Altec AT30-G recalls by model year
Explore the records behind recurring owner reports.
Key facts
0 owner complaints analyzed
3 distinct recall campaigns
Not available median reported failure mileage
Scope: 2010 to 2022 model years. Data snapshot: . 0 complaints include usable failure mileage.
Recalls by model year
All campaigns in the snapshot affecting each model year, including recalls announced years later.
Recall campaigns
Shared campaigns appear once in each affected model year.
| Category | Count |
|---|---|
| 2010 | 1 |
| 2011 | 1 |
| 2012 | 2 |
| 2013 | 1 |
| 2016 | 1 |
| 2017 | 1 |
| 2018 | 1 |
| 2019 | 1 |
| 2020 | 1 |
| 2021 | 1 |
| 2022 | 1 |
2010: 1; 2011: 1; 2012: 2; 2013: 1; 2016: 1; 2017: 1; 2018: 1; 2019: 1; 2020: 1; 2021: 1; 2022: 1
Year-by-year records
Recall history
3 distinct campaigns affect this selection. Announcement dates below are different from vehicle model years. A campaign may cover multiple years.
13V458000 · Equipment | Engine And Engine Cooling:Exhaust System
Reported: 2013-09-26 (September 26, 2013) · Model years: 2010, 2011, 2012, 2013
Altec Industries, Inc. (Altec) is recalling certain model year 2010-2013 AT200A, AT235, AT235P, AT30-G, AT35-G, AT37-G, AT40-G and AT237 Aerial Devices mounted on Ford Super Duty Chassis' equipped with 6.8L gas engines and Muncie FR67 power take offs (PTO). In the affected vehicles, oil may leak from the PTO pressure switch onto a thermal blanket covering the exhaust.
Consequence: Oil leaking onto the thermal blanket combined with heat from exhaust may result in an increased risk of fire.
Remedy: Altec will notify owners, and dealers will replace the affected pressure switch and thermal blanket with the kit identified by Muncie, free of charge. The recall began on December 9, 2013. Consumerr's may contact Altec at 1-877-462-5832. Altec's recall number is CSN 583.
NHTSA campaign record ↗12V390000 · Suspension:Front:Springs:Torsion Bar
Reported: 2012-08-08 (August 8, 2012) · Model years: 2012
Altec Industries, Inc. is recalling certain model year 2012 Aerial Device vehicles built on a Navistar Terrastar chassis because the Altec-installed torsion bar increases the ride height of the front suspension, which when the vehicle hits bumps, may cause the vehicle to alter its steering direction.
Consequence: As the vehicle hits bumps, it may deviate from the intended line of travel, increasing the risk of a crash.
Remedy: Altec will notify owners, and will install an updated bracket and spring kit, free of charge. The safety recall began on August 27, 2012. Owners may contact Altec Industries at 1-877-462-5832.
NHTSA campaign record ↗22V469000 · Electrical System
Reported: 2022-06-30 (June 30, 2022) · Model years: 2016, 2017, 2018, 2019, 2020, 2021, 2022
Altec Industries Inc. (Altec) is recalling certain 2016-2022 van mounted AT200A and AT30G vehicles. The ground-fault circuit interrupter (GFCI) outlet may not provide adequate circuit protection against an electrical overload condition.
Consequence: An overloaded electrical circuit can increase the risk of a fire.
Remedy: Altec will install a new GFCI outlet with a circuit-breaker and new wiring, free of charge. Owner notification letters are expected to be mailed August 29, 2022. Owners may contact Altec's customer service at 205-991-7733. Altec's number for this recall is CSN 3008.
NHTSA campaign record ↗