vehicle signal
U.S. public vehicle records

Altec AT237 recalls by model year

Explore the records behind recurring owner reports.

Key facts

0 owner complaints analyzed

4 distinct recall campaigns

Not available median reported failure mileage

Scope: 2006 to 2013 model years. Data snapshot: . 0 complaints include usable failure mileage.

Compare model years

Recalls by model year

All campaigns in the snapshot affecting each model year, including recalls announced years later.

Recall campaigns

Shared campaigns appear once in each affected model year.

2006
1
2007
1
2008
1
2010
2
2011
2
2012
2
2013
2
Recall campaigns data
CategoryCount
20061
20071
20081
20102
20112
20122
20132

2006: 1; 2007: 1; 2008: 1; 2010: 2; 2011: 2; 2012: 2; 2013: 2

Year-by-year records

Altec AT237 model-year comparison
Model yearComplaintsRecallsChange in recalls
200601Not available
2007010
2008010
201002Not available
2011020
2012020
2013020

Recall history

4 distinct campaigns affect this selection. Announcement dates below are different from vehicle model years. A campaign may cover multiple years.

11V197000 · Equipment

Reported: 2011-03-28 (March 28, 2011) · Model years: 2006, 2007, 2008

ALTEC IS RECALLING CERTAIN AT35-G, AT37-G, AT235, AND AT237 AERIAL DEVICES MANUFACTURED FROM JANUARY 2005 THROUGH OCTOBER 2008. THESE UNITS ARE EQUIPPED WITH BILLET STEEL COUNTERWEIGHT THAT IS WELDED IN PLACE. IN THE EVENT OF WELD FAILURE, THE COUNTERWEIGHT MAY FALL OUT WHILE TRAVELLING.

Consequence: IF THESE STEEL PIECES FALL IN THE PATH OF THE VEHICLE OR OTHER TRAFFIC, A VEHICLE CRASH INVOLVING DEATH OR SERIOUS INJURY MAY RESULT.

Remedy: ALTEC HAS DEVELOPED KITS TO IMPROVE THE ATTACHMENT OF THE BILLET STEEL COUNTERWEIGHTS. CUSTOMERS AT THEIR OPTION MAY PERFORM THE REPAIR OR HAVE A DEALER INSTALL THE KIT FREE OF CHARGE. THE SAFETY RECALL IS EXPECTED TO BEGIN DURING APRIL 2011. OWNERS MAY CONTACT ALTEC AT 1-877-462-5832.

NHTSA campaign record ↗
13V224000 · Electrical System:12v/24v/48v Battery:Cables

Reported: 2013-05-29 (May 29, 2013) · Model years: 2010, 2011, 2012

Altec Industries, Inc. is recalling certain model year 2010-2012 AT200A, AT235/235P, AT237, AT248F, AT35/37-G, and AT40-G aerial devices built on Ford F550 chassis with a gross vehicle weight rating of 19,500lbs. The battery cable going to the unit auxiliary functions could be damaged and possibly short to ground.

Consequence: If the battery cable shorts to ground, it may overheat, resulting in a fire.

Remedy: Altec began notifying affected owners on April 24, 2013. Dealers will re-route the auxiliary function battery cables. Owners may contact Altec at 1-800-860-0183. Altec's recall number is CSN 565.

NHTSA campaign record ↗
13V458000 · Equipment | Engine And Engine Cooling:Exhaust System

Reported: 2013-09-26 (September 26, 2013) · Model years: 2010, 2011, 2012, 2013

Altec Industries, Inc. (Altec) is recalling certain model year 2010-2013 AT200A, AT235, AT235P, AT30-G, AT35-G, AT37-G, AT40-G and AT237 Aerial Devices mounted on Ford Super Duty Chassis' equipped with 6.8L gas engines and Muncie FR67 power take offs (PTO). In the affected vehicles, oil may leak from the PTO pressure switch onto a thermal blanket covering the exhaust.

Consequence: Oil leaking onto the thermal blanket combined with heat from exhaust may result in an increased risk of fire.

Remedy: Altec will notify owners, and dealers will replace the affected pressure switch and thermal blanket with the kit identified by Muncie, free of charge. The recall began on December 9, 2013. Consumerr's may contact Altec at 1-877-462-5832. Altec's recall number is CSN 583.

NHTSA campaign record ↗
14V357000 · Suspension:Front:Springs:Torsion Bar

Reported: 2014-06-19 (June 19, 2014) · Model years: 2013

Altec Industries, Inc. (Altec) is recalling certain model year 2013 AT237, and 2013-2014 AT3X-G, AT40-G, and AT248F aerial trucks manufactured August 2013 through April 2014, built on Ford F-450 and F-550 chassis, and equipped with front "Stable Ride" torsion bars. These torsion bars have welds that could fail.

Consequence: If the torsion bar welds fail, the vehicle may become unstable, increasing the risk of injury to the operator using the aerial device.

Remedy: Altec will notify owners, and dealers will inspect the front torsion bars and replace any that have deficient welds, free of charge. The recall began in August 2014. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 599.

NHTSA campaign record ↗