Dodge 400 recalls by model year
Explore the records behind recurring owner reports.
Key facts
0 owner complaints analyzed
7 distinct recall campaigns
Not available median reported failure mileage
Scope: 1982 to 1983 model years. Data snapshot: . 0 complaints include usable failure mileage.
Recalls by model year
All campaigns in the snapshot affecting each model year, including recalls announced years later.
Recall campaigns
Shared campaigns appear once in each affected model year.
| Category | Count |
|---|---|
| 1982 | 3 |
| 1983 | 5 |
1982: 3; 1983: 5
Year-by-year records
Recall history
7 distinct campaigns affect this selection. Announcement dates below are different from vehicle model years. A campaign may cover multiple years.
82V055000 · Suspension:Front:Control Arm:Lower Ball Joint
Reported: 1982-05-27 (May 27, 1982) · Model years: 1982
CLAMP BOLTS INSTALLED ON CERTAIN VEHICLES MAY CONTAIN CRACKS. EVENTUALLY THESE BOLTS MAY BREAK THROUGH, CAUSING SEPARATION OF THE BALL JOINT FROM THE STEERING KNUCKLE.
Remedy: DEALER WILL REPLACE BOTH BALL JOINT STUD CLAMP BOLTS WITHOUT CHARGE TO OWNER.
NHTSA campaign record ↗82V063000 · Service Brakes, Hydraulic:Fluid
Reported: 1982-06-15 (June 15, 1982) · Model years: 1982
THE BRAKE HYDRAULIC SYSTEM BAY BE EQUIPPED WITH BRAKE FLUID CONTAINING AN EXCESS OF WATER.
Remedy: DEALER WILL REPLACE DEFECTIVE BRAKE FLUID WITHOUT CHARGE TO OWNER.
NHTSA campaign record ↗89V052000 · Suspension:Front:Control Arm:Lower Arm
Reported: 1989-03-29 (March 29, 1989) · Model years: 1982, 1983
FRONT SUSPENSION CROSSMEMBER MAY CORRODE AND FAIL AT LOWER CONTROL ARM REAR PIVOT MOUNTS IF OPERATED WHERE SALT IS USED TO AID IN SNOW REMOVAL.
Consequence: CONTROL ARM COULD DETACH FROM THE CROSSMEMBER, ADVERSELYAFFECTING DIRECTIONAL STABILITY, WHICH COULD RESULT IN AN ACCIDENT.
Remedy: INSTALL ATTACHMENT REINFORCEMENT BRACKETS TO PREVENT CONTROL ARM DETACHMENT AS A RESULT OF CORROSION WEAKENING.
NHTSA campaign record ↗82V085000 · Service Brakes, Hydraulic:Foundation Components:Hoses, Lines/Piping, And Fittings
Reported: 1982-09-09 (September 9, 1982) · Model years: 1983
ON THE INVOLVED VEHICLES, IMPROPER ROUTING OF THE HYDRAULIC BRAKE TUBE COULD CAUSE IT TO CHAFE AGAINST THE PARK BRAKE CABLES. EVENTUALLY, THE BRAKE TUBE MAY FAIL AND BRAKE FLUID LEAKAGE MAY OCCUR.
Remedy: DEALER WILL REROUTE THE HYDRAULIC BRAKE TUBE, IF NECESSARY, WITHOUT CHARGE TO OWNER.
NHTSA campaign record ↗82V092000 · Equipment:Electrical
Reported: 1982-09-24 (September 24, 1982) · Model years: 1983
THE TRAVEL COMPUTER SYSTEM WIRING, ON THE INVOLVED VEHICLES, MAY BE IMPROPERLY CONNECTED. THIS CONDITION CAN CAUSE DAMAGE TO INTERNAL COMPONENTS.
Remedy: THE WIRING WILL BE RECONNECTED TO ENSURE PROPER FUNCTIONING OF IGNITION SYSTEM..
NHTSA campaign record ↗82V123000 · Service Brakes, Hydraulic:Foundation Components:Hoses, Lines/Piping, And Fittings
Reported: 1982-12-09 (December 9, 1982) · Model years: 1983
HYDRAULIC BRAKE TUBING ROUTED TO THE LEFT REAR WHEEL BRAKE SYSTEM MAY HAVE BEEN BENT OUT OF SHAPE DURING ASSEMBLY AND COULD CHAFE AGAINST THE EXHAUST SYSTEM HANGER BOLT.
Remedy: DEALER WILL INSPECT AND RELOCATE TUBE, IF NECESSARY. A RETAINING CLIP WILL BE INSTALLED TO ENSURE ADEQUATE CLEARANCE FOR THE TUBING; ANY DAMAGED TUBES WILL ALSO BE REPLACED.
NHTSA campaign record ↗83V060000 · Service Brakes, Hydraulic:Foundation Components:Hoses, Lines/Piping, And Fittings
Reported: 1983-06-06 (June 6, 1983) · Model years: 1983
LOCATION OF HYDRAULIC BRAKE TUBE TO BOTH REAR WHEELS CAUSES INTERFERENCE AND CHAFING BETWEEN THE TUBES AND REAR SUSPENSION TRAILING ARM PIVOT BRACKETS.
Remedy: DEALER WILL INSPECT REAR WHEEL BRAKE TUBES AND REROUTE TO ENSURE PROPER TUBE TO PIVOT BRACKET CLEARANCE. ANY DAMAGED TUBES WILL ALSO BE REPLACED.
NHTSA campaign record ↗