Bmw 530 recalls by model year
Explore the records behind recurring owner reports.
Key facts
16 owner complaints analyzed
3 distinct recall campaigns
121,000 mi median reported failure mileage
Scope: 1975 to 2002 model years. Data snapshot: . 4 complaints include usable failure mileage.
Recalls by model year
All campaigns in the snapshot affecting each model year, including recalls announced years later.
Recall campaigns
Shared campaigns appear once in each affected model year.
| Category | Count |
|---|---|
| 1994 | 0 |
| 1995 | 0 |
| 1999 | 0 |
| 2001 | 1 |
| 2002 | 1 |
1994: 0; 1995: 0; 1999: 0; 2001: 1; 2002: 1
Year-by-year records
Recall history
3 distinct campaigns affect this selection. Announcement dates below are different from vehicle model years. A campaign may cover multiple years.
77V066000 · Visibility:Power Window Devices And Controls
Reported: 1977-05-06 (May 6, 1977) · Model years: 1975, 1976, 1977
THE INVOLVED VEHICLES DO NOT COMPLY WITH FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 118, "POWER-OPERATED WINDOW SYSTEMS". THE POWER-OPERATED WINDOW SYSTEM WAS EQUIPPED IN ERROR WITH A RELAY WHICH MAKES IT POSSIBLE TO OPERATE THE WINDOWS WHEN THE IGNITION KEY IS SWITCHED OFF, OR REMOVED.
Remedy: DEALER WILL MODIFY THE ELECTRICAL SYSTEM BY REMOVING THE RELAY FROM THE POWER WINDOW SYSTEM TO PRECLUDE OPERATION OF THE WINDOWS WHEN THE IGNITION KEY IS NOT TURNED ON OR IS REMOVED ENTIRELY.
NHTSA campaign record ↗78V056000 · Tires
Reported: 1978-03-13 (March 13, 1978) · Model years: 1978
DUE TO A MATERIAL STUCTURAL DEFECT, THE RUBBER SEAL BETWEEN THE METAL VALVE STEM AND RIM ALLOWS SLOW SEEPAGE OF AIR AROUND THE VALVE BASE.
Remedy: THE DEALER WILL REPLACE DEFECTIVE METAL TIRE VALVE STEMS AND RUBBER SEALS WITH NEW ONES, AT NO COST TO THE CUSTOMER.
NHTSA campaign record ↗17V047000 · Air Bags:Frontal:Driver Side:Inflator Module
Reported: 2017-01-20 (January 20, 2017) · Model years: 2001, 2002
BMW of North America, LLC (BMW) is recalling certain 2000-2002 BMW 320i, 323i, 325i, 325xi, 330i, 330xi, 323Ci, 325Ci, 330Ci, M3, 323iT, 325iT and 325xiT vehicles, 2001-2002 525i, 530i, 540i, M5, 525iT and 540iT vehicles, and 2001-2003 X5 3.0i, X5 4.4i, and X5 4.6is vehicles. These vehicles may have had a driver-side air bag module installed as replacement equipment such as after a vehicle crash necessitating replacement of the original air bag, or as a remedy part for a prior recall. These replacement modules contain an air bag inflator that may rupture due to propellant degradation occurring after long-term exposure to lower absolute humidity, temperature and temperature cycling.
Consequence: In the event of a crash necessitating deployment of the driver's frontal air bag, the inflator could rupture with metal fragments striking the driver or other occupants resulting in serious injury or death.
Remedy: Owners are advised not to drive their vehicles until the vehicle has been remedied. BMW will notify owners, and dealers will inspect the driver side air bag module, replacing it as necessary, free of charge. The recall began March 15, 2017. Owners may contact BMW customer service at 1-800-525-7417.
NHTSA campaign record ↗