Altec AM SERIES AERIAL DEVICE recalls by model year
Explore the records behind recurring owner reports.
Key facts
0 owner complaints analyzed
5 distinct recall campaigns
Not available median reported failure mileage
Scope: 2021 to 2026 model years. Data snapshot: . 0 complaints include usable failure mileage.
Recalls by model year
All campaigns in the snapshot affecting each model year, including recalls announced years later.
Recall campaigns
Shared campaigns appear once in each affected model year.
| Category | Count |
|---|---|
| 2021 | 1 |
| 2022 | 1 |
| 2023 | 2 |
| 2024 | 3 |
| 2025 | 5 |
| 2026 | 1 |
2021: 1; 2022: 1; 2023: 2; 2024: 3; 2025: 5; 2026: 1
Year-by-year records
Recall history
5 distinct campaigns affect this selection. Announcement dates below are different from vehicle model years. A campaign may cover multiple years.
26V071000 · Electrical System:Wiring:Power Distribution Module/Ipdm
Reported: 2026-02-06 (February 6, 2026) · Model years: 2021, 2022, 2023, 2024, 2025
Altec Industries, Inc. (Altec) is recalling certain 2021-2025 Digger Derrick and 2021-2025 AM Series Aerial Device vehicles. The chassis engine may start unintentionally due to a missing diode in the Altec power distribution module.
Consequence: An engine that starts unexpectedly increases the risk of injury to anyone near the engine compartment during maintenance operations.
Remedy: Altec will provide instructions to inspect the power distribution module for a diode, and provide a repair kit as necessary, free of charge. Owner notification letters were mailed March 27, 2026. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN-3281.
NHTSA campaign record ↗26V310000 · Equipment:Mechanical:Boom/Crane/Ladder:Controls/Control Wiring
Reported: 2026-05-15 (May 15, 2026) · Model years: 2023, 2024, 2025
Altec Industries, Inc. (Altec) is recalling certain 2022-2025 AT Series, 2021-2025 AN Series Aerial Device, 2020-2026 TA Series Aerial Device, 2021 L Series Aerial Device, 2021 LR Series Aerial Device, 2023-2025 AM Series Aerial Device, and 2024-2025 AA Series Aerial Device vehicles. The ground level emergency stop (E-stop) may not stop hydraulic functions of the machine when the machine is in ePTO mode.
Consequence: Hydraulic functions that do not immediately stop when the ground level E-stop is pressed, increase the risk of injury.
Remedy: Altec will inspect the units and test to verify the E-stop function. If the wiring is found to be incorrect, it will be updated, free of charge. Letters informing owners of the safety risk were mailed on July 8, 2026. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN-3322.
NHTSA campaign record ↗25V650000 · Structure:Critical Fasteners | Engine And Engine Cooling:Exhaust System:Manifold/Header/Muffler/Tail Pipe
Reported: 2025-09-25 (September 25, 2025) · Model years: 2024, 2025
Altec Industries, Inc. (Altec) is recalling certain 2021-2025 AA Series, 2024-2025 AM Series, and 2025 AN Series aerial devices. The outrigger pad holder may have been installed too close to the exhaust outlet.
Consequence: The exhaust may overheat the outrigger pad, increasing the risk of a fire.
Remedy: Altec will instruct owners to inspect the outrigger pad holder placement. A kit to relocate the outrigger pad holder or exhaust outlet will be provided as necessary, free of charge. Owner notification letters were mailed November 21, 2025. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN-3252.
NHTSA campaign record ↗26V243000 · Equipment:Mechanical:Boom/Crane/Ladder:Controls/Control Wiring | Equipment:Mechanical:Boom/Crane/Ladder:Turntable
Reported: 2026-04-16 (April 16, 2026) · Model years: 2025, 2026
Altec Industries, Inc. (Altec) is recalling certain 2025-2026 AM Series Aerial Device vehicles. The emergency stop switch located at the turntable is inoperative when the upper controls interlock is active and allows the upper and lower controls to remain powered when the emergency stop is depressed.
Consequence: An inoperative emergency stop switch increases the risk of injury.
Remedy: Altec will notify owners to inspect for the presence of an adapter harness. If installed, the owner will be instructed to notify Altec, and no further action is needed. If the harness is not installed, Altec will provide a kit to complete the repair, free of charge. Owner notification letters were mailed June 9, 2026. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN-3307.
NHTSA campaign record ↗26V541000 · Forward Collision Avoidance: Automatic Emergency Braking
Reported: 2026-08-21 (August 21, 2026) · Model years: 2025
Altec Industries, Inc. (Altec) is recalling certain 2019-2026 AN Series, 2023 AA Series, 2022-2026 Digger Derrick, and 2025 AM Series vehicles. The Bendix automatic braking system was not recalibrated after relocating the front radar box.
Consequence: An improperly calibrated system may have a delayed braking response, increasing the risk of a crash.
Remedy: Altec will update the collision mitigation system with the revised the parameters, recalibrate, and test the system, free of charge. Owner notification letters are expected to be mailed October 16, 2026. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN-3356.
NHTSA campaign record ↗