vehicle signal
U.S. public vehicle records

Altec AN SERIES AERIAL DEVICE recalls by model year

Explore the records behind recurring owner reports.

Key facts

0 owner complaints analyzed

3 distinct recall campaigns

Not available median reported failure mileage

Scope: 2019 to 2026 model years. Data snapshot: . 0 complaints include usable failure mileage.

Compare model years

Recalls by model year

All campaigns in the snapshot affecting each model year, including recalls announced years later.

Recall campaigns

Shared campaigns appear once in each affected model year.

2019
1
2020
1
2021
2
2022
2
2023
2
2024
2
2025
3
2026
1
Recall campaigns data
CategoryCount
20191
20201
20212
20222
20232
20242
20253
20261

2019: 1; 2020: 1; 2021: 2; 2022: 2; 2023: 2; 2024: 2; 2025: 3; 2026: 1

Year-by-year records

Altec AN SERIES AERIAL DEVICE model-year comparison
Model yearComplaintsRecallsChange in recalls
201901Not available
2020010
202102+1
2022020
2023020
2024020
202503+1
202601-2

Recall history

3 distinct campaigns affect this selection. Announcement dates below are different from vehicle model years. A campaign may cover multiple years.

26V541000 · Forward Collision Avoidance: Automatic Emergency Braking

Reported: 2026-08-21 (August 21, 2026) · Model years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026

Altec Industries, Inc. (Altec) is recalling certain 2019-2026 AN Series, 2023 AA Series, 2022-2026 Digger Derrick, and 2025 AM Series vehicles. The Bendix automatic braking system was not recalibrated after relocating the front radar box.

Consequence: An improperly calibrated system may have a delayed braking response, increasing the risk of a crash.

Remedy: Altec will update the collision mitigation system with the revised the parameters, recalibrate, and test the system, free of charge. Owner notification letters are expected to be mailed October 16, 2026. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN-3356.

NHTSA campaign record ↗
26V310000 · Equipment:Mechanical:Boom/Crane/Ladder:Controls/Control Wiring

Reported: 2026-05-15 (May 15, 2026) · Model years: 2021, 2022, 2023, 2024, 2025

Altec Industries, Inc. (Altec) is recalling certain 2022-2025 AT Series, 2021-2025 AN Series Aerial Device, 2020-2026 TA Series Aerial Device, 2021 L Series Aerial Device, 2021 LR Series Aerial Device, 2023-2025 AM Series Aerial Device, and 2024-2025 AA Series Aerial Device vehicles. The ground level emergency stop (E-stop) may not stop hydraulic functions of the machine when the machine is in ePTO mode.

Consequence: Hydraulic functions that do not immediately stop when the ground level E-stop is pressed, increase the risk of injury.

Remedy: Altec will inspect the units and test to verify the E-stop function. If the wiring is found to be incorrect, it will be updated, free of charge. Letters informing owners of the safety risk were mailed on July 8, 2026. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN-3322.

NHTSA campaign record ↗
25V650000 · Structure:Critical Fasteners | Engine And Engine Cooling:Exhaust System:Manifold/Header/Muffler/Tail Pipe

Reported: 2025-09-25 (September 25, 2025) · Model years: 2025

Altec Industries, Inc. (Altec) is recalling certain 2021-2025 AA Series, 2024-2025 AM Series, and 2025 AN Series aerial devices. The outrigger pad holder may have been installed too close to the exhaust outlet.

Consequence: The exhaust may overheat the outrigger pad, increasing the risk of a fire.

Remedy: Altec will instruct owners to inspect the outrigger pad holder placement. A kit to relocate the outrigger pad holder or exhaust outlet will be provided as necessary, free of charge. Owner notification letters were mailed November 21, 2025. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN-3252.

NHTSA campaign record ↗