vehicle signal
U.S. public vehicle records

Altec AT235 recalls by model year

Explore the records behind recurring owner reports.

Key facts

0 owner complaints analyzed

4 distinct recall campaigns

Not available median reported failure mileage

Scope: 2006 to 2013 model years. Data snapshot: . 0 complaints include usable failure mileage.

Compare model years

Recalls by model year

All campaigns in the snapshot affecting each model year, including recalls announced years later.

Recall campaigns

Shared campaigns appear once in each affected model year.

2006
1
2007
1
2010
2
2011
2
2012
3
2013
1
Recall campaigns data
CategoryCount
20061
20071
20102
20112
20123
20131

2006: 1; 2007: 1; 2010: 2; 2011: 2; 2012: 3; 2013: 1

Year-by-year records

Altec AT235 model-year comparison
Model yearComplaintsRecallsChange in recalls
200601Not available
2007010
201002Not available
2011020
201203+1
201301-2

Recall history

4 distinct campaigns affect this selection. Announcement dates below are different from vehicle model years. A campaign may cover multiple years.

10V399000 · Steering:Hydraulic Power Assist:Hose, Piping, And Connections

Reported: 2010-09-02 (September 2, 2010) · Model years: 2006, 2007

ALTEC IS RECALLING CERTAIN MODEL YEAR 2006-2007 AT200A, AT235, MODEL YEAR 2007-2010 AT235P AND MODEL YEAR 2008 AT3XG TRUCKS BUILT ON GM CHASSIS. THERE IS A POTENTIAL HYDRAULIC HOSE ROUTING CONDITION IN THE ENGINE COMPARTMENT. THE HOSE COULD CONTACT AND CAUSE SOME ABRASIONS TO AN OEM 12V CHASSIS WIRE OR POSSIBLY RUB ON THE STEEL POWER STEERING LINE WHICH MAY LEAD TO POSSIBLE DAMAGE OF THE HYDRAULIC LINE.

Consequence: THIS COULD RESULT IN A BURST HYDRAULIC HOSE DAMAGE WIRING, OR A FIRE.

Remedy: ALTEC WILL PROVIDE INSTRUCTIONS TO DEALERS ON HOW TO INSPECT AND INSTALL THE NEW BRACKET FREE OF CHARGE. THIS SERVICE WILL BE PERFORMED FREE OF CHARGE. THE SAFETY RECALL BEGAN ON SEPTEMBER 15, 2010. OWNERS MAY CONTACT ALTEC AT 1-877-462-5832.

NHTSA campaign record ↗
13V224000 · Electrical System:12v/24v/48v Battery:Cables

Reported: 2013-05-29 (May 29, 2013) · Model years: 2010, 2011, 2012

Altec Industries, Inc. is recalling certain model year 2010-2012 AT200A, AT235/235P, AT237, AT248F, AT35/37-G, and AT40-G aerial devices built on Ford F550 chassis with a gross vehicle weight rating of 19,500lbs. The battery cable going to the unit auxiliary functions could be damaged and possibly short to ground.

Consequence: If the battery cable shorts to ground, it may overheat, resulting in a fire.

Remedy: Altec began notifying affected owners on April 24, 2013. Dealers will re-route the auxiliary function battery cables. Owners may contact Altec at 1-800-860-0183. Altec's recall number is CSN 565.

NHTSA campaign record ↗
13V458000 · Equipment | Engine And Engine Cooling:Exhaust System

Reported: 2013-09-26 (September 26, 2013) · Model years: 2010, 2011, 2012, 2013

Altec Industries, Inc. (Altec) is recalling certain model year 2010-2013 AT200A, AT235, AT235P, AT30-G, AT35-G, AT37-G, AT40-G and AT237 Aerial Devices mounted on Ford Super Duty Chassis' equipped with 6.8L gas engines and Muncie FR67 power take offs (PTO). In the affected vehicles, oil may leak from the PTO pressure switch onto a thermal blanket covering the exhaust.

Consequence: Oil leaking onto the thermal blanket combined with heat from exhaust may result in an increased risk of fire.

Remedy: Altec will notify owners, and dealers will replace the affected pressure switch and thermal blanket with the kit identified by Muncie, free of charge. The recall began on December 9, 2013. Consumerr's may contact Altec at 1-877-462-5832. Altec's recall number is CSN 583.

NHTSA campaign record ↗
12V390000 · Suspension:Front:Springs:Torsion Bar

Reported: 2012-08-08 (August 8, 2012) · Model years: 2012

Altec Industries, Inc. is recalling certain model year 2012 Aerial Device vehicles built on a Navistar Terrastar chassis because the Altec-installed torsion bar increases the ride height of the front suspension, which when the vehicle hits bumps, may cause the vehicle to alter its steering direction.

Consequence: As the vehicle hits bumps, it may deviate from the intended line of travel, increasing the risk of a crash.

Remedy: Altec will notify owners, and will install an updated bracket and spring kit, free of charge. The safety recall began on August 27, 2012. Owners may contact Altec Industries at 1-877-462-5832.

NHTSA campaign record ↗