance.

Consequence: An unexpected pull condition during braking application or an unexpected increase in stopping distance, increases the risk of a crash, leading to property damage, personal injury, or death.

Remedy: Navistar will notify owners, and dealers will replace any missing caliper mounting bolts and tighten caliper mounting bolts, free of charge. The safety recall began on October 30, 2012. Owners may contact Navistar at 1-331-332-1590.

Reported: 2013-04-17 (April 17, 2013) · Model years: 2011, 2012, 2013

Navistar is recalling certain model year 2011-2012 International Lonestar, model year 2012-2013 International Terrastar and model year 2011-2013 International DuraStar, ProStar, TranStar, and WorkStar commercial trucks manufactured from June 1, 2010, through March 7, 2012 and equipped with day cab codes 16CAB, 16030, or 16196 and feature codes 16WCE, 16WCR, 16XWD, 16XWE, 16XWV, 16XXB, 16XXD, 16XXE, 16XXG, or 16XYN sun shades. The sun shade may not be properly secured to the cab roof panel which may result in partial or full separation of the sun shade from the roof panel.

Consequence: If the sun shade separates from the cab roof during vehicle operation, the sudden release of the sun shade could distract the driver increasing the risk of a crash.

Remedy: Navistar will notify owners, and dealers will inspect and strengthen the sun shade mounting, free of charge. The safety recall began on September 10, 2013. Owners may contact Navistar at 1-800-448-7825. Navistar's campaign number is 13505.

Reported: 2015-04-22 (April 22, 2015) · Model years: 2011, 2012, 2013, 2014, 2015

Navistar, Inc. (Navistar) is recalling certain model year 2011-2015 International DuraStar, ProStar, TranStar and WorkStar, 2012-2015 International TerraStar, 2013-2015 International LoneStar and IC Bus HC, and 2014-2015 IC Bus AC vehicles. A vehicle double battery jump start or electrical load dump event could result in an overvoltage condition of a component within the HVAC system linear power module (LPM) which is used to control the blower speed. The overvoltage condition could result in the overheating and failure of the LPM.

Consequence: If the LPM overheats and fails, there is an increased risk of a fire.

Remedy: Navistar will notify owners, and dealers will replace the LPM with an upgraded one, free of charge. An interim letter was mailed to owners on June 18, 2015. A second notification will mailed when parts become available. The recall began on August 6, 2015. Owners may contact Navistar customer service at 1-800-448-7825. Navistar's number for this recall is 15509.

Reported: 2015-09-29 (September 29, 2015) · Model years: 2011, 2012, 2013

Navistar, Inc. (Navistar) is recalling certain model year 2011-2014 International ProStar trucks manufactured May 18, 2010, to April 5, 2013, 2012-2014 International LoneStar trucks manufactured September 7, 2011, to March 25, 2013, and 2011-2013 International TranStar trucks manufactured October 18, 2010, to February 20, 2013. The affected trucks are equipped with Fontaine Ultra LT Fifth Wheel connectors, which, due to cumulative damage to the fifth wheel and its locking mechanism, have a locking mechanism that may fail to operate or to properly engage.

Consequence: If the fifth wheel and locking mechanism are sufficiently damaged, the locking mechanism may fail to operate as intended and the trailer may unexpectedly detach from the tractor, increasing the risk of a crash.

Remedy: Navistar will notify owners, and Fontaine dealers will replace the fifth wheel with an Ultra NT model fifth wheel, free of charge. The recall began on November 18, 2015. Owners may contact Navistar customer service at 1-800-448-7825, or Fontaine customer service at 1-844-597-7393.

Reported: 2012-11-21 (November 21, 2012) · Model years: 2012, 2013

Navistar is recalling certain model year 2012-2013 International brand ProStar and TranStar commercial trucks, manufactured from August 01, 2011, through June 12, 2012, and equipped with front brake linings listed as feature codes 0504501 or 0504504. The brake S-Cam tube bracket assemblies on the steer axles may fracture.

Consequence: Brake assembly fractures may result in an inoperative brake on the affected wheel. This will cause the vehicle to pull to one side unexpectedly during breaking and/or increase the stopping distance. Either result may increase the risk of a vehicle crash.

Remedy: Navistar will notify owners, and dealers will replace S-Cam tube bracket assemblies free of charge. The safety recall is expected to begin by August 23, 2013. Owners may contact Navistar at 1-800-448-7825.

Reported: 2013-06-04 (June 4, 2013) · Model years: 2012, 2013

Navistar is recalling certain model year 2012-2013 International brand ProStar and TranStar commercial trucks, manufactured from August 01, 2011, through July 10, 2012, and equipped with front brake linings listed as feature codes 0504501, 0504504, or 04EWM. The brake S-Cam tube bracket assemblies on the steer axles may fracture.

Consequence: Brake assembly fractures may result in an inoperative brake on the affected wheel. This will cause the vehicle to pull to one side unexpectedly during breaking and/or increase the stopping distance. Either result may increase the risk of a vehicle crash.

Remedy: Navistar has already notified all affected owners about the defect during the course of the 2012 campaign that did not launch due to parts delays. The remedy began on September 12, 2013. Dealers will replace the S-Cam tube bracket assemblies, free of charge. Owners may contact Navistar at 1-800-448-7825. Navistar's number for this recall is 12530. This recall supersedes recall 12V-546.

Reported: 2015-07-08 (July 8, 2015) · Model years: 2013, 2014, 2015

Navistar, Inc. (Navistar) is recalling certain model year 2013-2015 International TranStar vehicles manufactured April 10, 2012, to December 12, 2014. Excessive engine crankcase pressures may cause the 90-degree elbow of the vent tube assembly to detach from the crankcase ventilation breather, possibly allowing engine oil to come into contact with hot surfaces.

Consequence: If engine oil comes into contact with a hot surface, there is an increased risk of a fire.

Remedy: Cummins will notify owners on behalf of Navistar, and dealers will secure the ends of the 90-degree elbow. In addition, the electronic control module (ECM) will be reprogrammed with software that can adjust the engine output under misfire conditions to limit crankcase pressures. These repairs will be performed free of charge. The recall began on June 16, 2015. Owners may contact Navistar customer service at 1-800-448-7825, or Cummins customer service at 1-800-343-7357.

Reported: 2015-11-20 (November 20, 2015) · Model years: 2013, 2014

Navistar, Inc. is recalling certain model year 2013-2014 International ProStar and DuraStar trucks manufactured April 26, 2012, to April 4, 2013, WorkStar trucks manufactured April 27, 2012, to March 29, 2013, LoneStar trucks manufactured May 21, 2012, to April 2, 2013, and TranStar trucks manufactured April 30, 2012, to March 25, 2013. In the affected vehicles, the accelerator pedal position sensor can move and result in a high engine idle.

Consequence: A high engine idle may make downshifting the transmission difficult and the engine brake may be disabled. These factors may hinder slowing down the truck when descending a long grade, thereby increasing the risk of a crash.

Remedy: Navistar will notify owners, and dealers will recalibrate the electronic control module (ECM) to allow it to recognize that the pedal is at the idle position, free of charge. The recall began on January 19, 2016. Owners may contact Navistar customer service at 1-800-448-7825. Navistar's number for this recall is 15517.

Reported: 2014-04-17 (April 17, 2014) · Model years: 2014, 2015

Navistar, Inc. (Navistar) is recalling certain model year 2013-2015 International DuraStar vehicles manufactured November 2012 through December 2013, International WorkStar vehicles manufactured December 2012 through January 2014, and 2014-2015 International TranStar and International ProStar vehicles manufactured January 2013 through February 2014. The affected vehicles are built with air disc brake feature codes 04WEY, 04WEZ, or 04WZK. These vehicles may have an incorrect number of bolts mounting the brake caliper to the caliper mounting plate and some of the bolts may be improperly torqued.

Consequence: If the air disk brake caliper has loose or missing bolts, the air disk brake caliper may come loose from the mounting plate causing the vehicle to pull left or right while braking and lengthening the distance needed to stop, increasing the risk of a crash.

Remedy: Navistar will notify owners, and dealers will replace any missing bolts and check the torque of all of the air disk brake caliper bolts, free of charge. The recall began on May 7, 2014. Owners may contact Navistar customer service at 1-800-448-7825. Navistar's number for this recall is 14508.

Reported: 2014-04-03 (April 3, 2014) · Model years: 2014

Navistar, Inc. (Navistar) is recalling certain model year 2014 International TranStar trucks manufactured in March 2013 and equipped with certain Cummins Westport Model ISL G compressed natural gas engines (feature code 12CBA). Condensation in the intake manifold may freeze during cold weather conditions and interfere with the proper operation of the intake manifold pressure sensor.

Consequence: The improper operation of the sensor could induce elevated exhaust temperatures or flames from the exhaust pipe, increasing the risk of a vehicle fire or burn injury to a person near the exhaust pipe.

Remedy: Cummins Inc. and Cummins Wesport Inc. will notify owners, and authorized Cummins service facilities will upload a new ECM calibration, free of charge. The recall began during April 2014. Owners may contact Cummins Inc. at 1-800-343-7357 or Navistar customer service at 1-331-332-5000.

Reported: 2015-11-16 (November 16, 2015) · Model years: 2014, 2015

Navistar, Inc. (Navistar) is recalling certain model year 2014-2015 International TranStar vehicles manufactured March 5, 2013, to December 12, 2014, equipped with certain Cummins Westport ISL G engines manufactured September 13, 2007, to September 23, 2015. These engines have a turbocharger oil supply line that may contact or interfere with the turbocharger inlet elbow, clean air intake clamp, or the air fuel control tube, and result in an oil leak.

Consequence: If the turbocharger oil supply line oil leaks in the proximity of the engine exhaust manifold there would be an increased risk of a fire.

Remedy: Navistar will notify owners, and dealers will inspect for oil supply line interference or damage, eliminating the interference and replacing the oil supply line, as necessary, free of charge. The recall began on November 23, 2015. Owners may contact Navistar customer service at 1-331-332-1590, or Cummins customer service at 1-800-343-7357.

Reported: 2014-09-29 (September 29, 2014) · Model years: 2015

Navistar, Inc. (Navistar) is recalling certain model year 2015 International TranStar vehicles manufactured April 2, 2014, to June 18, 2014. In the affected vehicles, the nut that fastens the lower clutch rod to the bell crank arm may not have been installed or tightened to the specified torque.

Consequence: A missing or insufficiently tightened nut could cause the lower clutch rod to separate from the bell crank arm, making it difficult to shift the transmission. If the lower clutch rod separates while the vehicle is stopped and the clutch pedal is depressed with the engine running, or it separates during deceleration, the vehicle may lunge unexpectedly in the direction of the selected gear. Any of these scenarios increase the risk of a crash.

Remedy: Navistar has notified owners, and dealers will replace any missing lower clutch rod nut, and verify that the nut is correctly torqued, free of charge. The recall began in late October 2014. Owners may contact Navistar customer service at 1-800-448-7825. Navistar's number for this recall is 14515.

Reported: 2015-03-23 (March 23, 2015) · Model years: 2015

Navistar, Inc. (Navistar) is recalling certain model year 2015-2016 International 9900, DuraStar, LoneStar, PayStar, ProStar, WorkStar and 2015 International TranStar and IC Bus CE vehicles equipped with a Haldex air braking system. The affected brake actuators may have been manufactured with an incomplete attachment of the internal rubber diaphragm to the actuation mechanism. This could cause dragging or overheated brakes.

Consequence: If the brakes drag and overheat there is an increased risk of a wheel end fire.

Remedy: Navistar will notify owners, and dealers will replace the Haldex Life Seal Brake chambers, free of charge. The recall began on June 19, 2015. Owners may contact Navistar customer service at 1-800-448-7825. Navistar's number for this recall is 15504. Note: This recall supersedes recall 14V-806.

Reported: 2015-10-23 (October 23, 2015) · Model years: 2016

Navistar, Inc. (Navistar) is recalling certain model year 2016 International ProStar trucks manufactured January 5, 2015, to January 7, 2015, and 2016 International TranStar trucks manufactured on January 6, 2015, and equipped with certain Eaton Fuller FR-Series 10-speed manual transmissions. When the transmission shift lever is moved from reverse to neutral, the reverse gear may stay engaged. When the transmission shift lever is moved from reverse to a forward gear position, the transmission may mechanically lock because both the reverse gear and forward gear are simultaneously engaged.

Consequence: Even though the transmission has been shifted out of reverse into neutral, the vehicle may unexpectedly move backwards, increasing the risk of a crash.

Remedy: Navistar will notify owners, and dealers will inspect the transmission. Any affected transmission will be repaired or replaced, free of charge. The recall began on November 20, 2015. Owners may contact Navistar customer service at 1-800-343-7357. Navistar's number for this recall is 15516.

Reported: 2017-09-20 (September 20, 2017) · Model years: 2016

Navistar, Inc. (Navistar) is recalling certain 2016 International DuraStar, LoneStar, ProStar, TerraStar, TranStar, WorkStar, 9900i, and IC Bus HC vehicles equipped with certain Spicer D or E series steer axles. The castellated nut on the steer axles may not be properly torqued, allowing the tie rod to loosen.

Consequence: If the tie rod loosens, it may disconnect from the steering knuckle, causing a complete loss of steering, increasing the risk of a crash.

Remedy: Navistar will notify owners, and dealers will inspect the torque of the castellated nut and tie rod, tightening it as necessary, free of charge. The recall began on November 8, 2017. Owners may contact Navistar customer service at 1-331-332-1590. Navistar's number for this recall is 17507.

Reported: 2023-04-06 (April 6, 2023) · Model years: 2016, 2017

Navistar, Inc. (Navistar) is recalling certain 2016-2017 International TranStar, 2017-2019 International ProStar, International LoneStar, 2017-2020 International DuraStar, WorkStar, and 2018-2019 IC Bus HC Commercial buses. The heating, ventilation, and air-conditioning (HVAC) blower motor circuit may have an insufficient wiring terminal that can overheat.

Consequence: An overheated electrical circuit can increase the risk of a fire.

Remedy: Dealers will replace the HVAC blower motor load circuit wiring terminal, free of charge. Owner notification letters are expected to be mailed June 5, 2023. Owners may contact Navistar's customer service at 1-800-448-7825. Navistar's number for this recall is 23510.

Reported: 2016-12-28 (December 28, 2016) · Model years: 2017

Navistar, Inc. (Navistar) is recalling certain 2017 International ProStar, LoneStar, 9900i, and TranStar trucks. The affected vehicles have a metallic battery cover latch that may unlatch and contact the battery jump start stud, causing an electrical short to ground if the jump start stud is not covered.

Consequence: An electrical short to ground increases the risk of a fire.

Remedy: Navistar will notify owners, and dealers will install a latch stop to prevent the latch from rotating to the unlatched position, free of charge. The recall began on January 27, 2017. Owners may contact Navistar customer service at 1-800-448-7825. Navistar's number for this recall is 16513.

Reported: 2018-05-03 (May 3, 2018) · Model years: 2018

Navistar, Inc. (Navistar) is recalling certain 2018-2019 International WorkStar, DuraStar, LoneStar, LT, ProStar, RH and IC Bus HC, 2018 International TranStar, 2019 International HV and MV trucks and transit buses. The front driver and passenger seat belt anchor D-ring bolt may break in the event of a crash. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 210, "Seat Belt Assembly Anchorages."

Consequence: If the D-ring bolt breaks during a crash, the seat occupant may not be properly restrained, increasing their risk of injury.

Remedy: Navistar has notified owners, and dealers will replace the D-ring bolt depending on the information found on the seat belt label, free of charge. The recall began May 23, 2018. Owners may contact Navistar customer service at 1-800-448-7825. Navistar's number for this recall is 18505.

Reported: 2018-11-21 (November 21, 2018) · Model years: 2018

Navistar, Inc. (Navistar) is recalling certain 2019 International HV, MV, 2018-2019 HX, LT, RH, LoneStar, ProStar, WorkStar, and 2018 TranStar automated manual transmission vehicles, equipped with certain Eaton ECA heavy-duty truck clutches. An internal component in the clutch assembly may fail, possibly resulting in unintended vehicle movement.

Consequence: Unintended vehicle movement can increase the risk of a crash.

Remedy: Navistar will notify owners, and dealers will recalibrate the Transmission Control Module (TCM), free of charge. The recall began January 18, 2019. Owners may contact Navistar customer service at 1-800-448-7825. Navistar's number for this recall is 18518.