Altec L SERIES AERIAL DEVICE recalls by model year
Explore the records behind recurring owner reports.
Key facts
0 owner complaints analyzed
3 distinct recall campaigns
Not available median reported failure mileage
Scope: 1999 to 2022 model years. Data snapshot: . 0 complaints include usable failure mileage.
Recalls by model year
All campaigns in the snapshot affecting each model year, including recalls announced years later.
Recall campaigns
Shared campaigns appear once in each affected model year.
| Category | Count |
|---|---|
| 2006 | 1 |
| 2007 | 1 |
| 2008 | 1 |
| 2009 | 1 |
| 2010 | 1 |
| 2011 | 1 |
| 2012 | 1 |
| 2013 | 1 |
| 2014 | 1 |
| 2015 | 1 |
| 2016 | 1 |
| 2017 | 1 |
| 2018 | 1 |
| 2019 | 2 |
| 2020 | 1 |
| 2021 | 2 |
| 2022 | 1 |
2006: 1; 2007: 1; 2008: 1; 2009: 1; 2010: 1; 2011: 1; 2012: 1; 2013: 1; 2014: 1; 2015: 1; 2016: 1; 2017: 1; 2018: 1; 2019: 2; 2020: 1; 2021: 2; 2022: 1
Year-by-year records
Recall history
3 distinct campaigns affect this selection. Announcement dates below are different from vehicle model years. A campaign may cover multiple years.
23V433000 · Equipment:Mechanical:Boom/Crane/Ladder
Reported: 2023-06-16 (June 16, 2023) · Model years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Altec Industries, Inc. (Altec) is recalling certain 1999-2022 L Series and LR Series aerial devices. A hydraulic hose may have been installed between the cylinder port and load-holding valve instead of metallic tubing, which can result in a damaged hydraulic hose and failure of the load-holding feature.
Consequence: Failure of the load-holding feature can result in unintended movement of the platform or load, increasing the risk of injury.
Remedy: Altec will inspect the units for a hydraulic hose and replace it with specified metallic tubing, as necessary, free of charge. Owner notification letters are expected to be mailed August 11, 2023. Owners may contact Altec customer service 1-877-462-5832. Altec's number for this recall is CSN 3090.
NHTSA campaign record ↗25V400000 · Electrical System:Wiring:Power Distribution Module/Ipdm
Reported: 2025-06-13 (June 13, 2025) · Model years: 2019
Altec Industries, Inc. (Altec) is recalling certain 2020 TA Series, 2019 L Series Aerial Device, 2018-2025 Service Body, LS Series, and AT Series trucks. The Power Distribution Module (PDM 10) circuit may experience a voltage spike, which can damage the Transfer Case Control Module (TCCM) and disrupt chassis functions, including the PTO switch, rearview mirror, or rearview camera.
Consequence: A damaged TCCM and disrupted chassis functions can result in a loss of handling and control or brake performance, increasing the risk of a crash.
Remedy: Altec will install a diode to the ignition hot circuit, free of charge. Owner notification letters were mailed August 8, 2025. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN-3229.
NHTSA campaign record ↗26V310000 · Equipment:Mechanical:Boom/Crane/Ladder:Controls/Control Wiring
Reported: 2026-05-15 (May 15, 2026) · Model years: 2021
Altec Industries, Inc. (Altec) is recalling certain 2022-2025 AT Series, 2021-2025 AN Series Aerial Device, 2020-2026 TA Series Aerial Device, 2021 L Series Aerial Device, 2021 LR Series Aerial Device, 2023-2025 AM Series Aerial Device, and 2024-2025 AA Series Aerial Device vehicles. The ground level emergency stop (E-stop) may not stop hydraulic functions of the machine when the machine is in ePTO mode.
Consequence: Hydraulic functions that do not immediately stop when the ground level E-stop is pressed, increase the risk of injury.
Remedy: Altec will inspect the units and test to verify the E-stop function. If the wiring is found to be incorrect, it will be updated, free of charge. Letters informing owners of the safety risk were mailed on July 8, 2026. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN-3322.
NHTSA campaign record ↗